Processing of a Continuous Ceramic Fiber/Iron Alloy Composite
スポンサーリンク
概要
- 論文の詳細を見る
- Japan Institute of Metalsの論文
- 2002-04-01
著者
-
YAMAMOTO Koichi
Department of Geriatric Medicine, Osaka University Graduate School of Medicine
-
HIRATA Yoshihiro
Department of Gastroenterology, University of Tokyo
-
Sameshima Soichiro
Department of Chemistry, Biotechnology, and Chemical Engineering, Kagoshima University
-
SUEYOSHI Hidekazu
Department of Mechanical Engineering, Faculty of Engineering, Kagoshima University
-
末吉 秀一
鹿児島大学工学部機械工学科
-
Hirata Yoshihiro
Department Of Applied Chemistry And Chemical Engineering Faculty Of Engineering Kagoshima University
-
Hirata Yoshihiro
Department Of Advanced Nanostructured Materials Science And Technology Kagoshima University
-
MARUNO Tomohito
Department of Nano Structured and Advanced Materials, Graduate School of Science and Engineering, Ka
-
UCHIDA Shigeru
Steel Research Laboratory, Nippon Steel Corporation
-
HAMAUZU Shuichi
Plant and Machinery Division, Mishima Kosan Co., Ltd.
-
KURITA Sumihiko
Research and Development Division, Koransha Co., Ltd.
-
Sameshima Soichiro
Department Of Applied Chemistry And Chemical Engineering Faculty Of Engineering Kagoshima University
-
Sameshima Soichiro
Department Of Advanced Nanostructured Materials Science And Technology Kagoshima University
-
Uchida Shigeru
Steel Research Laboratory Nippon Steel Corporation
-
末吉 秀一
鹿児島大学大学院 理工学研究科
-
Sueyoshi Hidekazu
Department Of Mechanical Engineering Faculty Of Engineering Kagoshima University
-
Kurita Sumihiko
Research And Development Division Koransha Co. Ltd.
-
Hamauzu Shuichi
Technical Development Bureau Nippon Steel Corporation
-
Hamauzu Shuichi
Plant And Machinery Division Mishima Kosan Co. Ltd.
-
Maruno Tomohito
Department Of Mechanical Engineering Faculty Of Engineering Kagoshima University
-
Yamamoto K
Kyoto Univ. Kyoto Jpn
-
Yamamoto K
Department Of Materials Science And Engineering Tokyo Institute Of Technology
-
Yamamoto Koichi
Department Of Electrical Engineering Graduate School Of Engineering Nagoya University
-
Yamamoto Koichi
Department Of Electrical Engineering College Of Engineering University Of Osaka Prefecture
-
Yamamoto Koichi
Department of Applied Chemistry, Waseda University
関連論文
- 粉末冶金法で作成したCu/Fe合金こて先の特性
- Loss of ACE2 accelerates time-dependent glomerular and tubulointerstitial damage in streptozotocin-induced diabetic mice
- Au薄膜のマイクロ波加熱
- Electrochemical reforming of CH4-CO2 gas using porous Gd-doped ceria electrolyte with Ni and Ru electrodes
- Cell performance of strontium ruthenium oxide cathode/ Gd-doped ceria (GDC) electrolyte/ nickel-GDC anode system
- Effectiveness of IκB kinase inhibitors in murine colitis-associated tumorigenesis
- 鉛フリー銅合金生産システムのLCA
- 化合物法を用いた含鉛銅合金スクラップの鉛除去
- 鉛フリー青銅生産システムのLCA解析
- 化合物法による含鉛黄銅の鉛除去
- Grain size dependence of electrical properties of Gd-doped ceria
- Niをインサート材として用いた炭素材料と銅の固相接合
- 優れた制振性、強度特性および加工性を兼備した複合組織型制振鋼の開発
- Removal of Lead from Copper Alloy Scraps by Compound-Separation Method
- LCA of Manufacturing Lead-Free Copper Alloys
- 熱間工具材としてのFRM材の検討
- Pbフリーはんだによるこて先の消耗
- 圧痕法を用いた接合材料・複合材料における残留応力と強度の評価(材料力学(特性評価))
- C/Cコンポジットとニッケルの固相接合に及ぼす炭素繊維の配向および黒鉛化度の影響
- セラミック連続繊維強化Fe合金基複合材料のプロセッシング
- セラミック連続繊維/Fe 合金複合材料のプロセッシング
- 黒鉛とニッケルの固相接合に及ぼす接合圧縮応力の影響
- 黒鉛とインコネル718の固相接合
- 黒鉛とニッケルの固相接合
- メカニカルアロイングによる高炭素Fe-C系合金の作成
- SUS304のガス窒化挙動に及ぼす大気中予加熱の効果
- 黒鉛とオーステナイト系ステンレス鋼SUS304の固相接合
- Effect of Processing Conditions on Gas Nitriding of Austenitic Stainless Steels
- Effect of Preheating in Air on Gas Nitriding of Austenitic Stainless Steels
- オーステナイト系ステンレス鋼のガス窒化挙動に及ぼすプロセス条件の影響
- オーステナイト系ステンレス鋼のガス窒化挙動に及ぼす大気中予加熱の影響
- 黒鉛と機械構造用炭素鋼S45Cの固相接合
- SUS304のガス窒化挙動に及ぼす大気中予加熱の影響
- オ-ステナイト系ステンレス鋼のガス窒化挙動に及ぼす前処理加工の影響
- 時効硬化Al合金圧延材の微小疲労き裂伝ぱにおける異方性
- フェライト, マルテンサイトおよび黒鉛からなる三相鋼の引張強度および疲労強度
- 微小き裂の伝ぱ則による黒鉛鋼の疲労き裂伝ぱ抵抗の評価
- 亜共析黒鉛鋼の冷間鍛造性および冷間鍛造後の被削性
- 亜共析黒鉛鋼の延性破壊挙動
- 亜共析合金鋼の黒鉛化現象におよぼすオ-ステナイト化処理条件の影響--オ-ステナイト化後徐冷する場合
- 亜共析鋼におけるオ-ステナイトからの黒鉛析出現象
- 亜共析黒鉛鋼の疲労限度におよぼす組織学的因子の影響
- 亜共析黒鉛鋼の疲労き裂伝ぱ特性におよぼす組織学的因子の影響
- 亜共析黒鉛鋼の引張特性におよぼす組織学的因子の影響
- In_2O_3-SnO_2サスペンションのレオロジー性質と加圧〓過
- 透過型分析電子顕微鏡によるSi-Ti-C-O繊維 : ムライトマトリックス系複合材料の界面観察
- アルミニウムスクラップ溶湯からのマグネシウムの除去に及ぼすシラスの添加方法の影響
- 炭素とニッケルの固相接合に及ぼす黒鉛化度の影響
- ナノメーターサイズのSiC粉体の加圧濾過(秋季シンポジウム若手研究者論文)
- ナノ粒子コロイドサスペンションの特性
- 加圧濾過による水系炭化ケイ素サスペンションの成形
- 希土類酸化物を伴った炭化ケイ素の液相焼結と力学特性
- サマリウム固溶セリア電解質とサーメット電極からなる固体酸化物形燃料電池の電気化学特性
- 電気伝導度測定による二成分系成形体の微構造解析(第2報)
- サブマイクロメーターサイズ粉体を用いたSiCのプロセッシングと力学特性へ及ぼすナノメーターサイズSiC粉体の混合効果
- アルミナとイットリアを添加した炭化ケイ素の水系プロセッシング,加圧焼結及び力学特性
- 積層した織物(炭化ケイ素とアルミノケイ酸塩)/ムライトマトリックス複合材料の相,微構造及び力学物性に及ぼす熱処理の影響(第2報)
- 多成分系セラミックサスペンションの流動性, 成形性およびそれから得られる材料の微構造
- アルミナとイットリアを伴った炭化ケイ素のコロイドプロセッシングと力学特性
- 積層した織物(炭化ケイ素とアルミノケイ酸塩)/ムライトマトリックス複合材料の相,微構造及び力学物性に及ぼす熱処理の影響
- K_2O-Al_2O_3-SiO_2系モデル陶器の反応,微構造及び力学物性
- アルミナコロイド粒子の電気的性質,レオロジー及び充てん密度
- ACE2 Mutant Mice Increase Cardiac Angiotensin II and Increase Incidence of Heart Failure in Response to Pressure Overload (Heart Failure, Basic 7 (M), The 69th Annual Scientific Meeting of the Japanese Circulation Society)
- Relationship of Bradykinin B2 Receptor Gene Polymorphism with Essential Hypertension and Left Ventricular Hypertrophy
- Association between Hepatocyte Growth Factor Gene Polymorphism and Essential Hypertension
- Viscoelastic properties of flocculated alumina suspensions during pressure filtration
- Association between Angiotensin II Type 1 Receptor Gene Polymorphism and Essential Hypertension : the Ohasama Study
- Effects of microstructural factors and alloying elements on dezincification of brass
- Removal of lead from scrap brass
- Growth activity of gamma-glutmyltrans-peptidase (GGT) positive lesions of rat thyroid induced by diisopropanolnitrosamine (DIPN)
- INVERSE CORRELATION BETWEEN THYROID PEROXIDASE (TPO) AND GAMMA-GLUTAMYL TRANSPEPTIDASE (GGT) ACTIVITIES EXPRESSED IN DIISOPROPANOLNITROSAMINE (DIPN) INDUCED RAT THYROID LESIONS : AN ENZYME HISTOCHEMICAL STUDY
- Solid State Bonding of Graphite to S45C Steel
- Potassium distribution in black heartwood of sugi (Cryptomeria japonica) I : localization in axial parenchyma cells
- 器具・容器用Sn合金の諸特性におよぼすBiの影響
- Synthesis and electrical conductivity of La_Sr_Ru_Mg_O_ perovskite solid solution
- Synthesis of hydrogen-carbon monoxide fuel from methane-carbon dioxide mixed gases
- Processing of high performance silicon carbide(SiAlons and Non-oxides)
- Processing, damage tolerance and crack healing in the silicon carbide fabric-covered silicon carbide composite
- Thermal decomposition of ammonia over nickel/gadolinium-doped ceria cermet
- Processing of a Continuous Ceramic Fiber-Reinforced Iron Alloy
- Processing of a Continuous Ceramic Fiber/Iron Alloy Composite
- The Intersection Angles between N-Dimensional Stable and Unstable Manifolds in 2N-Dimensional Symplectic Mappings
- Differential Immunolocalization of Thyroglobulin (Tg) in the Follicular Epithelium of Rat Thyroid Glands and Its Kinetics under Thyrotropin (TSH) Stimulation : A Quantitative Immunoelectron Microscopic Analysis Using Post-Embedding Immunogold Technique
- メカニカルアロイングによるAl表面の鉄アルミナイドコーティング
- Consolidation behavior of nanometer-sized SiC particles with phenylalanine through pressure filtration at 1 MPa
- Exponentially Small Oscillation of 2-Dimensional Stable and Unstable Manifolds in 4-Dimensional Symplectic Mappings
- A Necessary Condition for Existence of Lie Symmetries in General Systems of Ordinary Differential Equations
- Effect of Preheating in Air on Gas Nitriding of SUS304 Stainless Steel
- Effect of preforms on the synthesis of micro β-SiC from phenol resin and silicon
- Optical Memory of Amorphous Au-Se-SnO_2 System
- Voltage Effent on Amorphous Optical Memory
- The counterregulating role of ACE2 and ACE2-mediated angiotensin 1-7 signaling against angiotensin II stimulation in vascular cells
- Strong suppression of the renin-angiotensin system has a renal-protective effect in hypertensive patients : High-dose ARB with ACE inhibitor (Hawaii) study
- Spectrophotometric Determination of Copper in Environmental Water Samples by the Solvent Extraction of an Ion-Association Complex of the Dichlorocuprate(I) Ion with Ethyl Violet
- 液体窒素槽内蒸着法によるウィスカ-の作成
- アルミニウム,ホウ酸アルミニウムウィスカーおよび固体潤滑剤からなる複合材料の摩擦・摩耗特性
- Solvent Extraction of Gallium(III)as Tetrachlorogallate(III)with Quaternary Ammonium Ions
- 低炭素低合金鋼の黒鉛化について
- Static and Dynamic Erosion Characteristics of High-Temperature Metal-Carborn Composite Materials under High-Flux Plasma Irradiation
- Study of Oxytocin Receptor in Human Myometrium Using Highly Specific 3H-Labeled Oxytocin