Prediction of Dispersion Characteristics and Rheology in Dense Slurries
スポンサーリンク
概要
- 論文の詳細を見る
The prediction of slurry viscosity for the suspensions with and without particle size distribution has become possible by using the suspension rheology model proposed in this study. The viscosity prediction model is based on Simha’s cell model, which is applicable to completely dispersed systems. It was certified experimentally that the Simha’s model was able to predict the slurry viscosity for the case of the suspensions with particle size distribution. The present suspension rheology model adopted the assumption that the effect of agglomeration appeared only for the cluster formation with the minimum sized particles, and the other larger particles were completely dispersed. Usui previously proposed the same type model, but the model is modified to give more accurate viscosity predictions. The present model makes the assumption that multi-breakup of inter-particle bonding occurs when a cluster breaks into two parts under a simple shear flow. It is demonstrated that the present model combined with the Simha’s cell model can be successfully used to predict the rheological behavior of slurries.Prediction of the maximum packing volume fraction with non-spherical particles has been one of the important problems in powder technology. The sphericity depending on the particle diameter was measured by means of an image processing instrument. An algorithm to predict the maximum packing volume fraction with non-spherical particles was proposed. The maximum packing volume fraction was used to predict the slurry viscosity with completely dispersed condition. For this purpose, Simha’s cell model was applied for the concentrated slurry with wide particle size distribution. Also, Usui’s model developed for aggregative slurries was applied to predict the non-Newtonian viscosity of dense calcium carbonate-water slurry and fly ash slurry. It was certified that the maximum packing volume fraction for non-spherical particles can be successfully used to predict the slurry viscosity, and this means indirectly the maximum packing volume fraction determined in this study may be reasonable.
- 社団法人 化学工学会の論文
- 2002-09-01
著者
-
Usui Hiromoto
Department Of Chemical Science And Engineering Kobe University
-
Usui Hiromoto
Department Of Applied Chemistry And Chemical Engineering Yamaguchi University
関連論文
- Emulsion Polymerization of Vinyl Acetate in a System of Two CSTR in Series
- Effect of the Composition and Coating Condition on the Structure and Performance of Catalyst Layer of PEFC
- Dispersion Control of Nano-Particles and the Effect of the Coating Condition on the Performance of Proton-Exchange Membrane Fuel Cells (PEMFCs)
- Structure Analysis of Drag-Reducing Surfactant Rod-Like Micelles with Fluorescence Probe
- Biaxial Extensional Characteristics of Drag-Reducing Surfactant Solution
- Surfactant Drag Reduction Caused by a Cationic Surfactant with Excess Addition of Counter-ions
- Particle Size Characteristics of Ice Slurry Treated with Surfactants and Brines
- A Folw Visualization Study on the Mechanism of Turbulent Drag Reduction by Surfactants
- Surfactant Drag Reduction in Internally-Grooved Rough Tubes
- EFFECT OF MOLECULAR STRUCTURE OF POLYSACCHARIDE ON THE STABILITY OF COAL-WATER MIXTURES
- DRAG REDUCTION AND HEAT TRANSFER REDUCTION BY CATIONIC SURFACTANTS
- COAGULATION AND DISPERSION CHARACTERISTICS OF COAL WATER MIXTURES IN HIGHER TEMPERATURE RANGE
- Viscosity Prediction of Dense Slurries Prepared by Non-Spherical Solid Particles
- Investigation of Thermal Properties of Na_2HPO_4 Hydrate Slurries for Evaluating Their Use as a Coolant in Absorption Chillers
- Agglomeration of Hydrate Particles in Aqueous Surfactant Solution with Counter-Ion
- Improvement of Thixotropy Model Analyzing Dispersion Characteristics of Fine Particles in Newtonian Molten Polymer
- Model analysis on dispersion characteristics of fine particles in Newtonian molten polymer
- Behavior of Fine Particle Agglomerates in a Newtonian Molten Polymer Under a Shear Flow
- Size Characteristics of Liposomes Formed in a Micro-Tube
- Mixing Mechanism of a Multi-Holed Static Mixer
- Optimization of Preparation and Drying Conditions of Titanium Dioxide Slurry for Coating on a Plastic Substrate
- Mixing Characteristics of Newtonian Fluid by a Multi-Holed Static Mixer
- Viscosity measuring technique for gas-solid suspensions
- Viscosity Prediction of Dense Slurries with Agglomerative Coal Particles
- Effect of Cetyldimethylbetaine Molecules on Agglomeration and Growth of Ice
- Hydrodynamics and Heat Transfer Characteristics of Drag-Reducing Trimethylolethane Solution and Suspension by Cationic Surfactant
- Turbulent flow in an isosceles triangular duct
- The Effect of Shear Rate on Heteroaggregation Behavior of Latex Polymers and Suspension Polymers in Aqueous Media
- The Effect of the Swelling Rate of Latex Particle on Assembly Morphology in Seed Coagulation by Monomer Droplets
- Preparation of Carbonized Biomass Water Mixture and Upgraded Coal Water Mixture
- Suppression of Ice Particle Growth and the Possibility of Energy Saving Latent Heat Transportation by Using Surfactant Additives
- Numerical Study on the Drawing of Polymer Optical Fibers in Steady State
- Improvement of Devolatilization and Control of Low-temperature Oxidation by Vacuum Drying and Tar Coating Treatments of Low-rank Coal
- F305 INTENSIFICATION OF DISSIMILARITY BETWEEN HEAT AND MOMENTUM TRANSFER IN A DUCT FLOW WITH TEMPERATURE-CONTROLLED INJECTION/SUCTION FROM THE WALLS(Control of turbulent mixing process)
- Numerical Computations on Heat Transfer Characteristics from the Cavity Bottom in Parallel Plates Swept by Viscoelastic Fluid
- Numerical Experiments on Heat Transfer Characteristics in a Cavity Swept by Visco-Elastic Fluid
- Prediction of Flow Characteristics of Whipped Cream under Pressurized Condition
- Effect of temperature on the fluidity of a coal water mixture
- Drag reduction with heterogeneous polymer injection into a turbulent pipe flow
- Turbulent round jet submerged in dilute drag reducing polymer solutions
- Structure Analysis of Drag-Reducing Surfactant Rod-Like Micelles with Fluorescence Probe
- Biaxial Extensional Characteristics of Drag-Reducing Surfactant Solution
- Prediction of Dispersion Characteristics and Rheology in Dense Slurries
- Fully developed turbulent mass transfer in a triangular duct with a narrow apex angle.
- Laser-doppler measurements of turbulence structure in a drag-reducing pipe flow with polymer injection.