Effects of High Magnetic Field and Tensile Stress on Martensitic Transformation Behavior and Microstructure at 4.2K in Fe-Ni-C Alloys
スポンサーリンク
概要
著者
-
KITAGUCHI Hitoshi
National Research Institute for Metals, Sengen
-
Nagai Kotobu
National Inst. Materials Sci. Tsukuba Jpn
-
UEHARA Mitsuru
National Research Institute for Metals
-
KITAGUCHI Hitoshi
Superconducting Materials Center, National Institute for Materials Science
-
OHTSUKA Hideyuki
National Institute for Materials Science
-
Nagai K
Metallurgical Processing Group Steel Research Center National Institute For Materials Science
-
Uehara M
Sumitomo Special Metals Co. Ltd. Osaka‐fu Jpn
-
KAJIWARA Setsuo
National Institute for Materials Science
-
Nagai Kotobu
National Inst. For Materials Sci.
-
Kitaguchi Hitoshi
National Institute For Materials Science
-
Kitaguchi Hitoshi
National Reserch Institute For Metals
-
Ohtsuka H
National Inst. For Materials Sci. Tsukuba Jpn
-
Ohtsuka H
Univ. Tokyo Tokyo Jpn
-
Ohtsuka Hideyuki
National Inst. For Materials Sci. Ibaragi Jpn
-
Ohtsuka Hideyuki
Tsukuba Magnet Laboratory National Institute For Materials Science
-
Ohtsuka Hideyuki
High Magnetic Field Station National Institute For Materials Science
-
Ohtsuka Hideyuki
Tsukuba Magnet Lab. National Research Institute For Metals
-
Ohtsuka Hideyuki
Department Of Metallurgy The University Of Tokyo
-
Ohtsuka Hideyuki
National Research Institute For Metals
関連論文
- Characteristics of the Cold-Rolling Texture in a Multi-Layered Material Composed of SUS301 and SUS420J2 Steels
- Improvement of Reproducibility of High Transport J_c for Bi_2Sr_2CaCu_2O_y/Ag Tapes by Controlling Bi Content
- Effect of Cooling Rate on Critical Current Density for Bi_2Sr_2CaCu_2O_/Ag Composite Tapes
- X-ray Diffraction Studies of Fe-N Bulk-Processed in a Magnetic Field Using Synchrotron Radiation
- Effect of Magnetic Field on γ→α' Martensitic Transformation and Magnetization of α' and α' Iron-Nitrides
- Applicability of Weibull Distribution to Description of Distributed Normalized Critical Current of Bent-Damaged Bi2223 Composite Tape
- Alignment of Ferrite Grains during Austenite to Ferrite Transformation in a High Magnetic Field
- 低炭素鋼の種々の微細組織における脆性破壊支配因子としての有効結晶粒径
- Fabrication of Bi_2Sr_2CaCu_2O_8 Tapes and Coils(High-T_c Superconducting Materials Research)
- Flux Pinning Characteristics in 180 MeV Cu^- Irradiated Bi_2Sr_2CaCu_2O_x
- Fabrication of a Bi-2212/Ag Pancake Coil Generating 6000 G at 4.2 K in 12 T
- Magnetic Properties of Pb-Doped Bi-Sr-Ca-Cu-O Superconductors : Electrical Properties Condensed Matter
- Magnetic Properties and Upper Critical Fields of Sintered Tl-Ca-Ba-Cu-O Supercouiductors : Electrical Properties of Condensed Matter
- Effect of Magnetic Field and High Pressure on the Superconductivity of the New High-T_c Oxide Bi-Sr-Ca-Cu-O : Electrical Properties of Condensed Matter
- Ferrite Grain Size Formed by Large Strain-High Z Deformation in a 0.15C Steel
- Effect of Nano-Scale Copper Sulfide Precipitation on Mechanical Properties and Microstructure of Rapidly Solidified Steel with Tramp Copper Element
- Macroscopic Quantum Tunneling in Ferromagnetic Particles
- The fiber components in the biaxially warm-deformed low-carbon steels
- Analysis of the dislocation structure in warm - deformed steels by the modified Warren - Averbach X - ray profile method
- Effect of Manganese Segregation on Fine-grained Ferrite Structure in Low-carbon Steel Slabs
- Improvement of strength-and-toughness balance of recycled steel through ultrarefinement of grain size
- オーステナイト粒径とひずみを変化させたときのフェライト粒組織 〜 再加熱鋳造材の場合 〜
- オーステナイト粒径とひずみを変化させたときのフェライト粒組織 - 再加熱鋳造材の場合 -
- Effect of Annealing on Tensile Properties of Ultrafine-Grained Steels Fabricated by Grooved Warm Rolling
- In-situ Observation of Intragranular Ferrite Nucleation at Oxide Particles
- Serration of Grain Boundary in Ni-30Fe Alloy through High Temperature Deformation
- Dynamic Restoration Process of Ni-30Fe alloy during Hot Deformation
- 温間多方向加工によって形成される微細フェライト粒組織
- Effect of Shear Deformation of Development of Fine-grained Ferrite Structures
- Microstructural Design through Multi-Direction Deformation
- Analysis on Refinement of Columnar γ Grain by Phosphorus in Continuously Cast 0.1mass% Carbon Steel
- Influence of Phosphorus on Solidification Structure in Continuously Cast 0.1mass% Carbon Steel
- 低炭素鋼CC材の柱状γ粒におけるPによる微細化効果
- 高P含有低炭素鋼CC材の組織に及ぼす凝固モードの影響
- Structure of Continuously Cast Slab of High Phosphorus 0.1mass%C Steel
- Subsurface Crack Generation in High-cycle Fatigue for High Strength Alloys
- Dynamic Recrystallization of Ferrite during Large Strain Warm Compression Of Ultra-Low Carbon Steel
- Classification of Microstructural Evolution During Single Pass-Large Strain-High Z Deformation of a 0.15 C Steel
- Effect of Deformation Temperature and Strain Rate on Evolution of Ultrafine Grained Structure through Single-Pass Large-Strain Warm Deformation in a Low Carbon Steel
- Strain-hardening due to Dispersed Cementite for Low Carbon Ultrafine-grained Steels
- 低炭素鋼の高Z大歪加工における超微細粒組織の形成
- Dynamic Restoration Process of Ni-30Fe Alloy during Hot Deformation
- 温間圧延によって製造した超微細フェライト+セメンタイト組織鋼板の特性
- セメンタイト粒子分散による低炭素超微細粒鋼のひずみ硬化設計
- オーステナイト粒径とひずみを変化させたときのフェライト粒組織 〜再加熱鋳造材の場合〜
- Strength - Ductility Balance of the Ultrafine - grained Ferrite and Cementite Structure
- Effect of Warm Deformation Temperature on Formation of Ultrafine - grained Ferrite Structure for a Low Carbon Si - Mn Steel
- Fine Ferrite Formation from Deformed Austenite with Different Grain Size
- Magnetization Measurements in Y-Ba-Cu-O Compound System
- Microstructural and Micro-textural Evolution during Single Pass High Z-large Strain Deformation of a 0.15C Steel
- Prediction on Nominal Stress-Strain Curve of Isotropic Polycrystal Ti-15-3-3-3 Sheet by FE Analysis
- Continuously cast 0.1wt% C steels with high phosphorus : microstructural design and control
- 高リン低炭素鋼ストリップ鋳片圧延材の機械的性質
- Effect of Diffusion of {100}Parallel to the ND Plane on the Charpy Impact Properties in Low Carbon Steels
- In-situ Observation of γ/α Phase Transformation in Low Carbon Steel by Laser Microscopy
- 高リン低炭素鋼のストリップ鋳片の特徴
- Continuously Cast 0.1 mass pct. C Steele with High Phosphorus: Microstructural Design and Control
- Continuously Cast 0.1 mass pct. C Steels with High Phosphorus : Microstructural Design and Control
- Continuously Cast 0.1 mass pct. C Steels with High Phosphorus: Microstructural Design and Control
- Bi-2211/Ag Superconducting Insert Magnet for High Magnetic Field Generation over 22 T
- Transport Properties of Bi-2212/Ag Superconducting Magnet with I_c over 500 A
- Preparation of Ag-I Intercalated Bi_2Sr_2CaCu_2O_y Superconductor
- Evolution of Columnar γ Grain in Low Carbon Steel and Its Refinement by Additional Elements in Thin Slab Casting Simulator
- Nucleation of Acicular Ferrite on Sulfide Inclusion during Rapid Solidification of Low Carbon Steel
- Interaction between Phosphorus Micro-Segregation and Sulfide Precipitation in Rapidly Solidified Steel-Utilization of Impurity Elements in Scrap Steel
- EBSD Characterization of the Twinning Microstructure in a High-Damping Mn-Cu Alloy
- The Twinning Microstructure and Damping Behavior in Mn-30Cu (at%) Alloy
- Novel processing recyclable and high performance steel bar
- Magnetic Field-Induced Martensitic Transformation of Fe-Co Particles in a Cu Matrix
- Crystalline Phases Formed in the Partially Melted States of Bi-Sr-Ca-Cu-O
- Crystallization Behavior and Partially Melted States in Bi-Sr-Ca-Cu-O
- The High-T_c Phase with a New Modulation Mode in the Bi, Pb-Sr-Ca-Cu-O System : Electrical Properties of Condensed Matter
- Complex Susceptibility of Bi, Pb-Sr-Ca-Cu-O Superconductors : Electrical Properties of Condensed Matter
- Crystal Phases of BiSrCaCu_2O_x Heat Treated in a Vacuum-Sealed System : Electrical Properties Condensed Matter
- High-T_c Phase Promoted and Stabilized in the Bi, Pb-Sr-Ca-Cu-O System : Electrical Properties of Condensed Matter
- Ba_2YCu_3O_x Crystal Formed by Peritectic Reaction
- Effects of Heat Treatment, Pre-Strain and Magnetic Field on the Formation of α' Martensite in Fe-25.5Ni-4Cr and 304L Steels
- MgB_2 Thin Films Fabricated by a Precursor and Post-annealing Method Have a High J_c in High Magnetic Fields
- Effects of Cu on Diffusional Transformation Behavior and Microstructure in Fe-Mn-Si-C Steels
- Fabrication and Superconducting Properties of Bi_2Sr_CaCu_2O_y Multilayer Tape Prepared by Continuous Heat Treatment
- Anisotropy in D.C. Magnetization in Textured Y_Ca_Ba_2Cu_4O_8 Superconductors
- Quantification of Isothermal Phase Transformation in Solid Metals Based on Measurement of Magnetic Susceptibility
- Prediction on Nominal Stress-Strain Curve of Anisotropic Polycrystal with Texture by FE Analysis
- Effects of High Magnetic Field and Tensile Stress on Martensitic Transformation Behavior and Microstructure at 4.2K in Fe-Ni-C Alloys
- Microstructure of Cast Strip in 0.1mass%C Steels Containing Phosphorus
- Strain Rate Dependence of Stress-Strain Curves in a Ti-Fe-O Alloy
- Effect of High Magnetic Field on Phase Transformation Temperature in Fe-C Alloys
- Fatigue Properties of Titanium Alloys in Liquid Helium
- Prediction of Nominal Stress-Strain Curves of a Multi-Layered Composite Material by FE Analysis
- Structural Elongation and Alignment in an Fe-0.4C Alloy by Isothermal Ferrite Transformation in High Magnetic Fields
- Effects of Magnetic Field and Prior Austenite Grain Size on the Structure Formed by Reverse Transformation from Lath Martensite to Austenite in an Fe-0.4C Alloy
- Effect of Co and Ni on Martensitic Transformation and Magnetic Properties in Fe-Pd Ferromagnetic Shape Memory Alloys
- PREFACE
- PREFACE
- Magnetic Properties of BiSrCaCu_2O_x Superconductors : Electrical Properties of Condensed Matter
- Quantitative Characterization of the Structural Alignment in Fe-0.4C Alloy Transformed in High Magnetic Field
- Effects of a High Magnetic Field on Transformation Temperatures in Fe-based Alloys
- Rotational Hysteresis of the Alloys of SmCo_5-SmCu_5 System
- Effects of a High Magnetic Field on Bainitic and Martensitic Transformations in Steels
- Temperature Dependence of the Rotational Hysteresis of the Alloys of SmCo_5-SmCu_5 System