Rotting Prevention by CaO in RDF Production
スポンサーリンク
概要
- 論文の詳細を見る
The rotting of municipal solid waste is one hazard in the RDF production process. In this study, the effect of CaO addition on rotting prevention is experimentally examined.A mixture of soybean protein and distilled water was used as the model refuse. Escherichia coli was adopted as a rotting indicator. CaO powder was uniformly added to the model refuse, and the changes of pH and cell number were measured.The rotting was prevented by CaO addition because CaO addition made the alkalinity in the sample higher. The effect of CaO addition on rotting prevention depends on moisture content.
- 社団法人 化学工学会の論文
著者
-
NAKAMURA Masaaki
Department of Biomaterials, Osaka Dental University
-
Bando Y
Department Of Chemical Engineering Nagoya University
-
Bando Yoshiyuki
Department Of Applied Chemistry Gifu University
-
YASUDA Keiji
Department of Chemical Engineering, Nagoya University
-
Bando Y
Nagoya Univ. Nagoya Jpn
-
Tatemoto Yuji
Department Of Materials Science And Chemical Engineering Shizuoka University
-
AZEGAMI Muneo
Prand Research Institute
-
Yasuda Keiji
Department Of Chemical Engineering Graduate School Of Engineering Nagoya University
-
Nakamura Masaaki
Department Of Biomaterials Osaka Dental University
-
Nakamura Masaaki
Department Of Applied Physics Faculty Of Science Tokyo University Of Science
関連論文
- Preparation of injectable 3D-formed β-tricalcium phosphate bead/alginate composite for bone tissue engineering
- Allergic Contact Dermatitis in the Dental Clinics
- Severe congestive heart failure with cardiac liver cirrhosis 10 years after orthotopic liver transplantation for familial amyloidotic polyneuropathy
- Inhibitory Effect of α-Tocopherol on Methylmercury-Induced Oxidative Steress
- Clinical Investigation of the Lesions Responsible for Sensory Disturbance in Minamata Disease
- Synthesis and Characterization of a New μ-Alkoxodiiron(III) Complex with NO_5 Donor Set Environments
- Genetic mutations in exons 3 and 4 of the pancreatic secretory trypsin inhibitor in patients with pancreatitis
- Evaluation of in Vitro Embryotoxicity of Dental Monomers by Differentiation of Embryonic Stem Cells into Contracting Cardiac Myocytes
- Evaluation of in Vitro Embryotoxicity of Dental Monomers by Differentiation of Embryonic Stem Cells into Contracting Cardiac Myocytes
- Flow Characteristics in Cocurrent Upflow Bubble Column Dispersed with Micro-Bubbles
- Effect of Flow Mode of Carrier Gas on Performance of Ultrasonic Atomization
- Hydrogen Fermentation by Using Heat-Shocked Granular Sludge
- Effects of Operation Conditions on the Performance of a Concentrator Using Ultrasonic Atomization
- Effect of Ultrasonic Irradiation on Solvent Cleaning for Parts Impregnated with Chlorinated Organic Compounds
- Development of Small Ultrasonic Reactor for On-Site Treatment of Wastewater Including Chlorinated Hydrocarbon
- Enhancement in Biodegradability of Excess Sludge by Using a Centrifugal Vibration Mill
- The Effects of the Solute Properties in Aqueous Solutions on the Separation Characteristics in Ultrasonic Atomization
- The Effect of Operational Condition on the Contribution of Evaporation in Ultrasonic Atomization
- Novel orthotopic implantation model of human malignant pleural mesothelioma (EHMES-10 cells) highly expressing vascular endothelial growth factor and its receptor
- K_ Channel Knockout Mice Crossbred with Transgenic Mice Expressing a Dominant-negative Form of Human Insulin Receptor Have Glucose Intolerance but not Diabetes
- The Effects of Dental Monomers on Total Nitrate/Nitrite Production in HEp-2 Cells
- Effects of Six Participate Metals on Osteoblast-like MG-63 and HOS Cells in vitro
- Determining the Size of Colloidal Particles Using Ultrasonic Absorption Measurements
- Dynamics of V_2O_5 Sol by Measurement of Ultrasonically Induced Birefringence
- Phase Diagram of the Spin-1/2 Bond-Alternating Two-Leg Ladder (Condensed Matter: Electronic Structure, Electrical, Magnetic and Optical Properties)
- Phase Diagram of the Spin-1/2 Bond-Alternating Two-Leg Ladder
- FLOW CHARACTERISTICS OF BUBBLE COLUMN WITH PERFORATED DRAFT TUBE IN VISCOUS LIQUID
- FLOW CHARACTERISTICS OF BUBBLE COLUMN WITH PERFORATED DRAFT TUBE-EFFECTS OF EQUIPMENT DIMENSIONS AND GAS DISPERSION-
- Simulation of Gas and Particle Behaviors in Moving-Fluidized Bed with Inclined Baffle Plates by Two-Fluid Model
- Flow Properties of Moving-Fluidized Bed with Inclined Baffle Plates
- COLLECTION CHARACTERISTICS OF A SOLAR AIR HEATER WITH BUILT-IN NET
- STUDY ON HEAT TRANSFER ENHANCEMENT BY USING SPIRALLY CORRUGATED TUBES
- The Effects of Particulate Metals on Cell Viability of Osteoblast-like Cells in vitro
- Ultrasonic Decomposition of a Mixture of Phenol and ρ-Chlorophenol in Aqueous Solution
- Cytocompatibility of osteoblast-like cells to fiber-sintered porous titanium
- Effects of Metal Combinations on Cytotoxicity Evaluation Using a Dynamic Extraction Method
- Estrogenic Activity of Dental Materials and Bisphenol-A Related Chemicals in vitro
- Semi-continuous Magnetic Removal of Phosphate Using an Iron Oxide Hydroxide Adsorbent and Regeneration of Its Adsorbent
- Evidence that HSP70 Gene Expression May be Useful for Assessing the Cytocompatibility of Dental Biomaterials
- The Effect of a Reflection Plate on the Decomposition Performance of a Sonoreactor
- Liquid Circulation Flow in a Rectangular Airlift Bubble Column
- Development of Rectangular Airlift Bubble Column Installed with Support Material for Enhancement of Nitrogen Removal(ENVIRONMENTAL BIOTECHNOLOGY)
- Development of a Bubble Column with a Gas-Liquid Simultaneous Injection Nozzle and a Downcomer for the Ozone Oxidation Method
- Development of a Rectangular Airlift Sonoreactor Combined with Sparging Ozone
- Dissolved Oxygen Distribution in a Rectangular Airlift Bubble Column for Biological Nitrogen Removal
- Enhancement of Nitrogen Removal in a Rectangular Airlift Bubble Column Having Aerobic and Anaerobic Regions by Adding an Immobilizing Carrier
- Effect of Packed Structure on the Liquid Flow Behavior in the Packed Bed Biofilter
- Effects of Particle Properties on Decomposition Performance in Ultrasonic Airlift Reactor
- Effect of Liquid Height on Flow Characteristics in Bubble Column Using Highly Viscous Liquid
- Reduction of Channeling Liquid Flow in Trickle Bed Using Non-Uniformly Packed Structure
- Effects of Packed Structure and Liquid Physical Properties on Liquid Flow Behaviors in Trickle Bed with Non-uniformly Packed Structure
- Effect of Orientation of Packing Structure on Liquid Flow Distribution in Trickle Bed
- Effects of Equipment Dimensions on Circulation Flow Rates of Luquid and Gas in Bubble Column with Draft Tube
- Effect of Liquid Height on Sonochemical Reaction in a Large-Scale Reactor of a Rectangular Parallelepiped Using Low Frequency Ultrasound
- Decomposition of p-Chlorophenol in Aqueous Solution by Combination of Ultrasound and Ultraviolet Light
- Effects of Test Periodontal Dressing Materials on Tubulous Structure Formation In Vitro
- In vitro embryotoxicity testing of metals for dental use by differentiation of embryonic stem cell test
- Effects on ES-D3 Cell Differentiation of Three-dimensional Cell Culture System using with Collagen Gel Derived from Chum Salmon Sources
- Syntheses and Magnetic Properties of Cyclic Tetranuclear and Infinite Linear-chain Copper(II)-Manganese(II) Complexes
- Infinite Chain Structure and Steep Spin Crossover of a Fe^ Complex with a N_3O_2 Pentadentate Schiff-Base Ligand and 4-Aminopyridine
- Effect of Titanium Surface Roughness on the Cytocompatibility of Osteoblast-like Cells
- Field Tests on Silica Removal from Geothermal Brines in Sumikawa and Onuma Geothermal Areas
- The Pyrolysis Characteristics of Each Component in Municipal Solid Waste and Thermal Degradation of Its Gases
- Effects of Equipment Dimension on Liquid Mixing Time of Bubble Column with Draft Tube
- Separation of Solid Particles by Density Difference in a Liquid-Solid Fluidized Bed
- Synthesis, Structure, and Properties of Di-μ-phenoxo-bridged Dinuclear Cu^Ni^ and Cu^Co^ Complexes and Cyclic Di-μ-phenoxo-μ-amido-bridged Tetranuclear Cu_2^Zn_2^ and Cu_4^ Complexes Derived from the 1,2-Bis(2-oxidobenzamidato)
- Superconductivity in the Vicinity of Charge Ordered State in Organic Conductor β-(meso-DMBEDT-TTF)_2 PF_6(Condensed matter: electronic structure and electrical, magnetic, and optical properties)
- Dinaionic Ligand Complexes, K_2[CuL^n] and K_2[NiL^n] (n = 1, 2; H_4L^1=1, 2-Bis(2-hydroxybenzamido)ethane, H_4L^2=1, 2-Bis(2-hydroxybenzamido)benzene), and Their Dinuclear Cu(II)-Cu(II) and Ni(II)-Cu(II) Complexes
- Minimum Bubbling Velocity and Homogeneous Fluidization Region under Reduced Pressure for Group-A Powders
- Drying Characteristics of Porous Material in a Fluidized Bed of Fluidizing Particles with Superheated Steam
- Effect of Motion of Drying Materials in Fluidized Bed on Drying Characteristics
- In vitro embryotoxicity testing of polymeric substances for dental use by differentiation of embryonic stem cells
- Flow and Heat Transfer Characteristics in Liquid-Solid Swirl Fluidized Bed Using Centrifugal Force
- Liquid Flow Rate Distribution in Trickle Bed with Non-Uniformly Packed Structure
- Wastewater Treatment by Anaerobic-Aerobic Activated Sludge Method in Bubble Column with Draft Tube
- Effect of CaO Addition on Rotted Material
- Effect of Liquid Mixing on Performance of Porphyrin Decomposition by Ultrasonic Irradiation
- Rotting Prevention by CaO in RDF Production
- Effect of Aluminum Ion on Silica Removal from Geothermal Brine by Seeding Method Using Silica Gel
- Removal of Silica from Geothermal Brine by Seeding Method Using Silica Gel
- CRYSTALLIZATION FOULING OF CALCIUM SULFATE DIHYDRATE ON HEAT-TRANSFER SURFACES
- Formation of gradient composites using the infiltration mechanism of chloride reduced particles
- Drying Characteristics of Porous Materials in Superheated Steam Fluidized Bed under Reduced Pressure
- Drying Characteristics of Porous Materials in a Fluidized Bed of Hygroscopic Porous Particles
- Bubbling Characteristics under Vertical Vibration in a Two-Dimensional Fluidized Bed
- The Mechanism of a Temperature Decrement of Porous Materials Immersed in a Fluidized Bed in Drying
- Characteristics of vibro-fluidization for fine powder under reduced pressure
- Prediction of Agglomerate Size for Fine Particles in a Vibro-fluidized Bed
- Comparison of three vibrational modes (twist, vertical and horizontal) for fluidization of fine particles
- Genotoxicity of metals for dental use by chromosome aberration tests
- Reversible Formation of nanoparticles by Thermoresponsive Dehydroalanine Polymer : Poly(N-isobutyryldehydroalanine methyl ester)
- Cytocompatibility of a Tissue Conditioner Containing Vinyl Ester as a Plasticizer
- Cytocompatibility and Viscoelastic Properties of Phthalate Ester-free Tissue Conditioners
- EFFECTS OF OPERATIONAL CONDITIONS ON DRYING CHARACTERISTICS IN SUPERHEATED STEAM FLUIDIZED BED DRYING
- Collection characteristics of composite solar collector with volume heat trap and surface heat trap.
- Gas-liquid contactor using gas entrainment by liquid flowing downward into downcomer.
- Cocurrent downflow bubble column with simultaneous gas-liquid injection nozzle.
- P-21 Effect of Ultrasonic Irradiation Condition on Enzymatic Hydrolysis of Woods(Poster Presentations)
- Effects of Packed Structure and Liquid Properties on Liquid Flow Behavior in Lower Part of Blast Furnace
- Flow characteristics of three-phase fluidized bed with draft tube. Effect of outer column diameter and determination of gas-liquid interfacial area.