Characteristics of Flow Behavior in Semi-Cylindrical Spouted Bed with Draft Tube
スポンサーリンク
概要
- 論文の詳細を見る
A cold model experiment using semi-cylindrical spouted bed with a draft tube was carried out to improve the performance of a spouted bed-type coal gasifier. The effects of the gas flow rate, tube-cone clearance, included angle of conical base, particle diameter and bed weight on the solids flow behavior in the unit are investigated. The gas velocity in the draft tube depended on the gas feed rate. The gas velocity in the annulus increases with increasing in the tube-cone clearance, included angle of conical base and the mean particle diameter but decreased with increasing the bed weight. The particles circulation rate increases with increasing in the tube-cone clearance, the mean particle diameter and the bed weight. Tendencies of the change of particle circulation rate with gas feed rate for 5π/18 and 6π/18 of included angle are different from those for 7π/18 and π of included angle in the region of high gas feed rate. Correlations to describe the annulus gas velocity and particle circulation rates are obtained.
- 社団法人 化学工学会の論文
著者
-
UEMURA Yoshimitsu
Department of Applied Chemistry and Chemical Engineering
-
HATATE Yasuo
Department of Applied Chemistry and Chemical Engineering
-
IJICHI Kazuya
Department of Applied Chemistry and Chemical Engineering, Kagoshima University
-
MIYAUCHI Masahiko
Department of Applied Chemistry and Chemical Engineering, Faculty of Engineering, Kagoshima Universi
-
Ijichi K
Department Of Applied Chemistry And Chemical Engineering Kagoshima University
-
Hatate Y
Department Of Applied Chemistry And Chemical Engineering Kagoshima University
-
Ijichi Kazuya
Department Of Applied Chemistry And Chemical Engineering Kagoshima University
-
Maruta M
Department Of Applied Chemistry And Chemical Engineering Faculty Of Engineering Kagoshima University
関連論文
- Electroselective Permeability Control of Microcapsule Immobilized Ferroelectric Liquid Crystals in an External Electrical Field
- Lactic Acid Bacteria-Enclosing Poly (ε-Caprolactone) Microcapsules as Soil Bioamendment(ENVIRONMENTAL BIOTECHNOLOGY)
- Preparation and Release Characteristics of Biodegradable Microcapsules Encapsulating Activated Carbon Impregnated with Pesticide Using the Solvent Evaporation Method
- Entrapment Efficiency of Inorganic Salts into Biodegradable Microcapsules Prepared by the Solvent Evaporation Method
- リノレン酸メチルの自動酸化中におけるトリプシン阻害および促進物質の同時発現--トリプシン阻害物質の確認
- Electro-Sensitive Microcapsule Immobilized Ferroelectric Liquid Crystal
- Improvement of Fluidized State of Geldart's A-Type Particles with Smooth Surface by Ultra-Fine Powder Addition
- Catalytic decomposition of hydrocarbon into hydrogen and carbon in a spouted-bed reactor as the second-stage reactor of a plastic recycling process
- Formation of Carbon and Hydrogen from Lower Hydrocarbons in a Packed Bed of Nickel-plated Alumina Balls
- Flash-Pyrolyzed Product Distribution of Major Plastics in a Batch Reactor
- Characteristics of Flow Behavior in Semi-Cylindrical Spouted Bed with Draft Tube
- Application of High-Velocity Fluidized Bed Reactor for Producing Hollow Inorganic Microspheres from Volcanic Glass Particles
- VAPOL-LIQUID EQUILIBRIA OF MINUTE AMOUNTS OF N-METHYLSSUCCINIMIDE AND WATER IN N-METHYL-2-PYRROLIDONE
- Preparation of Cross-Linked Microcapsules Entrapping Inorganic Salt by In-situ Polymerization in (W/O/W) Emulsion System
- EFFECTS OF CULTURE CONDITIONS ON GROWTH AND PROTEASE PRODUCTION OF BACILLUS STEAROTHERMOPHILUS YG185
- Production of Ethanol from Distilled Shochu Mash through Saccharification by a Cellulase and Fermentation by a Saccharomyces cerevisiae : study for Basic Experimental Conditions of Saccharification
- Association Behavior of Singly Chain-End Hydrophobically-Modified Poly(vinyl alcohol) in Aqueous Solution
- Characteristics of Biodegradable Microcapsules by Solvent Evaporation in (W/O/W) Emulsion System
- PREPARATION OF GPC PACKED POLYMER BEADS BY A SPG MEMBRANE EMULSIFIER
- NOVEL PROCEDURE FOR MONODISPERSED POLYMERIC MICROSPHERES WITH HIGH ELECTRIFYING ADDITIVE CONTENT BY PARTICLE-SHRINKING METHOD VIA SPG MEMBRANE EMULSIFICATION
- PERMEABILITY CONTROL OF ACTIVE AGENT FROM POLYMERIC MICROCAPSULES BY COATING OF GELATIN/GUM ARABIC MEMBRANE
- PREPARATION OF DIVINYLBENZENE HOMOPOLYMERIC MICROCAPSULES WITH HIGHLY POROUS MEMBRANES BY IN SITU POLYMERIZATION WITH SOLVENT EVAPORATION
- pH-SENSITIVE RELEASE FROM POLY(ACRYLAMIDE-CO-N, N'-METHYLENE BISACRYLAMIDE)MICROSPHERES
- Mono-core Coating of Fine Particles with Finer Particles by Means of a Draft-Tube Spouted-Bed with Medium Particles
- Supramolecular Polymers from a Cyclodextrin Dimer and Ditopic Guest Molecules
- Complex Formation and Gelation between Copolymers Containing Pendant Azobenzene Groups and Cyclodextrin Polymers
- ELECTROSTATIC PROPERTIES OF POLY (STYRENE-CO-DIVINYLBENZENE) MICROSPHERES WITH DIFFERENT SURFACE MORPHOLOGIES
- ELECTROSTATIC CHARACTERIZATION OF POLYMERIC MICROSPHERES CONTAINING ELECTRIFYING ADDITIVES
- CONTROLLED RELEASE OF STYRENE-DIVINYLBENZENE COPOLYMER MICROCAPSULES BY PHASE TRANSFORMATION OF ENCAPSULATED STEARIC ACID
- REGENERATION OF STYRENE-DIVINYLBENZENE COPOLYMER MICROCAPSULES CONTAINING TRI-N-OCTYL AMINE
- PREPARATUON AND EXTRACTION PROPERTIES OF MICROCAPSULES CONTAINING TRI-N-OCTYL AS CORE MATERIAL AMINE
- Coating of Particles with Finer Particles Using a Draft-Tube Spouted-Bed
- A Helical Supramolecular Polymer Formed by Host-Guest Interactions
- Multi-layered Gelatin/Acacia Microcapsules by Complex Coacervation Method.
- Lactic Acid Bacteria-Enclosing Poly(ε-Caprolactone) Microcapsules as Soil Bioamendment
- Gas holdup and pressure drop in three-phase horizontal flows of gas-liquid-fine solid particles system.
- Behavior of bubbles in a semi-cylindrical gas-solid fluidized bed.
- Heat transfer coefficient in three-phase vertical downflows of gas-liquid-fine solid particles system.
- Behavior of bubbles in a cylindrical fluidized bed at an elevated temperature.
- Effect of bed temperature on bubble size and bubble rising velocity in a semi-cylindrical slugging fluidized bed.
- Vapor-Liquid Equilibria of a Minute Amount of Furfural in Water-Ethanol-1-Propanol System.
- Suspension polymerization of styrene under ultrasonic irradiation.
- A simulation of continuous suspension polymerization of styrene by the Monte Carlo method.
- Styrene slurry polymerization within suspended droplets in a continuous stirred tank reactor.
- Change of size distribution of polymer droplets during the slurry polymerization of styrene within isooctane droplets suspended in water.
- Formation of nickel concentration profile in nickel/alumina catalyst during post-impregnation drying.
- The rate of styrene and acrylonitrile copolymerization involving a minute amounts of either monomer.
- Kinetics of styrene slurry polymerization in suspended isooctane droplets.
- Effect of nickel concentration profile on selectivity of acetylene hydrogenation.
- Effects of nickel source material on characteristics of nickel/alumina impregnated catalysts.
- Effects of post-impregnation drying conditions on physical properties and overall reaction rate of nickel/alumina catalysts.
- Estimation of bubble-to-liquid mass transfer rate coefficient by transient response technique and by steady state reaction studies.
- Characterization of supported nickel catalysts prepared by deposition of nickel chloride vapor on alumina.