Stresses and Temperature Stability of Dense Wavelength Division Multiplexing Filters Prepared by Reactive Ion-Assisted E-Gun Evaporation
スポンサーリンク
概要
- 論文の詳細を見る
In this paper, we report the in situ measurement of the temperature stability of narrow-band-pass filters on different types of substrate, for dense wavelength division multiplexing (DWDM) filters in optical-fiber transmission systems. The DWDM filters were designed as all-dielectric Fabry–Perot filters and fabricated by reactive ion-assisted deposition. Ta2O5 and SiO2 were used as high- and low-refractive-index layers, respectively, for constructing the DWDM filters. The accuracy and stability of the coating process were evaluated for fabricating the DWDM filters for the temperature stability of the center wavelength. The center wavelength shift was determined to be greatly dependent on the coefficient of thermal expansion of the substrate on which the filter is deposited.
- Published by the Japan Society of Applied Physics through the Institute of Pure and Applied Physicsの論文
- 2005-10-15
著者
-
Shieh Han-ping
Department Of Photonics And Display Institute National Chiao Tung University
-
Wei Chao-Tsang
Department of Photonics and Institute of Electro-Optical Engineering, National Chiao-Tung University, Hsinchu, Taiwan 300, R.O.C.
-
Shieh Han-Ping
Department of Photonics and Institute of Electro-Optical Engineering, National Chiao-Tung University, Hsinchu, Taiwan 300, R.O.C.
-
Shieh Han-Ping
Department of Photonics & Institute of Electro-Optical Engineering, National Chiao-Tung University, 1001, Ta-Hsueh Rd., Hsinchu 30010, Taiwan, R.O.C.
関連論文
- Power Efficiency Improvement of White Phosphorescent Organic Light-Emitting Diode with Thin Double-Emitting Layers and Hole-Trapping Mechanism
- Rib-free Ink-Jet Printing Fabrication on Heterogeneous Surfaces
- Efficient Polarized Backlight for Transflective Liquid Crystal Display Illumination
- Emiflective Display with Integration of Reflective Liquid Crystal Display and Organic Light Emitting Diode
- Increased Organic Light-Emitting Diode Panel Light Efficiency by Optimizing Structure and Improving Alignment of Pyramidal Array Light-Enhancing Layers
- Ultrathin Reflective Flexible Liquid Crystal Display Film
- Volumetric Scattering Layer for Flexible Transflective Display
- Effects of Processing Variables on Tantalum Nitride by Reactive-Ion-Assisted Magnetron Sputtering Deposition
- Study of Effect of Seam on Wire-Grid Polarizer Efficiency Using Rigorous Coupled-Wave Analysis
- Superresolution Structure Optical Disk with Semiconductor-Doped Glass Mask Layer Containing CdSe Nanoparticles
- Stresses and Temperature Stability of Dense Wavelength Division Multiplexing Filters Prepared by Reactive Ion-Assisted E-Gun Evaporation
- Optical and Mechanical Property Changes in Thin-Film Filters with Post Deposition Thermal Treatments
- Plastic Planar-Integrated Free-Space Optical Interconnector
- Double-Corrugated C-Shaped Aperture for Near-Field Recording
- Modeling Multizoned Layer to Improve Light Efficiency of Organic Light-Emitting Diode Display
- Microcell Liquid Crystal Film for High-Contrast Flexible Display Applications
- Oxygen Plasma Functioning of Charge Carrier Density in Zinc Oxide Thin-Film Transistors
- Emi-Flective Display Device with Attribute of High Glare-Free-Ambient-Contrast-Ratio