摩擦現象を利用したアルミニウムフォームの表面改質
スポンサーリンク
概要
- 論文の詳細を見る
The surface region of the aluminum foams (trade name ALPORAS) was modified through the friction stir processing (FSP) which was performed by using friction phenomena with a high-speed rotating tool. The tool was rotated at speeds ranging from 820 to 2400 rpm, and plunged from the top surface of the aluminum foam, and then traversed at speeds ranging from 50 to 300 mm/min. The surface-modified zone (SMZ) had considerably smoother surface in comparison to the unprocessed zone (UZ). Especially for 1390 rpm and 150 mm/min, the smoothest surface was obtained, which was attributed to the smaller amount of pores in the SMZ. In addition, a very dense layer was formed near the surface of the SMZ through the localized collapse and densification of the cell structure near the surface region, which was attributed to the friction phenomena with the high-speed rotating tool. The mechanical properties of the aluminum foams were significantly improved through the FSP. Especially for 1390 rpm and 150 mm/min, the SMZ exhibited the highest average maximum indentation strength and energy absorption ability, which were equivalent to about 2.2 times the values of the UZ. The tool rotation speed and the tool traverse speed were very important parameters not only in controlling the surface morphology, but also in improving the mechanical properties of the aluminum foams. The FSP was a very effective technology for the remarkable improvement in the mechanical properties through the cell structure control of the surface region of the aluminum foams, without any dense skin materials.
- The Japan Institute of Metals and Materialsの論文
著者
関連論文
- アルミニウム合金とマグネシウム合金とのテーラードブランク作製のための異種摩擦撹拌接合
- 難燃性マグネシウム合金製ルーフボックスの試作
- 異周速圧延したAZ31Bマグネシウム合金の特性と圧延条件との関係
- マグネシウム合金とアルミニウム合金間の異種摩擦攪拌接合
- 212 マグネシウム合金異厚材の摩擦攪拌接合(FSW (III),平成18年度春季全国大会)
- マグネシウム合金異厚材の摩擦攪拌接合
- 異周速圧延したAZ31Bマグネシウム合金の引張特性と成形性
- 切削チップから再生した6061アルミニウム合金の性質に及ぼすチップ性状と押出条件の影響
- アルミニウム合金切削チップの押出材に対する圧延処理の効果
- 低弾性率軽量金属複合材料の材料特性
- 6061アルミニウム合金切削チップの固相リサイクル
- 低ヤング率カーボンメタル複合材料の開発
- 6061合金切削チップを用いた熱間押出材の機械的特性と腐食特性
- アルミニウム合金切削チップの熱間押出によるリサイクル材の作製とその特性
- アルミニウム合金切削チップ熱間押出し材の摩擦撹拌接合
- マグネシウム合金とアルミニウム合金間の異種摩擦攪拌接合
- 260 摩擦攪拌接合に普遍性を与える本質的な接合因子の選定(摩擦撹拌接合(IV))
- 摩擦現象を利用した発泡金属コアサンドイッチパネルの新しい作製技術の開発
- 摩擦現象を利用したアルミニウムフォームの表面改質
- 摩擦攪拌プロセス : 金属材料の新しい組織制御技術
- マグネシウム合金異厚材の摩擦攪拌接合
- 摩擦撹拌プロセスを利用したアルミニウム合金の組織制御
- 摩擦撹拌プロセスを利用したアルミニウム合金の結晶粒微細化および機械的特性の改善
- クローズアップ 難燃性マグネシウム合金の摩擦攪拌接合
- FSWの品質保証に関する研究FSW接合金属の流動現象に及ぼすツール先端温度の影響
- FSWの品質保証に関する研究 : 接合不良部形成メカニズムについて
- FSWの品質保証に関する研究 : 非破壊検査に基づくFSWの疲労寿命予測
- FSWの品質保証に関する研究非破壊検査による接合不良部位の定量的把握
- 摩擦撹拌プロセスを利用した超微細結晶粒アルミニウム合金の作製
- 213 PEG処理木材の熱特性(化学加工技術,木材の利用促進に向けた技術開発,オーガナイスドセッション4)
- 222 木質材料の流動成形に関する研究 : 素材の変形挙動に及ぼすバインダの影響(物理加工技術,木材の利用促進に向けた技術開発,オーガナイスドセッション4)
- AZ91マグネシウム合金連続鋳造棒と押出棒のすえ込み特性
- 非破壊検査による摩擦攪拌接合継手の接合欠陥検出と疲労寿命予測
- FSWの品質保証に関する研究:非破壊検査に基づくFSWの疲労寿命予測
- FSWの品質保証に関する研究:非破壊検査による接合不良部位の定量的把握
- FSWの品質保証に関する研究:FSW接合金属の流動現象に及ぼすツール先端温度の影響
- FSWの品質保証に関する研究:接合不良部形成メカニズムについて
- 摩擦現象を利用したアルミニウムフォームの表面改質
- 摩擦攪拌プロセス―金属材料の新しい組織制御技術