Growth Mechanism of Polypyrrole through Electrochemical Polymerization
スポンサーリンク
概要
- 論文の詳細を見る
It is important to reveal the growth mechanism of the conductive polymer upon electrochemical polymerization in order to control the morphology of the film as a shape of the conductive polymer. In this paper, the relation between the structure of the polypyrrole as the conductive polymer and the quantity of electricity during galvanostatic polymerization was studied with the microscopic observation. With the quantity of electricity in the current density of 0.75 to 7.5 A·m−2, a particle of polypyrrole grew up to 15 µm in size at maximum while the thickness of the polypyrrole film was increased accompanying a stagnant behaviour around 25 µm to some extent, indicating increase in packing density of the polypyrrole particles.
- 公益社団法人 電気化学会の論文
著者
-
Kawakita Jin
National Inst. Materials Sci.
-
Kawakita Jin
National Institute For Materials Science
-
Kuroda Seiji
National Inst. Materials Sci.
-
SAKAMOTO Yukihiro
Chiba Institute of Technology
-
NOZAKI Akihide
National Institute for Materials Science
関連論文
- Comparison of microstructures of warm sprayed and cold sprayed titanium coatings and powder particles
- Coating Fabrication of Nano-Sized Oxides/Metal Composite by Warm Spray and its Photo-Cathodic Protection Behaviour
- Fabrication and Mechanical Properties of Composite Structure by Warm Spraying of Zr-Base Metallic Glass
- OS0805 残留応力の耐熱コーティング材の非線形挙動に及ぼす影響(ガスタービン材料の各種力学特性,オーガナイズドセッション)
- Effect of Hf Addition on Oxidation Properties of Pt-Ir Modified Aluminide Coating
- Role of Iridium in Hot Corrosion Resistance of Pt-Ir Modified Aluminide Coatings with Na_2SO_4-NaCl Salt at 1173K
- リチウム挿入ホストとしてのLi1+xV3O8
- Temperature Dependence of Lithium Insertion Behaviour of Li_V_3O_8
- Multi-scale Phenomena and Structures Observed in Fabrication of Thermal Barrier Coatings by Using Plasma Spraying
- Measurement of Temperature and Velocity of Thermally Sprayed Particles using Thermal Radiation
- Effect of Feedstock Particles' Strength on the Structure and Some Mechanical Properties of Warm-Sprayed WC-Co Coatings
- Simulation of Solid Particle Impact Behavior for Spray Processes
- Crack Monitoring during Plasma Spraying of Ceramic Coatings by Non-Contact Acoustic Emission Method
- Importance of the Adhesion of HVOF Sprayed Coatings for Aqueous Corrosion Resistance
- Steam Oxidation Studies on 50Ni-50Cr HVOF Coatings on 9Cr-1Mo Steel : Change in Structure and Morphology across the Coating/Substrate Interface
- Characterization of Electroplated Platinum-Iridium Alloys on the Nickel-Base Single Crystal Superalloy
- Observation of High Resolution Microstructures in Thermal Sprayed Coatings and Single Deposited Splats Using Ion Beam Milling
- Effects of Silicon and Boron on Oxidation Behavior of Air Plasma Sprayed Fe-based alloy Coatings
- In-Situ Densification of Ti Coatings by the Warm Spray (Two-Stage HVOF) Process
- Corrosion Resistance of HastelloyC Coatings Formed by an Improved HVOF Thermal Spraying Process
- Microstructure and Corrosion Resistance of HVOF Sprayed 316L Stainless Steel and Hastelloy C Coatings
- Comparison of Microstructure and Oxidation Behavior of CoNiCrAlY Bond Coatings Prepared by Different Thermal Spray Processes
- Effect of Spray Condition and Heat Treatment on the Structure and Adhesive Wear Properties of WC Cermet Coatings
- Oxidation Restriction of In-flight Particles upon GS-HVOF Spraying by Nitrogen Addition to Combustion Gas
- Thermal Cycling Behavior of Plasma Sprayed Segmented Thermal Barrier Coatings
- Effects of Heat Treatment on Microstructures and Physical Properties of Segmented Thermal Barrier Coatings
- Microstructural Investigation of CoNiCrAlY Coated Ni-Based Single Crystal Superalloy Prepared by LPPS
- Torsion and Tensile Properties of Thin Wires of Nickel-Free Stainless Steel with Nitrogen Absorption Treatment
- Mechanical Properties of Thin Wires of Nickel-Free Austenintic Stainless Steel with Nitrogen Absorption Treatment
- Mechanical Properties and Microstructures of a Thin Plate of Nickel-Free Stainless Steel with Nitrogen Absorption Treatment
- New Manufacturing Process of Nickel-Free Austenitic Stainless Steel with Nitrogen Absorption Treatment
- Effects of Corona Discharge on the Formation of Electrically-Extracted Liquid Jets
- Effect of Surface Treatment and Crystal Orientation on Microstructural Changes in Aluminized Ni-Based Single-Crystal Superalloy
- Detection of AE Events due to Cracks in TBC during Spraying Process
- Growth Mechanism of Polypyrrole through Electrochemical Polymerization