Coating Fabrication of Nano-Sized Oxides/Metal Composite by Warm Spray and its Photo-Cathodic Protection Behaviour
スポンサーリンク
概要
- 論文の詳細を見る
By putting photo-electric conversion materials and electron storage materials together on one device, full-time cathodic protection system was expected to function and its coating technique is required to realize the system. So far, Warm Spray, impact deposition of supersonic particle with temperature controllable in a wide range, enabled nano-sized TiO2 and Fe2O3 to be deposited controlling thermal degradation of the particles and it was revealed that each of photo-electric conversion and electron storage were functioned. The rest potential of the coatings as an indicator of overall system performance was not negative sufficiently, which might be related to the less conductive nature. Therefore, metallic Zn was introduced in this paper for shifting the rest potential to more negative direction and increase of the conductivity. The coatings were successfully fabrication with control of thermal degradation of Zn, which worked as a binder to connect the oxide particles. Photo-cathodic protection behaviour indicated that the steady rest potential of the Warm Sprayed coatings of the TiO2-Fe2O3 system was not influenced on the introduction of metallic Zn, implying that it might not be limited by the conductive property of the coatings.
著者
-
Kawakita Jin
National Inst. Materials Sci.
-
Kuroda Seiji
National Inst. Materials Sci.
-
Shinohara Tadashi
National Institute for Materials Science
-
Sodeoka Satoshi
National Institute Of Advanced Industrial Science And Technology Kansai Center
-
SAKAMOTO Yukihiro
Mechanical Science and engineering, Chiba Institute of Technology
-
ONIZAWA Koichiro
Mechanical Science and engineering, Chiba Institute of Technology
-
SUZUKI Masato
National Institute of Advanced Industrial Science and Technology
関連論文
- Comparison of microstructures of warm sprayed and cold sprayed titanium coatings and powder particles
- Coating Fabrication of Nano-Sized Oxides/Metal Composite by Warm Spray and its Photo-Cathodic Protection Behaviour
- Fabrication and Mechanical Properties of Composite Structure by Warm Spraying of Zr-Base Metallic Glass
- OS0805 残留応力の耐熱コーティング材の非線形挙動に及ぼす影響(ガスタービン材料の各種力学特性,オーガナイズドセッション)
- Chemical State and Refractive Index of Mg-Ion-Implanted Silica Glass
- Effect of Hf Addition on Oxidation Properties of Pt-Ir Modified Aluminide Coating
- Role of Iridium in Hot Corrosion Resistance of Pt-Ir Modified Aluminide Coatings with Na_2SO_4-NaCl Salt at 1173K
- リチウム挿入ホストとしてのLi1+xV3O8
- Temperature Dependence of Lithium Insertion Behaviour of Li_V_3O_8
- Multi-scale Phenomena and Structures Observed in Fabrication of Thermal Barrier Coatings by Using Plasma Spraying
- Measurement of Temperature and Velocity of Thermally Sprayed Particles using Thermal Radiation
- W18I Evaluation of corrosivity in atmospheric environment by ACM (Atmospheric Corrosion Monitor) type corrosion sensor(International Workshop on "New Frontiers of Smart Materials and Structural Systems")
- Photoeffect of Corrosion Behavior of SrTiO_3-Coated Galvanized Steel
- Sol-Gel Derived Ti-Fe Oxide Coating for Photoelectrochemical Cathodic Protection of Carbon Steel
- Effects of Interfacial Iron Oxides on Corrosion Protection of Carbon Steel by TiO_2 Coating under Illumination
- Applicability of the Competition Concept in Determining the Stress Corrosion Cracking Behavior of Austenitic Stainless Steels in Chloride Solutions
- Alloying Effects on Dissolution Rate of Crevice Corrosion for Austenitic Stainless Steels in 3%NaCl Solution at 80℃
- Effect of Feedstock Particles' Strength on the Structure and Some Mechanical Properties of Warm-Sprayed WC-Co Coatings
- Simulation of Solid Particle Impact Behavior for Spray Processes
- Crack Monitoring during Plasma Spraying of Ceramic Coatings by Non-Contact Acoustic Emission Method
- Influence of Deaerated Condition on the Corrosion Behavior of AZ31 Magnesium Alloy in Dilute NaCl Solutions
- Corrosion Behavior of AZ31 Magnesium Alloy in Dilute Sodium Chloride Solutions
- On the Applicability of TiO_2-based Coatings for Cathodic Protection of Type 430 Stainless Steel
- Importance of the Adhesion of HVOF Sprayed Coatings for Aqueous Corrosion Resistance
- Steam Oxidation Studies on 50Ni-50Cr HVOF Coatings on 9Cr-1Mo Steel : Change in Structure and Morphology across the Coating/Substrate Interface
- Characterization of Electroplated Platinum-Iridium Alloys on the Nickel-Base Single Crystal Superalloy
- Bi-Substitution Effects on Crystal Structure and Thermoelectric Properties of Ca3Co4O9 Single Crystals
- Observation of High Resolution Microstructures in Thermal Sprayed Coatings and Single Deposited Splats Using Ion Beam Milling
- Effects of Silicon and Boron on Oxidation Behavior of Air Plasma Sprayed Fe-based alloy Coatings
- In-Situ Densification of Ti Coatings by the Warm Spray (Two-Stage HVOF) Process
- Corrosion Resistance of HastelloyC Coatings Formed by an Improved HVOF Thermal Spraying Process
- Microstructure and Corrosion Resistance of HVOF Sprayed 316L Stainless Steel and Hastelloy C Coatings
- Comparison of Microstructure and Oxidation Behavior of CoNiCrAlY Bond Coatings Prepared by Different Thermal Spray Processes
- Effect of Spray Condition and Heat Treatment on the Structure and Adhesive Wear Properties of WC Cermet Coatings
- Oxidation Restriction of In-flight Particles upon GS-HVOF Spraying by Nitrogen Addition to Combustion Gas
- Crevice Corrosion Behavior of Nitrogen Bearing Austenitic Stainless Steels
- Thermal Cycling Behavior of Plasma Sprayed Segmented Thermal Barrier Coatings
- Effects of Heat Treatment on Microstructures and Physical Properties of Segmented Thermal Barrier Coatings
- Microstructural Investigation of CoNiCrAlY Coated Ni-Based Single Crystal Superalloy Prepared by LPPS
- Torsion and Tensile Properties of Thin Wires of Nickel-Free Stainless Steel with Nitrogen Absorption Treatment
- Mechanical Properties of Thin Wires of Nickel-Free Austenintic Stainless Steel with Nitrogen Absorption Treatment
- Mechanical Properties and Microstructures of a Thin Plate of Nickel-Free Stainless Steel with Nitrogen Absorption Treatment
- New Manufacturing Process of Nickel-Free Austenitic Stainless Steel with Nitrogen Absorption Treatment
- Effects of Corona Discharge on the Formation of Electrically-Extracted Liquid Jets
- Effect of Surface Treatment and Crystal Orientation on Microstructural Changes in Aluminized Ni-Based Single-Crystal Superalloy
- Detection of AE Events due to Cracks in TBC during Spraying Process
- Growth Mechanism of Polypyrrole through Electrochemical Polymerization
- In-Beam Stress Corrosion Tests for Welded 308 Stainless Steel in Pure Water at 473 K