Effects of Second Phase Particles on Migration of α/γ Interface during Isothermal α to γ Transformation

スポンサーリンク

概要

• 論文の詳細を見る

• The effects of insoluble particles on migration of ferrite (α)/austenite (γ) interface during isothermal α to γ transformation at 1133 K have been studied by means of a model experiment using diffusion couple method and a multi-phase field simulation. It was found that the insoluble particles, ZrO2 or TiO2 particles, could retard the migration of α/γ interface. And the tendency that the retarding effect becomes stronger with higher volume fraction of TiO2 particle was observed. However, the retarding effect of ZrO2 on α/γ interface is not as strong as that on δ–ferrite (δ)/austenite (γ) interface during peritectic transformation. The phase field simulation indicates that this reduction of retarding effect originates from the appearance of carbon pile-up in γ phase, which is also caused by the existence of particles. In addition, it is shown that the difference between σα/p and σγ/p, the interfacial energy between matrix (α or γ) and particles, strongly affects the migration velocity of α/γ interface.

著者

• Ohno Munekazu

  Division Of Material Science And Engineering Graduate School Of Engineering Hokkaido University

• Matsuura Kiyotaka

  Division Of Material Science And Engineering Hokkaido University

• Sato Daisuke

  Graduate School Of Biological Sciences Nara Institute Of Science And Technology

• Chen Liang

  Graduate School Of Engineering Hokkaido University

関連論文

• Theoretical Investigation of Coarsening Process of L1_0-Ordered Domain Based on Phase Field Method and Cluster Variation Method
• Disorder-L1_0 Transition Investigated by Phase Field Method with CVM Local Free Energy
• Powder-Metallurgical Process for Producing Metallic Microchannel Devices
• Freeform Fabrication of Titanium by 3D Micro Welding(Materials, Metallurgy & Weldability)
• Padding, Welding and Freeform Fabrication of Nickel Aluminide Intermetallic Compound by Reactive Rapid Prototyping Process
• Padding, Welding and Freeform Fabrication of Nickel Aluminide Intermetallic Compound by Reactive Rapid Prototyping Process
• Transient Behavior of a Stress-Strain Curve within Cottrell-Stokes Law
• Effect of Niobium on the Formation of Microstructure and Grain Boundary in Fe-Nb and Fe-C-Nb Alloys
• Thermodynamic Calculation of Phase Equilibria in As-Fe-In Ternary System Based on CALPHAD Approach
• Numerical Analysis on Columnar-to-equiaxed Transition of δ-Ferrite Dendrite in Carbon Steel Induced by Titanium Carbonitride Particles
• As-cast Austenite Grain Structure in Al Added 0.2wt% Carbon Steel
• Refinement of As-cast Austenite Grain in Carbon Steel by Addition of Titanium
• Refinement of As-cast Austenite Microstructure in S45C Steel by Titanium Addition
• Refinement of Austenite Grain in Carbon Steel by Addition of Titanium and Boron
• Fabrication of NiAl/Steel Cladding by Reactive Casting
• Reactive Casting of Ni-Al-Fe Ternary Intermetallic Alloys
• In-situ Joining of Nickel Monoaluminide to Iron by Reactive Sintering
• Aluminide Coating on Niobium by Arc Surface Alloying
• Grain Refinement of Combustion-synthesized NiAl by Addition of AL_2O_3 Particles
• Combustion synthesis of Al-Ni alloys by a pseudo-HIP process
• Changes in Microstructure and Mechanical Properties during Solid Sintering of Ni-Al Mixed Powder Compact
• Photocatalytic Properties of TiO_2 Films Deposited by Reactive Sputtering in Mid-Frequency Mode with Dual Cathodes
• Bacterial Communities in Petroleum Oil in Stockpiles (Environmental Biotechnology)
• Reactive Casting of B2-Ordered Ni-Al-Co Ternary Intermetallic Alloys
• Refinement and Localization of Primary Intermetallic Compound in Hyperperitectic Al-Cr Alloy by Centrifugal Duplex Casting
• Reactive sintering of molybdenum alumino-silicide and its oxidation resistance
• Simulation of Peritectic Reaction during Cooling of Iron-Carbon Alloy
• Methodological Progress for Computer Simulation of Solidification and Casting
• Grain Refinement and Improvement in Mechanical Properties of Nb-Al-Si Intermetallic Alloys
• Effects of Cooling Rate on Growth Behavior of Austenite Phase during Peritectic Reaction in Iron-Carbon Binary Alloy
• Effects of Al and P Additions on As-cast Austenite Grain Structure in 0.2mass% Carbon Steel
• Effects of Cr Addition on Coarse Columnar Austenite Structure in As-Cast 0.2mass% Carbon Steel
• Pseudo-HIP Combustion Synthesis of FeAl-TiB_2 Composites
• Motion and Morphology of Triple Junction in Peritectic Reaction Analyzed by Quantitative Phase-field Model
• Use of Recycled Steel Machining Chips and Aluminum Can Shreds for Synthesizing Iron Aluminide Intermetallic Alloys
• Effects of Second Phase Particle Dispersion on Kinetics of Isothermal Peritectic Transformation in Fe–C Alloy
• Suppression of Coarse Columnar Grain Formation in As-cast Austenite Structure of a Hyperperitectic Carbon Steel by Nb Addition
• Effects of Second Phase Particle Dispersion on Kinetics of Isothermal Peritectic Transformation in Fe-C Alloy
• Effects of Second Phase Particles on Migration of α/γ Interface during Isothermal α to γ Transformation
• Rate of Peritectic Reaction in Iron-Carbon System Measured by Solid/Liquid Diffusion Couple Method.
• Effects of Ti Addition on Austenite Grain Growth during Reheating of As-Cast 0.2 mass% Carbon Steel
• Signal Processing Method of Holographic Memory Using Image Distortion Correction and Soft Decision Viterbi Decoding Method
• Effects of Ti Addition on Austenite Grain Growth during Reheating of As-Cast 0.2 mass% Carbon Steel

もっと見る 閉じる

スポンサーリンク