Effects of Cr Addition on Coarse Columnar Austenite Structure in As-Cast 0.2mass% Carbon Steel
スポンサーリンク
概要
- 論文の詳細を見る
Effects of Cr addition on as-cast Coarse Columnar austenite Grain (CCG) structure were investigated for 0.2 mass% carbon steel by means of rapid unidirectional solidification method which realizes cooling conditions similar to those in the vicinity of continuous cast slab surface. Although the as-cast structure of the unidirectionally solidified samples always consisted of the CCGs regardless of Cr addition, the aspect ratio of the CCGs was remarkably reduced by the Cr addition. During solidification, Fine Columnar austenite Grains (FCGs) existed at the growing front of the CCG region and the migration velocity of the FCG/CCG boundary was reduced by the Cr addition. EPMA analysis revealed that the Cr addition enhances P segregation at interdendritic positions, which lowers a temperature for completion of γ transformation, Tγ. This lowered Tγ reduces the migration velocity of the FCG/CCG boundary and, as a result, induces the formation of CCGs having shorter major axis diameters.
- 社団法人 日本鉄鋼協会の論文
- 2010-12-15
著者
-
Matsuura Kiyotaka
Div. Of Materials Sci. And Engineering Graduate School Of Engineering Hokkaido Univ.
-
Ohno Munekazu
Division Of Material Science And Engineering Graduate School Of Engineering Hokkaido University
-
Matsuura Kiyotaka
Division Of Material Science And Engineering Hokkaido University
-
Isobe Kohichi
Muroran R&d Laboratory Nippon Steel Corporation
-
TSUCHIYA Shingo
Graduate School of Engineering, Hokkaido University
-
Isobe Kohichi
Muroran R&d Lab. Nippon Steel Corp.
-
ISOBE Kohichi
Muroran R&D Lab., Nippon Steel Corp.
関連論文
- Theoretical Investigation of Coarsening Process of L1_0-Ordered Domain Based on Phase Field Method and Cluster Variation Method
- Disorder-L1_0 Transition Investigated by Phase Field Method with CVM Local Free Energy
- Powder-Metallurgical Process for Producing Metallic Microchannel Devices
- Freeform Fabrication of Titanium by 3D Micro Welding(Materials, Metallurgy & Weldability)
- Padding, Welding and Freeform Fabrication of Nickel Aluminide Intermetallic Compound by Reactive Rapid Prototyping Process
- Padding, Welding and Freeform Fabrication of Nickel Aluminide Intermetallic Compound by Reactive Rapid Prototyping Process
- Transient Behavior of a Stress-Strain Curve within Cottrell-Stokes Law
- Effect of Niobium on the Formation of Microstructure and Grain Boundary in Fe-Nb and Fe-C-Nb Alloys
- Solidification Behavior of Iron-Niobium and Iron-Carbon-Niobium alloys
- Thermodynamic Calculation of Phase Equilibria in As-Fe-In Ternary System Based on CALPHAD Approach
- Numerical Analysis on Columnar-to-equiaxed Transition of δ-Ferrite Dendrite in Carbon Steel Induced by Titanium Carbonitride Particles
- As-cast Austenite Grain Structure in Al Added 0.2wt% Carbon Steel
- Effects of Addition of Titanium and Boron on Columnar Austenite Grain in Carbon Steel
- Refinement of As-cast Austenite Grain in Carbon Steel by Addition of Titanium
- Refinement of As-cast Austenite Microstructure in S45C Steel by Titanium Addition
- Refinement of Austenite Grain in Carbon Steel by Addition of Titanium and Boron
- Fabrication of NiAl/Steel Cladding by Reactive Casting
- Reactive Casting of Ni-Al-Fe Ternary Intermetallic Alloys
- In-situ Joining of Nickel Monoaluminide to Iron by Reactive Sintering
- Aluminide Coating on Niobium by Arc Surface Alloying
- Grain Refinement of Combustion-synthesized NiAl by Addition of AL_2O_3 Particles
- Combustion synthesis of Al-Ni alloys by a pseudo-HIP process
- Changes in Microstructure and Mechanical Properties during Solid Sintering of Ni-Al Mixed Powder Compact
- Reactive Casting of B2-Ordered Ni-Al-Co Ternary Intermetallic Alloys
- Refinement and Localization of Primary Intermetallic Compound in Hyperperitectic Al-Cr Alloy by Centrifugal Duplex Casting
- Reactive sintering of molybdenum alumino-silicide and its oxidation resistance
- Simulation of Peritectic Reaction during Cooling of Iron-Carbon Alloy
- Formation conditions of coarse columnar austenite grain structure in peritectic carbon steels by the discontinuous grain growth mechanism
- Methodological Progress for Computer Simulation of Solidification and Casting
- Grain Refinement and Improvement in Mechanical Properties of Nb-Al-Si Intermetallic Alloys
- Effects of Cooling Rate on Growth Behavior of Austenite Phase during Peritectic Reaction in Iron-Carbon Binary Alloy
- Effects of Al and P Additions on As-cast Austenite Grain Structure in 0.2mass% Carbon Steel
- Effects of Cr Addition on Coarse Columnar Austenite Structure in As-Cast 0.2mass% Carbon Steel
- Pseudo-HIP Combustion Synthesis of FeAl-TiB_2 Composites
- Fabrication of TiB_2 Particle Dispersed FeAl-based Composites by Self-propagating High-temperature Synthesis
- Motion and Morphology of Triple Junction in Peritectic Reaction Analyzed by Quantitative Phase-field Model
- Use of Recycled Steel Machining Chips and Aluminum Can Shreds for Synthesizing Iron Aluminide Intermetallic Alloys
- Transition of solidification mode and the as-cast γ grain structure in hyperperitectic carbon steels
- Austenite Grain Growth in Peritectic Solidified Carbon Steels Analyzed by Phase-Field Simulation
- Effects of Second Phase Particle Dispersion on Kinetics of Isothermal Peritectic Transformation in Fe–C Alloy
- Suppression of Coarse Columnar Grain Formation in As-cast Austenite Structure of a Hyperperitectic Carbon Steel by Nb Addition
- Effects of Second Phase Particle Dispersion on Kinetics of Isothermal Peritectic Transformation in Fe-C Alloy
- Effects of Second Phase Particles on Migration of α/γ Interface during Isothermal α to γ Transformation
- Rate of Peritectic Reaction in Iron-Carbon System Measured by Solid/Liquid Diffusion Couple Method.
- Effects of Ti Addition on Austenite Grain Growth during Reheating of As-Cast 0.2 mass% Carbon Steel
- Effects of Ti Addition on Austenite Grain Growth during Reheating of As-Cast 0.2 mass% Carbon Steel