Texture development of surface-modified SiC prepared by EPD in a strong magnetic field
スポンサーリンク
概要
- 論文の詳細を見る
Silicon carbide is a very important material for various applications and its properties are expected to be improved by controlling the crystallographic orientation. It was difficult to simultaneously consolidate SiC powder and sintering additives by electrophoretic deposition (EPD) because of the different electrophoretic mobility. When using the alumina-coated SiC by the sol–gel method, it is possible to deposit SiC and sintering additives by EPD at the same time.In this study, we demonstrated that the c-axis alignment of SiC was controlled by EPD and a strong magnetic field, and we investigated the effect of the surface-modification on the microstructure and the degree of orientation. The dilute solution and the large number of repeated coating times prevent the oxide phase from precipitating at the multiple grain junctions and enhance grain growth. The grain growth promoted the degree of orientation in the textured SiC prepared by EPD in a strong magnetic field.
著者
-
Suzuki Tohru
Fine Particle Processing Group Nano Ceramics Center National Institute For Materials Science
-
Uchikoshi Tetsuo
National Inst. Of Material Sci.
-
Uchikoshi Tetsuo
Nano Ceramics Center National Institute For Materials Sciences (nims)
-
Uchikoshi Tetsuo
National Institute For Materials Science
-
SAKKA Yoshio
Materials Engineering Laboratory, National Institute for Materials Science
-
Muto Hiroyuki
Department Of Materials Science Faculty Of Engineering Toyohashi University Of Technology
-
Matsuda Atsunori
Department Of Materials Science Toyohashi University Of Technology
-
SUZUKI Tohru
Materials Processing Unit, National Institute for Materials Science
-
UCHIKOSHI Tetsuo
Materials Processing Unit, National Institute for Materials Science
-
SAKAKIBARA Saki
Department of Electrical and Electronic Information Engineering, Toyohashi University of Technology
-
Suzuki Tohru
Nano Ceramics Center National Institute For Materials Science
-
Suzuki Tohru
National Research Institute For Metals
-
SAKKA Yoshio
Materials Processing Unit, National Institute for Materials Science
-
MATSUDA Atsunori
Department of Electrical and Electronic Information Engineering, Toyohashi University of Technology
-
MUTO Hiroyuki
Department of Electrical and Electronic Information Engineering, Toyohashi University of Technology
関連論文
- Fabrication of GDC/LSGM/GDC tri-layers on polypyrrole-coated NiO-YSZ by electrophoretic deposition for anode-supported SOFC
- Textured lead titanate ceramics fabricated by slip casting under a high magnetic field
- A-13 SOFT COMBUSTION SYNTHESIS OF NANOCRYSTALS SEMI-CONDUCTING TETRAGONAL ZIRCONIA POWDER(Session: Ceramics III)
- Emission color tuning of laminated and mixed SiAlON phosphor films by electrophoretic deposition
- Electrophoretic deposition of Eu^ doped Ca-α-SiAlON phosphor particles for packaging of flat pseudo-white light emitting devices(SiAlons and Non-oxides)
- The Crystal Orientation Taking Account of Gravity Force under High Magnetic Field
- The crystal orientation taking account of gravity force under high magnetic field
- Alignment of Titania Whisker by Colloidal Filtration in a High Magnetic Field : Instrumentation, Measurement, and Fabrication Technology
- Effect of bead-milling treatment on the dispersion of tetragonal zirconia nanopowder and improvements of two-step sintering
- Tri-axial Grain Orientation of Y_2Ba_4Cu_7O_y Achieved by the Magneto-science Method
- Rare-Earth-Dependent Magnetic Anisotropy in REBa_2Cu_3O_y
- Fabrication of Textured α-SiC Using Colloidal Processing and a Strong Magnetic Field
- Texture Development in Si_3N_4 Ceramics by Magnetic Field Alignment during Slip Casting(Sintering and Microstructure,Guest Editors Dedicated to Prof. Gunter Petzow: Modern Trends in Advanced Ceramics)
- Fracture Toughness of Yttria-Stabilized Cubic Zirconia (8Y-CSZ) Doped with Pure Silica
- Effect of Ultrasonication on Colloidal Dispersion of Al_2O_3 and ZrO_2 Powders in pH Controlled Suspension
- 01-P-48 Electrophoretic Deposition Characteristics of Alumina particles in Aqueous Media
- Sorption and Desorption Characteristics of Water Vapour on YBa_2Cu_3O_ Powders
- Synthesis and characterization of polyaniline nanofiber/TiO2 nanoparticles hybrids
- Texture development in anatase and rutile prepared by slip casting in a strong magnetic field
- Platelike Crystal Growth of Zn-Al Layered Double Hydroxide by Hot Water Treatment of Sol-Gel Derived Al_2O_3-ZnO Films on Glass Substrate
- Effect of Milling Treatment on Texture Development of Hydroxyapatite Ceramics by Slip Casting in High Magnetic Field
- Determination of Easy Magnetization Axis of Mordenite Zeolite
- Design and synthesis of mesoporous ZrO2 thin films using surfactant Pluronic P123 via sol–gel technique
- Lithium Insertion Behaviour of (H3N(CH2)3NH3)[V4O10] (特集 電池・イオン導電性材料)
- Development of Thermoelectric Bi-Based Cobaltites with an Easy Axis of Magnetization Parallel to the C-Axis for Magnetic Alignment
- Grain Boundary Sliding and Atomic Structures in Alumina Bicrystals with [0001] Symmetric Tilt Grain Boundaries
- Fabrication of Ordered Macroporous Structures Based on Hetero-Coagulation Process Using Nanoparticle as Building Blocks
- A Comparison of Fine-Grained Alumina-Zirconia Prepared by Slip Casting and Electrophoretic Deposition (特集 超微細結晶粒材料の作成と物性)
- Preparation and Characterization of Lithium Ion Conducting Glass-Polymer Composites
- Preparation of Super-Water-Repellent Alumina Coating Film with High Transparency on Poly(ethylene terephthalate)by the Sol-Gel Method
- Proton Conductive Silica Gels Doped with Several Acids and Their Application to Electric Double-Layer Capacitor
- Mechanical properties comparison of phenylsilsesquioxane–methylsilsesquioxane hybrid films by indentation
- Sol–gel synthesis of novel photosensitive material with advanced holographic properties
- Texture development of surface-modified SiC prepared by EPD in a strong magnetic field
- The manufacturing process of fine Shirasu balloons using a fluidized sand-bed furnace
- Fabrication of the oriented LiCoO2 sheet using a strong magnetic field
- Fabrication of Textured Titania by Slip Casting in a High Magnetic Field Followed by Heating
- Fabrication of Textured Hematite via Topotactic Transformation of Textured Goethite
- Control of Texture in ZnO by Slip Casting in a Strong Magnetic Field and Heating
- Preface(Novel Materials Design and Processing by External and Internal Reaction Fields)
- Estimation of interfacial proton conductivity by effective media approximation for sheet-like composite electrolyte prepared from poly(2-acrylamido-2-methyl-1-propanesulfonic acid)-deposited core–shell particles
- Effects of Phenyltriethoxysilane Concentration in Starting Solutions on Thermal Properties of Polyphenylsilsesquioxane Particles Prepared by a Two-Step Acid-Base Catalyzed Sol-Gel Process
- Influence of La2O3 addition on thermophysical properties of ZrO2-4 mol %Y2O3 ceramics fabricated by spark plasma sintering
- Fuel-free low-temperature self-combustion synthesis and characterization of praseodymium-substituted bismuth titanate ceramics
- Electricity producing property and bacterial community structure in microbial fuel cell equipped with membrane electrode assembly(ENVIRONMENTAL BIOTECHNOLOGY)
- Development of Thermoelectric Bi-Based Cobaltites with an Easy Axis of Magnetization Parallel to the $C$-Axis for Magnetic Alignment