Investigation of measuring accuracy of automatic plugging indicator.
スポンサーリンク
概要
- 論文の詳細を見る
In order to improve the measuring accuracy of plugging indicators, the relation be-tween the measured temperature and the impurity saturation temperature was investi-gated analytically for the oscillating plugging indicator. In the analysis, the differences between the true saturation temperature and the "plugging" or "unplugging" temperature were studied in view of the impurity precipitating mechanism.<BR>By this investigation, the difference of measured temperature from the saturation temperature can be evaluated by a function of the dimensionless numbers Re and St and the suitable operating conditions on which the measurement error becomes small are ob-tained.
- 一般社団法人 日本原子力学会の論文
著者
-
MURASE Michio
Energy Research Laboratory, Hitachi Ltd.
-
Izumi Shigeru
Energy Research Laboratory Hitachi Ltd.
-
YAMAMOTO Hajime
Energy Research Laboratory, Hitachi Ltd.
-
SUMIDA Isao
Energy Research Laboratory, Hitachi Ltd.
-
SAGAWA Norihiko
Energy Research Laboratory, Hitachi Ltd.
関連論文
- Effect of a Divided Wetwell on Heat Removal Capability of the Water Wall Type Passive Containment Cooling System
- Study of the Effects of Sodium Aerosol Behavior on the Characteristics of the Sodium Ionization Detector
- Application of Fission Chamber to Uranium Microanalysis
- Detection of Fine Particles in Liquids by Laser Breakdown Method
- Particle Size Dependence of Correlation between Plasma Emission Delay Time and Plasma Emission Intensity of Laser Breakdown Induced by a Particle
- BWR Loss of Coolant Integral Tests with Two Bundle Loop, (II) : Effect of ECCS Activation Modes on Thermal-Hydraulic Characteristics
- Investigation of Slip Correlation in Two-Phase Flow
- Experimental Study of Effect of Geometry on Density-Head-Driven Instability in Boiling Channels
- Experimental Study on Heat Removal Characteristics for Water Wall Type Passive Containment Cooling System.
- Experimental Analysis on Mitigation of Thermal Stratification in the Suppression Pool of a Water Wall Type Passive Containment Cooling System.
- Investigation of measuring accuracy of automatic plugging indicator.
- Evaluation model of turbine meter for two-phase flow.
- Countercurrent gas-liquid flow in boiling channels.
- Countercurrent air-water flow in two vertical channels.
- Method for determination of saturated temperature with automatic plugging indicator.
- Using anemometer for particle size measurement of sodium mist.
- Evaluation of sodium trapping efficiency of mesh-pack-type sodium vapor trap.
- Performance Analysis of mesh-packed type sodium vapor trap.
- Determination of sodium aerosol depletion rate in circular conduits.
- Development of fluctuation monitor type sodium ionization detector.
- Matrix method for vibration analysis of jet pumps.
- Drift-flux parameters for upward gas flow in stagnant liquid.
- Vibration monitor for rotating machines using average frequency technique.
- Application of pattern recognition techniques to location of impact sound sources on pressure vessels.
- Performance analysis of mesh-packed cold traps.
- Numerical study of depressurization rate during blowdown based on lumped model analysis.