Effect of Contact Materials of Ag/SnO2 and Ag/ZnO on Rotational Motion of Break Arcs Driven by Radial Magnetic Field

スポンサーリンク

概要

• 論文の詳細を見る

• Break arcs are generated between electrical contacts in a DC 42V resistive circuit. Contact materials are Ag/SnO2 and Ag/ZnO. Circuit current when contacts are closed is varied from 5A to 21A. The radial magnetic field to drive break arcs is formed between the contact gap with a permanent magnet embedded in the cathode. The arc motion is observed with a high-speed camera. Experimental results with the magnet are compared with those without the magnet. Following results are shown. Similar experimental results to pure silver contacts are obtained for Ag/SnO2 and Ag/ZnO contact pairs. The rotational motion of the break arcs and the shortening effect of the arc duration are confirmed. The ring-shaped, wide and uniform traces are observed on the contact surfaces after break operations. This result shows the prevention effect of local erosion of electrical contacts and the reduction of total amount of contact erosion. The rotational frequency f is increased with the increase of the arc current Iarc. These results for Ag/SnO2 and Ag/ZnO contact pairs are similar to the results for pure silver contacts in our previous experiments. The rotational frequency of the break arc for the Ag/SnO2 and Ag/ZnO contacts is lower than that for the pure silver contacts.

• （社）電子情報通信学会の論文

著者

• Kubono Takayoshi

  Shizuoka Univ. Hamamatsu‐shi Jpn

• SEKIKAWA Junya

  Shizuoka University

• KUBONO Takayoshi

  Emeritus Professor Shizuoka University

関連論文

• Rotational Motion of Break Arcs Driven by Radial Magnetic Field in a DC Resistive Circuit
• Dependence of Motion of Breaking Arc on Contact Separating Speed for Ag and Pd Contact Pairs in a DC42V Resistive Circuit(Arc Discharge & Related Phenomena,Recent Development of Electromechanical Devices (Selected Papers from ICEC2006))
• Optical Observation of Arc Discharges between Electrical Contacts Breaking at Low Speed in a DC42V Resistive Circuit (国際セッション IS-EMD2005) -- (Arc Discharges & Related Phenomena)
• Cathode and Anode Bright-Spot Behaviors of Breaking Arc between Electrical Contacts (国際セッション IS-EMD2005) -- (Arc Discharges & Related Phenomena)
• Erosion of Electrical Contact Surfaces in Breaking Arcs at Low Separating Speed (国際セッション IS-EMD2005) -- (Arc Discharges & Related Phenomena)
• Observations of the Eroded Surfaces and the Motion of Arc Spots at Each Breaking Operation of Silver Electrical Contacts(Arc Discharge & Related Phenomena, IS-EMD2004-Recent Development of Electro-Mechanical Devices)
• Cathode and Anode Bright-Spot Behaviors of Breaking Arc between Electrical Contacts with Low Separating Speed(Arc Discharge & Related Phenomena, IS-EMD2004-Recent Development of Electro-Mechanical Devices)
• Temperature Measurement of Breaking Arcs between Cu-Cu, Ni-Ni and Pd-Pd contact pairs in a DC 42V-10A(Session 8 : Automotive Application)
• Cathode and Anode Bright Spot Behaviors of Breaking Arc between Electrical Contacts with the Low Separating Speed(Session 2 : Arc Discharges & Related Phenomena)
• Comparison between the Surface Condition of Electrical Contacts and the Behavior of breaking Arcs Observed with a High-speed Camera(Session 2 : Arc Discharges & Related Phenomena)
• Temperature Measurements of Breaking Arc between Copper Contacts at Three Constant Speeds (10,20 and 30 mm/s)(Arc Discharge)(IS-EMD2003 : Recent Technical Trend of Electro-Mechanical Devices)
• Temperature Measurements and Behavior Observations of Breaking Arc between Copper Contacts (国際セッションIS--EMD 2003) -- (Session 4 Arc discharges and related phenomena)
• Temperature Measurements and Behavior Observations of Breaking Arc between Copper Contacts
• Effect of Contact Materials of Ag/SnO2 and Ag/ZnO on Rotational Motion of Break Arcs Driven by Radial Magnetic Field
• Time-Resolved Spectroscopic Temperature Measurement of Break Arcs in a D.C.42V Resistive Circuit
• Motion of Break Arcs Driven by External Magnetic Field in a DC42 V Resistive Circuit
• A Proposal on a New Algorithm for Volume Calculation Based on Laser Microscope Data(Contact Phenomena, IS-EMD2004-Recent Development of Electro-Mechanical Devices)
• Transferred Pip Formed on Ag Contacts Mounted on Relays in a DC42C Resistive Circuit
• Metal Transfer and Contact Bounce of Silver and Palladium Switching Contacts Mounted on Relays in a direct current Circuit (国際セッションIS-EMD2005) -- (Relays and Switches)
• The Relationship between Exchange of Applied Voltage Polarity and Growth of Transferred Pip on Ag/CdO Make-only Contacts in a DC42V-10A Circuit (国際セッション IS-EMD2005) -- (Automotive Application)
• Growth of Transferred Pip on AgNi10wt% Make-Only Contacts Mounted on Relays in a DC42V Circuit (国際セッション IS-EMD2005) -- (Automotive Application)
• Some Characteristics of AgPd40wt% Contacts in DC42V-6A or DC42V-4.2A Resistive Circuit (国際セッション IS-EMD2005) -- (Automotive Application)
• The Bi-directional Observation of Transferred Pips Formed on Ag/CdO12wt% Electric Contacts in DC42V-5A and 10A Resistive Circuit (国際セッション IS-EMD2005) -- (Automotive Application)
• Growth of Transferred Pip and Electrical Properties of AgCdO Make-Only Contacts in Resistive Circuit with DC 14 V and 42 V Power Supply(Automotive Application, IS-EMD2004-Recent Development of Electro-Mechanical Devices)
• Observation of Pips Formed on Ag/SnO_2 Contacts in DC14 V-21 A Resistive Circuit(Automotive Application, IS-EMD2004-Recent Development of Electro-Mechanical Devices)
• Growth of Transferred Pip and Electrical Property on AgCdO Make-only Contacts in a Resistive Circuit with dc 14V and 42V Power Supply(Session 8 : Automotive Application)
• Observation of Pips Formed on Ag/SnO_2 Contacts in DC14V-20A Resistive Circuit(Session 8 : Automotive Application)
• The moving characteristic of the breaking arc spots depending on the separating speed of Ag electrical contacts
• Dependence of the Break arcs Driven by Transverse Magnetic Field on the Contact Opening Speed in a DC High-voltage Resistive Circuit
• Characteristics of Break Arcs Driven by Transverse Magnetic Field in a DC High-voltage Resistive Circuit
• Time-Resolved Spectroscopic Temperature Measurement of Break Arcs in a D.C.42 V Resistive Circuit
• Time-resolved Spectroscopic Temperature Measurement of Breaking Arcs in D.C.42V circuit
• Spectroscopic Temperature Measurement of Breaking Arcs Near Cathode and Anode Surfaces of Copper Contacts(Arc Discharge & Related Phenomena,Recent Development of Electromechanical Devices (Selected Papers from IS-EMD2005))
• Spectroscopic Temperature Measurement of Breaking Arcs near the Cathode and Anode Surfaces of Copper Contacts (国際セッション IS-EMD2005) -- (Arc Discharges & Related Phenomena)
• Rotational Motion of Break Arcs Driven by Radial Magnetic Field in a DC Resistive Circuit
• Effect of Contact Materials of Ag/SnO_2 and Ag/ZnO on Rotational Motion of Break Arcs Driven by Radial Magnetic Field
• Effect of Permanent Magnets Embedded in Electrical Contacts Mounted on Electro-magnetic Relays
• Characteristics of Break Arcs Driven by Transverse Magnetic Field in a DC High-Voltage Resistive Circuit
• Effect of Shapes of Contact Surfaces on Break Arcs occurring between Electrical Contacts in which a Magnet is embedded
• Arc Duration and Rotational Frequency of Break Arcs Driven by Radial Magnet Field in a DC42 V Resistive Circuit
• Position and Shape of Break Arcs Driven by Transverse Magnetic Field
• Reignition of Break Arcs Magnetically Blown-out in a 450V DC Resistive Circuit
• Break Arcs Driven by Transverse Magnetic Field in a DC48 V/6-24 A Resistive Circuit
• Reignition of Break Arcs Magnetically Blown-out in a 450V DC Resistive Circuit
• Position and Shape of Break Arcs Driven by Transverse Magnetic Field
• Effect of Shapes of Contact Surfaces on Break Arcs occurring between Electrical Contacts in which a Magnet is embedded
• Position and Shape of Break Arcs Driven by Transverse Magnetic Field

もっと見る 閉じる

スポンサーリンク