鋼モルタル板を用いた座屈拘束ブレースの実験的研究 : 芯材の降伏耐力および軸剛性の調節

概要

論文の詳細を見る
The core plates of budding-restrained braces are often required to yield at a small story deformation angle. Reducing the core plate cross-sectional area could decrease the yield strength, but this also decreases the axial stiffness. The use of a low-yield-point steel is limited due to limited variety. The yield strength can be decreased while maintaining its axial stiffness by reducing the core plate cross-sectional area and simultaneously increasing its end thickness. The adjustment of the yield strength and axial stiffness is also possible. In this paper, the effect of the yield strength and axial stiffness adjustment is examined using simplified calculation formulae. Tests are performed to verify the validity of the formulae. The energy absorption performance and failure mode characteristics are analyzed based on the test results.
社団法人日本建築学会の論文
2008-07-30