Sintering and Toughening Behavior of Dense SiC-coated Diamond Dispersed WC/Co Composites(Materials, Metallurgy & Weldability)
スポンサーリンク
概要
- 論文の詳細を見る
Hard protective layers of nanometer sized SiC grains to protect against oxidation and graphitization were coated on diamond particles by the reaction of SiO and diamond. The SiC coated diamond particles were mixed in 2O vol.% with WC-10wt.%Co and densified by using the SPS method. The sintering behavior in respect of the particle size of diamond, 8〜16μm, 2O〜3Oμm and 40〜60μm, was investigated. The relative densities of all composites reached 98%. The Vickers hardness increased slightly to 17.9GPa by dispersing 40〜60μm size diamond, but did not differ so much from the matrix hardness of WC/Co, this suggests no direct bonding between diamond particles, and weak bonding between diamond and matrix. However, the indentation toughness increased from 9.4MPam^<1/2> to 17.8MPam^<1/2> with diamond dispersion. Crack deflection, debonding and stopping were clearly seen around diamond particles.
- 大阪大学の論文
著者
-
Miyamoto Yoshinari
Osaka University
-
Jin Zhihao
Osaka University
-
Zhang Lixue
Osaka University
-
MORISADA Yoshiaki
Osaka University
関連論文
- 10-O-05 Defect Modes in 3D Photonic Crystal for Microwave Applications
- 01-O-32 SiC Coating on MWCNTs
- 1C24 砂漠砂の Si_3N_4-Si_2N_2O 化合物への転換
- Conversion of Aluminum Dross to Sialon-Based Ceramics by Combustion Synthesis(Materials, Metallurgy & Weldability)
- Fabrication and Mechanical Properties of Al_2O_3/TiC/Ni Symmetric Functionally Graded Materials Doped with Cu and Cu_2O^+(Materials, Metallurgy & Weldability)
- Freeform Fabrication of Titanium by 3D Micro Welding(Materials, Metallurgy & Weldability)
- Control of Microwave Emission from Photonic Crystals by Lattice Modification(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Synthesis of Si_2N_2O-SiC Composites from Desert Sand(Materials, Metallurgy & Weldability)
- Sintering and Toughening Behavior of Dense SiC-coated Diamond Dispersed WC/Co Composites(Materials, Metallurgy & Weldability)
- Fabrication and Mechanical Properties of Al_2O_3-SiC/TiC/Ni Functionally Graded Materials by SHS/HIP(Materials, Metallurgy & Weldability)
- Fabrication and Mechanical Behavior of Al_2O_3/TiC/Ni Graded Laminates with Surface Compressive Stresses(Materials, Metallurgy & Weldability)
- Fabrication of Dense TiAl/Ti_2AlC Composites by Pulsed-Electric Current Sintering and Their Mechanical Properties(Physics, Processes, Instruments & Measurements)
- Microstructure and Oxidation Resistance of Nanometer Sized SiC Coated Diamond Particles(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Development of Nanostructured SiC Coating on Advanced Carbon Materials and Their Applications
- Spark Plasma Sintering of Al_2O_3-TiC and AL_2O_3-TiC-Diamond Composites(Materials, Metallurgy & Weldability)