Fabrication and Mechanical Properties of Al_2O_3/TiC/Ni Symmetric Functionally Graded Materials Doped with Cu and Cu_2O^+(Materials, Metallurgy & Weldability)
スポンサーリンク
概要
- 論文の詳細を見る
Symmetric functionally gradedmaterials in the system of Al_2O_3/TiC/Ni with three different outer layers of the Al_2O_3-10vol%Cu, Al_2O_3-(5vol%Cu+5vol%Cu_2O) and Al_2O_3-10vol%Cu_2O were prepared by SHS/HIP process. Highly compressive residual stresses were induced in the Al_2O_3 matrix, resulting in enhancement of both hardness and toughness of the outer layer. Their tribological properties were investigated. A compressive residual stress is found to improve wear resistance of these FGMs.
- 大阪大学の論文
著者
-
Miyamoto Yoshinari
Osaka University
-
HIROTA Ken
Doshisha University
-
YAMAGUCHI Osamu
Doshisha University
-
LIN Junshan
Post Doctral Research Fellow
-
HIGUCHI Koji
Doshisha University
-
IWASA Mikio
Osaka National Research Institute
-
Yamaguchi O
Doshisha University
-
Lin J
Joining & Welding Research Institute Osaka University
-
Lin Junshan
Joining And Welding Research Institute Osaka University
-
Miyamoto Y
Osaka Univ. Osaka Jpn
-
Yamaguchi O
Toshiba Corp. Kawasaki‐shi Jpn
-
Hirota Ken
Doshisha Univ. Kyoto Jpn
関連論文
- 10-O-05 Defect Modes in 3D Photonic Crystal for Microwave Applications
- 01-O-32 SiC Coating on MWCNTs
- 1C24 砂漠砂の Si_3N_4-Si_2N_2O 化合物への転換
- Conversion of Aluminum Dross to Sialon-Based Ceramics by Combustion Synthesis(Materials, Metallurgy & Weldability)
- Fabrication and Mechanical Properties of Al_2O_3/TiC/Ni Symmetric Functionally Graded Materials Doped with Cu and Cu_2O^+(Materials, Metallurgy & Weldability)
- Freeform Fabrication of Titanium by 3D Micro Welding(Materials, Metallurgy & Weldability)
- Microstructure and Mechanical Properties of CrN-Based Composites with the Combined Addition of ZrO2(3Y) and Al2O3 (特集 HIP/CIPおよび関連技術)
- Spark Plasma Sintering(SPS)of Several Intermetalic Compounds Prepared by Self-propagating High-Temperature Synthesis(SHS)
- Characterization and Sintering of LaAlO_3 Powder Prepared by the Hydrazine Method
- Fabrication of Bulk Chromium Nitrides Using Self-Propagating High-Temperature Synthesis and Hot Isostatic Pressing (特集 硬質材料)
- Fabrication of Super-Sendust/Mg-ferrite Composite Materials by Spark Plasma Sintering and Their Magnetic and Electrical Properties (特集 磁性材料)
- Hot Isostatic Pressing of SnO2 Prepared by the Hydrazine Method (特集 ナノ構造制御と新機能発現)
- Hot Isostatic Pressing of Y_2O_3-Doped La_2Zr_2O_7 Prepared by the Hydrazine Method
- FORMATION AND CHARACTERIZATION OF STOICHIOMETRIC MULLITE(3Al_2O_3・2SiO_2)PREPARED BY THE HYDRAZINE METHOD
- Fabrication of Composite in the System ZrO2(2Y)/WSi2 Part 2 Electrical and Mechanical Properties of Laminated Materials with Three Layers (特集 ニュ-コンポジット材料2)
- Fabrication of Composite in the System ZrO2(2Y)/WSi2-1-Microstructures and Mechanical Properties of the Composites in the WSi2 Rich Region (ニュ-コンポジット材料)
- Control of Microwave Emission from Photonic Crystals by Lattice Modification(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Anodic Characterization of Nickel-Nickel Oxide Composite Materials Prepared by Sintering and Dispersion Coating Method (特集 New Trends in Molten Salt Chemistry and Electrochemistry)
- Synthesis of Si_2N_2O-SiC Composites from Desert Sand(Materials, Metallurgy & Weldability)
- Sintering and Toughening Behavior of Dense SiC-coated Diamond Dispersed WC/Co Composites(Materials, Metallurgy & Weldability)
- Fabrication and Mechanical Properties of Al_2O_3-SiC/TiC/Ni Functionally Graded Materials by SHS/HIP(Materials, Metallurgy & Weldability)
- Fabrication of A12O3/TiC/Ni Functionally Graded Materials by Pulsed-Electric Current Sintering and Their Mechamical Properties (特集 傾斜機能材料)
- Fabrication and Mechanical Behavior of Al_2O_3/TiC/Ni Graded Laminates with Surface Compressive Stresses(Materials, Metallurgy & Weldability)
- Microstructures and Mechanical Properties of TiAl/Ti_2AlC Composites Prepared by Pulsed-Electric Current Sintering
- カーボンナノファイバー(CNF)分散コンポジットにおけるCNF/マトリックス粒子間の界面 (第44回同志社大学理工学研究所研究発表報告会2006年度同志社大学ハイテク・リサーチ,学術フロンティア合同シンポジウム)
- Fabrication of Dense TiAl/Ti_2AlC Composites by Pulsed-Electric Current Sintering and Their Mechanical Properties(Physics, Processes, Instruments & Measurements)
- Breeding of a New Malting Barley Cultivar Houshun by the Bulbosum Method
- Microstructure and Oxidation Resistance of Nanometer Sized SiC Coated Diamond Particles(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Development of Nanostructured SiC Coating on Advanced Carbon Materials and Their Applications
- Spark Plasma Sintering of Al_2O_3-TiC and AL_2O_3-TiC-Diamond Composites(Materials, Metallurgy & Weldability)
- Analysis of mushroom diversity in successional young forests and equilibrium evergreen broad-leaved forests