浸炭硬化歯車の面圧強さに及ぼすショットピーニングの影響 : ショット投射速度とショット粒径の影響(機械要素,潤滑,工作,生産管理など)

概要

論文の詳細を見る
In order to investigate the influence of shot peening on the surface durability of case-hardened steel gears, the case-hardened steel gears shot-peened with different shot velocity and shot diameter were fatigue tested using a power circulating type gear testing machine. The hardness, the compressive residual stress and the surface roughness of the gears increased by the shot peening. The failure mode of all the test gears was pitting. The surface durability of the gear shot-peened under medium condition in this experimental range was higher than that of the non-peened gear, on the other hand those of lightly or strongly shot-peened gears were as much as that. Judging from the ρ_<max> - N curves and also the [A(δ_y/√<3>HV)]_<max> - N curves, it is denoted in this experimental range that the surface durability of case-hardened steel gears was influenced by the hardness and the surface roughness of the gears. Therefore, it is proposed in this experimental range that the medium shot peening condition, that is, 60 m/s shot velocity and 0.6mm shot diameter, should be selected in order to improve the surface durability of case-hardened steel gears.
社団法人日本機械学会の論文
2005-06-25