スターリングエンジンの発電特性に及ぼす燃料ガスの発熱量の影響(熱工学,内燃機関,動力など)

概要

論文の詳細を見る
The effective utilization of low calorific gas produced from solid fuels such as biomass with the gasification technology needs an engine generator with minimum allowable fuel gas requirements. Stirling engines have great advantages for the fuel gas diversity because they are external combustion engines. But there are few experimental reports on the utilization of low calorific gases in Stirling engines. In this research, we conducted two types of unit tests to clarify the effect of the heating value of a gas fuel on the engine performance. One is the non-premix test in which the fuel gas with the rated gas heating value of 13.8-25.6 MJ/Nm^3 is supplied only into the fuel gas supply port. And the other is the premix test in which the fuel gas with the gas heating value of 6.3-13.8 MJ/Nm^3 is supplied both into the fuel gas supply port and the combustion air supply port to expand the required gas heating value range. In the premix test, we demonstrated that we could decrease the lowest gas heating value down to 6.0 MJ/Nm^3. As the results, we could expand the gas heating value range and demonstrated that the rated power output can be obtained within the heating value range of 6.0-25.6 MJ/Nm^3 with the elecrical efficiency of about 30%. And we measured the exhaust gas content and observed both NO_x and CO emissions being below about 30 ppm (corrected to 14vol% O_2) in the same gas heating value range.
社団法人日本機械学会の論文
2007-04-25