累積損傷と地盤条件を考慮した設計用地震力低減係数の評価

概要

論文の詳細を見る
In current seismic design practice, the design yield strength of a structure is typically obtained through the use of strength reduction factor that reduces elastic strength demand to design levels. The strength reduction factor due to the inelastic behavior of structure is usually formulated in terms of target maximum ductility. This conventional approach fails to consider cumulative damage that occurs under cyclic loading. In this study, damage-based strength reduction factor was evaluated from the strength demands computed considering cumulative damage and different site conditions. The results indicate that the spectral shape of damage-based strength reduction factor has similarity with the conventional ductility-based reduction factor. An equivalent limit ductility ratio as a certain percentage of the monotonic ductility capacity may therefore also be used. This reduction depends on the monotonic ductility capacity and while it is not significantly affected by the natural period of the structure, it should be carefully evaluated in the case of soft soil site and where the natural period of the structure is close to the predominant period of ground motion. Simple expressions for estimating the damage-based strength reduction factor are also proposed.
社団法人日本建築学会の論文
2006-09-30