A New Method for Improving the Accuracy of SPM and Its Application to AFM in Liquids
スポンサーリンク
概要
- 論文の詳細を見る
In this paper presents an accurate AFM used in liquid that is free from the Z-directional distortion of a servo actuator is described. Two correction methods are employed in this AFM. One is the external-monitoring method, and the other is the in situ self-calibration method. The external-monitoring method, is based on the fact that PZT actuators from the same class show similar hysteresis patterns. The same voltage signal used to control the servo actuator is applied to another PZT actuator which is termed the reference actuator. The displacement of the reference actuator is measured by a displacement sensor. As a result, the distortion of the AFM image can be corrected satisfactorily. In the in situ self-calibration method, the derivative of the calibration curve function of the PZT actuator is calculated from the profile measurement data sets which are obtained by repeating measurements after a small Z-directional shift. Input displacement at each sampling point is approximately estimated first by using a straight calibration line. The derivative is integrated with reference to the approximate input to obtain the approximate calibration curve. Then the approximation of the input value of each sampling point is improved using the obtained calibration curve. Next the integral of the derivative is improved using the newly estimated input values. As a result of repeating these improving process, the calibration curve converges to the correct one, and the distortion of the AFM image can be corrected. Principles and experimental results of the two methods are presented.
- 一般社団法人日本機械学会の論文
- 1999-12-15
著者
-
Gao Wei
Department of Cardiology, Peking University Third Hospital, Key Laboratory of Molecular Cardiovascul
-
Gao Wei
Department Of Cardiology Peking University Third Hospital And Key Laboratory Of Molecular Cardiovasc
-
KIYONO Satoshi
Department of Mechatronics and Precision Engineering, Faculty of Engineering, Tohoku University
-
Kiyono Satoshi
Department Of Mechanical Engineering Tohoku University
-
Oka Toru
Mitsubishi Electric Cooperation
-
NOMURA Michinao
Fujitsu Cooperation
-
KWEON Hyun-Kyu
Department of Mechatronics, Faculty of Engineering, Tohoku University
-
LIU Qinggang
National Research Laboratory of Metrology
-
Kweon Hyun-kyu
Department Of Mechatronics Faculty Of Engineering Tohoku University
-
Gao Wei
Department Of Mechatronics Faculty Of Engineering Tohoku University
-
Gao Wei
Department Of Cardiology Peking University Third Hospital
-
Gao Wei
Department of Mechatronics, Faculty of Engineering, Tohoku University
関連論文
- Assessment of Coronary Artery Flow Velocity Pattern as a Long-Term Predictor of Left Ventricular Function and Cardiac Events after Percutaneous Coronary Intervention in Anterior Acute Myocardial Infarction
- Job Stress and Carotid Intima-media Thickness in Chinese Workers
- A New Multi-Probe Arrangement for Surface Profile Measurement of Cylinders
- On-Machine Measurement of Large Mirror Profile by Mixed Method
- A New Method for Improving the Accuracy of SPM and Its Application to AFM in Liquids
- Job Stress and Coronary Heart Disease : A Case-control Study using a Chinese Population
- Development of Measurement System of Angular Profile of the Polygonal Mirror Surface
- Precision Fabrication of a Large-Area Sinusoidal Surface Using a Fast-Tool-Servo Technique : Improvement of Local Fabrication Accuracy
- A New Method for Phase Readout in Phase Modulated Interferometer
- Measurement of multi-degree-of-freedom error motions of a precision linear air-bearing stage
- Association between job stress and newly detected combined dyslipidemia among Chinese workers: findings from the SHISO study
- Development of an AFM-Based System for In-Process Measurement of Micro-Defects on Machined Surfaces
- Design and construction of a two-degree-of-freedom linear encoder for nanometric measurement of stage position and straightness
- Basic Study on Measurement of 2-D Surface Profile : 2nd Report:Measurement Error Analysis
- Basic Study of the Measurement of 2-D Surface Profile : 1st report: Transfer Function and Resolution
- High-Speed Measurement of Large Area Micro-Structured Surfaces(Nano/micro measurement and intelligent instrument)
- Measurement of 2-D Surface Profile and Motion Errors by Using Software Datum
- Development of a Millimeter-Scale Scanning Tunneling Microscope
- Association between Job Stress and Newly Detected Combined Dyslipidemia among Chinese Workers : Findings from the SHISO Study
- Accurate Profile Measurement of Spherical Surfaces Using an Interferometer
- On-machine profile measurement of machined surface using the combined three-point method
- A Data Conversion Technique for Accurate Interferometric Testing of Spherical Surfaces
- Kidney transplantation in diabetic recipients with iliac atherosclerosis : Arterial anastomosis with Nakayama's ring pin stapler after endarterectomy
- Characterization of Dy
- Fast Calibration of Mean Sensitivity of Angle Sensor