アキシアルピストンポンプの斜板温度に及ぼす油圧作動油の影響(G11-2 シール,潤滑,ポンプ,G11 機素潤滑設計部門)

概要

論文の詳細を見る
Temperature of a swash plate of an axial piston pump was measured and seven kinds of hydraulic oils were assessed. Five thermo-couples were embedded in the swash plate and one thermistor was placed in the suction conduit of the pump. The test oils were mineral and synthetic type oils with the viscosity grade of 32 to 46, adding friction modifiers. The maximum discharge pressure was 20 MPa, discharge flow rate was 161/min, and the inlet oil temperature was 30℃. At the atmospheric to maximum discharge pressures, the temperatures, flow rates and the torque were measured, and then the swash plate temperature rises and the pump performance curve were obtained. In conclusion, i) A low viscous oil with the friction modifier gave a lower temperature rise; ii) As the discharge pressure increased, the temperature rises became larger, and iii) The types of the oils tested less influenced the performance curves.
一般社団法人日本機械学会の論文
2004-09-04