深海潜水調査船用浮力材 (第1報)
スポンサーリンク
概要
- 論文の詳細を見る
There is an ever increasing need for man to descend deeper in the ocean, for there are sources of food, minerals, oil and etc. and the investigation to realize the efficient submersible that can descend to the depths of 6,000m has been conducted in various fields of technology. One of the major factors limiting the rapid exploration and exploitation of the undersea has been the materials problem, especially the buoyancy material to achieve neutral buoyancy at great depth. As the buoyancy material, gasoline was used in "Trieste" and "Archimedes". But it has several inherent disadvantages such as high compressibility, flammability and high density and it is a key factor in building more small and maneuverable deep submersibles to develop a more efficient floatation system. For this purpose, syntactic foam, hollow glass microsphere embeded in resin matrix, is developed. This material has great advantages compared to the other candidates and is now produced for the submersibles of operating depth 2,000 to 3,000m, but not for 6,000m submersible use. We have been engaged in the development of higher strength and lower density syntactic foam available for 6,000m submersible and some experiments were done to have more information about deep sea application. As the results, we reached to the conclusion that we can produce the syntactic foam suitable for 6,000m submersible and not only for deep submersible application, foams of various strength and properties can be produced according to it's operating depth. Succeeding to the first stage investigation reported here, we are now engaged in the farther development of this material to ascertain it's properties. This will be reported on another occasion.
- 社団法人日本船舶海洋工学会の論文
- 1971-06-30
著者
-
石川 隆之
昭和高分子株式会社東京研究所
-
遠藤 倫正
三菱重工業株式会社 神戸造船所
-
横田 公男
三菱重工業(株)神戸造船所
-
難波 直愛
三菱重工業(株)神戸造船所
-
関川 正文
三菱重工業株式会社神戸研究所
-
遠藤 倫正
三菱重工業(株)神戸造船所
-
難波 直愛
三菱重工業(株)
関連論文
- 242 Ti-6Al-4V 合金溶接部の破壊じん性及び応力腐食割れ感受性
- 202 Ti-6Al-4V 合金溶接部の疲労強度特性
- 129 深海潜水調査船チタン合金耐圧殻の工作法の研究
- 深海潜水調査船チタン合金耐圧殻の工作法に関する研究(第2報)
- 深海潜水調査船チタン合金耐圧殻の工作法に関する研究(第1報)
- 調質高張力鋼(HT 60級)受圧平板の疲労強度
- チタン合金球殻模型の圧壊強度研究 (第2報)
- 一様外圧を受ける耐圧補強円筒殻の全体圧壊強度に関する検討 : 第1報
- チタン合金球殻模型の圧壊強度研究
- 249 2相ステンレス鋼の肉盛溶接に関する研究
- 深海潜水調査船用浮力材 (完結)
- 深海潜水調査船用浮力材(第3報)
- 深海潜水調査船用浮力材 (第1報)
- 10Ni-8Co 高靭性超高張力鋼を用いた潜水調査船耐圧殼の電子ビーム溶接に関する研究(昭和 56 年度秋季全国大会論文発表講演討論記録)
- 2000m潜水調査船の外殻構造について
- 光通信を応用した大深度無人潜水機の開発
- 深海潜水調査船しんかい6500の運動性能について
- 潜水調査船"しんかい6500"の開発
- 深海潜水船耐圧球殻の実物大規模による熱処理法に関する実験的研究
- 10Ni-8Co 高靱性超高張力鋼を用いた潜水調査船耐圧殼の電子ビーム溶接に関する研究
- 電子ビーム溶接の深海潜水船耐圧殼への適応の研究
- 深海潜水調査船の耐圧殻の設計および製作
- 深海潜水調査船耐圧殼用高靭性高張力鋼の溶接に関する研究(第 2 報)(昭和 56 年度秋季全国大会論文発表講演討論記録)
- 深海潜水調査船耐圧殼用高靱性高張力鋼の溶接に関する研究(第 1 報)(昭和 56 年度春季全国大会論文発表講演討論記録)
- 深海潜水調査船耐圧殼用高靱性高張力鋼の溶接に関する研究(第 2 報)
- 深海潜水調査船耐圧殼用高靭性高張力鋼の溶接に関する研究(第 1 報)
- 日本船舶海洋工学会総会退任挨拶
- 第107期年度通常総会会長挨拶
- 日本造船学会長就任挨拶
- 人材育成について
- 潜水機種製品とその関連技術(技術解説) (船舶・海洋小特集)
- 全方向推力推進器の開発 (その1)
- 固有ひずみを用いた円筒構造物の溶接変形推定手法に関する研究
- 深海潜水調査船用浮力材 (第2報)
- 2000m潜水調査船のコニカルシートハッチふたについて
- 大深度潜水船用電力制御装置の開発 (第2報)
- 大深度潜水船用電力制御装置の開発 (第1報)
- 2000m潜水調査船の観測窓について
- 大深度潜水船用油漬配電機器の開発
- 2000m潜水調査船の推進操縦システムについて
- 潜水船の水中操縦性能試験について
- しんかい 2000 と鉄鋼材料
- 深海潜水調査船の耐圧殻の設計および製作〔含 討論〕
- 深海潜水調査船用チタン合金製耐圧容器
- 深海潜水調査機器
- 深海潜水訓練装置(深海潜水シミュレ-タ) (海洋開発小特集)
- 深海潜水調査船用チタン合金製耐圧球殻に関する研究 (海洋開発小特集)
- 深海潜水調査船チタン合金耐圧殻の工作法に関する研究
- 光通信を応用した大深度無人潜水機の開発 (環境技術小特集)
- 大深度用無人潜水機の光電力複合ケ-ブルの開発
- 2000m潜水調査船"しんかい2000" (海洋開発技術小特集)