薄肉構造の離散化極限解析(その5) : 軸圧縮荷重を受ける円筒殻の非軸対称塑性座屈モード

概要

論文の詳細を見る
The relation between radius-to-thickness ratios and non-axisymmetric plastic buckling patterns for axially compressed circular cylindrical shells was investigated from both analytical and experimental viewpoints. The obtained results are summarized as follows: (1) The lower bound value (R/t)_<e1> (eq. (6)) of the radius-to-thickness ratios which produce the non-axisymmetric buckling pattern with n circumferential waves was determined by applying the elastic buckling theory, and its validity was confirmed through comparison with the experimental data given by Horton et al. (2) Numerical calculations of non-axisymmetric buckling stresses were carried out by using the simulator with 9 degrees of freedom which was composed of 6 rigid elements idealizing the periodic unit area of Yoshimura buckle pattern, and the value of (R/t)_<p1gt; (Table l and Table 2) was obtained corresponding to the circumferential wave number n. (3) It was certified that the value of (R/t)_<pl> can be almost considered as the lower bound to each circumferential wave number by conducting the compression tests for mild steel circular cylinders (Fig.10), however, more experimental data will be needed in order to establish the above conclusion.
社団法人日本船舶海洋工学会の論文