Evaluation of Coronary Stents In Vitro With CT Angiography : Effect of Stent Diameter, Convolution Kernel, and Vessel Orientation to the Z-Axis

概要

論文の詳細を見る
Background The aims of the present study were to assess the effect of the stent diameter, convolution kernel, and vessel orientation to the z-axis on the evaluation of coronary stents, in vitro with computed tomography (CT) angiography. Methods and Results Seven vascular models (2 models without stenosis, 2 with obstruction, and 3 with stenosis) with an approximate inner diameter of 3 or 4mm, filled with contrast material (79 or 330HU) were scanned with a 16-detector CT. The diameter measurement of the stent lumen and stenosis evaluation were both done in an orientation parallel to the z-axis of the scanner using 4 convolution kernels. The measured diameters of the stented lumen were 47-57% and 36-45% smaller than the actual inner diameter of the 3- and 4-mm diameter models, respectively. The diameter measurement of the stent lumen and visualization of the in-stent stenosis were improved by using convolution kernels with higher spatial resolution. The in-stent artifacts were evaluated in 4 orientations (0°, 30°, 60°, 90°) to the z-axis. The artifact was the minimum in 0° to the z-axis, and the maximum in 90°. Conclusion Visualization of the lumen of a stent by CT is affected by its diameter, convolution kernel, and vessel orientation to the z-axis, and these factors should be taken into consideration in the stent evaluation.
社団法人日本循環器学会の論文
2005-08-20