Scoring in Spur Gear Pair : 1st Report, Scoring Temperature in Case of Gear Base Oil
スポンサーリンク
概要
- 論文の詳細を見る
The relation of the scoring occurrence to the temperature and the correlation between the gear test results and the two-cylinder test results were examined with a gear base oil using an IAE type high-speed spur gear test rig. In the mixed lubrication state, a scoring occurrence has intimate relation to the working flank bulk temperature which is not affected markedly by the sliding velocity and the oil-jet direction unlike the maximum contact surface temperature and the integral temperature. The scoring temperature of a spur gear pair can be estimated from the bulk temperatures just before seizures in two-cylinder tests taking the specific slidings and the sliding velocities at the beginning or the end of gear meshing into consideration.
- 一般社団法人日本機械学会の論文
著者
-
Fujii Masahiro
Faculty Of Engineering Okayama University
-
OBATA Fumio
School of Engineering, Okayama University
-
FUJITA Komei
School of Engineering, Okayama University
-
FUJII Masahiro
Nippon Kokan K.K.
-
MATSUO Kohei
Nippon Kokan K.K.
-
MATSUO Kosei
Kyodo Oil Technical Research Center Co., Ltd.
-
Obata F
Tottori Univ. Tottori Jpn
-
Fujita K
Honorary Professor Of Okayama University
-
Fujita Komei
School Of Engineering Okayama University
-
Obata Fumio
School Of Engineering Okayama University
関連論文
- Interference Detection Based on AIC Using EM Algorithm for UWB MB-OFDM Systems
- Effects of Tooth Profile on Scoring Behavior in Spur Gears
- Scoring in Spur Gear Pairs (2nd Report, Scoring Temperatures in Case of EP Oils) : Series C : Vibration, Control Engineering, Engineering for Industry
- Scoring in Spur Gear Pairs (Increase in Scoring Load Capacity Due to Tooth Profile Wear on the Approach Side) : Vibration, Control Engineering, Engineering for Industry
- Flach Temperature in Spur Gears : Series C : Vibration, Control Engineering, Engineering for Industry
- Bulk Temperature Rise of Working Tooth Flanks in Spur Gears : Vibration, Control Engineering, Engineering for Industry
- Effects of Load Intensity Fluctuation on Anti-seizure Capacities of Lubricating Oils : 2nd Report, Anti-seizure Capacity of Gear Base Oil at a High Specific Sliding
- Effects of Load Intensity Fluctuation on Anti-seizure Capacities of Lubricating Oils : 1st Report, States of Interference amonF Projections in Case of Gear Base Oil
- Temperature Rise of a Spur Gear Tooth Due to Repeated Action of a Moving Heat Source
- Scoring in Spur Gear Pair : 1st Report, Scoring Temperature in Case of Gear Base Oil
- Study on the Anti-seizure Capacities of EP Oils by Two Cylinder Test
- Study on Surface Durability of Laser-hardened Steel Roller
- Effect of Hardened Depth on Fatigue Strength of Carbonitrided Gears
- Effect of Standard Pressure Angle on the Fatigue Strength of Nitrided Gears
- Surface Durability of Tufftrided Steel Roller
- Effect of Roller Width on Surface Durability of Tufftrided Roller
- Effects of Radius of Curvature and Hardened Depth on Surface Durability of Induction-hardened SCM440 Steel Roller
- Study on Improving Method of Surface Durabilities of Steel Rollers by Surface-hardening : Comparison Between Tufftrided and Industrial Chromium Plated Rollers
- Energy Saving Type Lubricants and Surface Durabilities of Steel Rollers : 3rd Report, The Effect of the Quantity of Molybdenum Disulphide Dispersed in Oil in the Case of Thermally Refined S 45 C Steel Rollers : Vibration, Control Engineering, and Engineer
- Energy Saving Type Lubricants and Surface Durabilities of Steel Rollers : 2nd Report, The Effect of the Quantity of Molybdenum Disulphide Dispersed in Oil in the Case of Through Hardened SUJ2 Steel Rollers : Vibration, Control Engineering, and Engineering
- Effect of Hardened Depth on the Fatigue Strength of Nitrided Gears
- A Study on the Effect of Tooth Fatigue on the Dynamic Performance of a Gear Pair (In the Case of Nitrided Aluminium Chromium Molybdenum Steel Gears) : Vibration, Control Engineering, Engineering for Industry
- Effects of Hardened Depth and Relative Radius of Curvature on Surface Durability of a Nitrided SACM645 Steel Roller
- Surface Durability of Steel Rollers : In Relation to Hardness
- Effect of Case Depth on Fatigue Strength of Case-hardened Gear
- Study on the Effect of Tooth Fatigue on Dynamic Performance of Gear Pair : 2nd Report, In the Case of Case-hardened Chromium Molybdenum Steel Gears
- Study on the Effect of Tooth Fatigue on Dynamic Performance of Gear Pair : 1st Report In the case of induction-hardened Chromium Molybdenum Steel Gears
- Effects of Surface Roughness on the Seizure Limits of Lubricating Oils : 2nd Report, In the Case of EP Oils
- Effects of Lead and Sulfur Components on Surface Durability of Case-hardened Chromium Molybdenum Steel Roller
- Surface Durability and Surface Failure of Rolling Contact Roller Rotated at Non-uniform Velocity
- Effects of Load Intensity Fluctuation on Anti-Seizure Capacities of Lubricating Oils : 4th Report, Influence of Contact Width in Heavy Load Intensity Sector : Series C : Vibration, Control Engineering, Engineering for Industry
- Study on the Scoring Resistance of Lubricating Oil in Two Cylinder Test : 3rd Report, Seizure Behavior under Rolling-sliding Contact Condition and the Relation between Seizure and Temperature in Non-EP Gear Oil
- Effect of Specific Sliding on Surface Durability of Case-Hardened Chromium Molybdenum Steel Roller
- Energy Saving Type Lubricants and Surface Durabilities of Steel Rollers
- Effects of Load Intensity Fluctuation on Anti-Seizure Capacities of Lubricating Oils : 3rd Report, Temperature Rise of Rotating Cylinder Due to Rectangularly Fluctuating Heat Quantity
- Effects of Surface Roughness on the Seizure Limits of Lubricating Oils : 1st Report, In the Case of Non-additive Gear Oil