Study on the Anti-seizure Capacities of EP Oils by Two Cylinder Test
スポンサーリンク
概要
- 論文の詳細を見る
In this paper, to contribute to the establishment of a calculation method for load carrying capacity of a gear pair for scoring, the effects of specific sliding and sliding velocity on the anti-seizure capacities of EP oils were examined by two cylinder test. As the result, the following conclusions are deduced : (1) EP films formation is closely related to the lubrication states of frictional surfaces and chemical properties of EP additives. In mixed lubrication, EP films are formed only locally. (2) In EP oils also, seizure tends to occur in mixed lubrication and the anti-seizure capacities decrease as specific sliding and sliding velocity increase. (3) In the case when frictional surfaces are in boundary lubrication, the maximum contact surface temperature, and in the case when they are in mixed lubrication, the bulk temperature of outer surface of cylinder can be employed as the index temperatures for seizure respectively. However, these temperatures at seizure occurrence decrease as specific sliding increases.
著者
-
Yamaura Izumi
Matsushita Electric Industrial Co. Ltd.
-
MATSUO Kohei
Nippon Kokan K.K.
-
Obata F
Tottori Univ. Tottori Jpn
-
Fujita K
Honorary Professor Of Okayama University
-
Fujita Komei
School Of Engineering Okayama University
-
Obata Fumio
School Of Engineering Okayama University
関連論文
- Effects of Tooth Profile on Scoring Behavior in Spur Gears
- Scoring in Spur Gear Pairs (2nd Report, Scoring Temperatures in Case of EP Oils) : Series C : Vibration, Control Engineering, Engineering for Industry
- Scoring in Spur Gear Pairs (Increase in Scoring Load Capacity Due to Tooth Profile Wear on the Approach Side) : Vibration, Control Engineering, Engineering for Industry
- Flach Temperature in Spur Gears : Series C : Vibration, Control Engineering, Engineering for Industry
- Bulk Temperature Rise of Working Tooth Flanks in Spur Gears : Vibration, Control Engineering, Engineering for Industry
- Effects of Load Intensity Fluctuation on Anti-seizure Capacities of Lubricating Oils : 2nd Report, Anti-seizure Capacity of Gear Base Oil at a High Specific Sliding
- Effects of Load Intensity Fluctuation on Anti-seizure Capacities of Lubricating Oils : 1st Report, States of Interference amonF Projections in Case of Gear Base Oil
- Temperature Rise of a Spur Gear Tooth Due to Repeated Action of a Moving Heat Source
- Scoring in Spur Gear Pair : 1st Report, Scoring Temperature in Case of Gear Base Oil
- Study on the Anti-seizure Capacities of EP Oils by Two Cylinder Test
- Study on Surface Durability of Laser-hardened Steel Roller
- Effect of Hardened Depth on Fatigue Strength of Carbonitrided Gears
- Effect of Standard Pressure Angle on the Fatigue Strength of Nitrided Gears
- Surface Durability of Tufftrided Steel Roller
- Effect of Roller Width on Surface Durability of Tufftrided Roller
- Effects of Radius of Curvature and Hardened Depth on Surface Durability of Induction-hardened SCM440 Steel Roller
- Study on Improving Method of Surface Durabilities of Steel Rollers by Surface-hardening : Comparison Between Tufftrided and Industrial Chromium Plated Rollers
- Energy Saving Type Lubricants and Surface Durabilities of Steel Rollers : 3rd Report, The Effect of the Quantity of Molybdenum Disulphide Dispersed in Oil in the Case of Thermally Refined S 45 C Steel Rollers : Vibration, Control Engineering, and Engineer
- Energy Saving Type Lubricants and Surface Durabilities of Steel Rollers : 2nd Report, The Effect of the Quantity of Molybdenum Disulphide Dispersed in Oil in the Case of Through Hardened SUJ2 Steel Rollers : Vibration, Control Engineering, and Engineering
- Effect of Hardened Depth on the Fatigue Strength of Nitrided Gears
- A Study on the Effect of Tooth Fatigue on the Dynamic Performance of a Gear Pair (In the Case of Nitrided Aluminium Chromium Molybdenum Steel Gears) : Vibration, Control Engineering, Engineering for Industry
- Effects of Hardened Depth and Relative Radius of Curvature on Surface Durability of a Nitrided SACM645 Steel Roller
- Surface Durability of Steel Rollers : In Relation to Hardness
- Effect of Case Depth on Fatigue Strength of Case-hardened Gear
- Study on the Effect of Tooth Fatigue on Dynamic Performance of Gear Pair : 2nd Report, In the Case of Case-hardened Chromium Molybdenum Steel Gears
- Study on the Effect of Tooth Fatigue on Dynamic Performance of Gear Pair : 1st Report In the case of induction-hardened Chromium Molybdenum Steel Gears
- Effects of Surface Roughness on the Seizure Limits of Lubricating Oils : 2nd Report, In the Case of EP Oils
- Effects of Lead and Sulfur Components on Surface Durability of Case-hardened Chromium Molybdenum Steel Roller
- Surface Durability and Surface Failure of Rolling Contact Roller Rotated at Non-uniform Velocity
- Effects of Load Intensity Fluctuation on Anti-Seizure Capacities of Lubricating Oils : 4th Report, Influence of Contact Width in Heavy Load Intensity Sector : Series C : Vibration, Control Engineering, Engineering for Industry
- Study on the Scoring Resistance of Lubricating Oil in Two Cylinder Test : 3rd Report, Seizure Behavior under Rolling-sliding Contact Condition and the Relation between Seizure and Temperature in Non-EP Gear Oil
- Effect of Specific Sliding on Surface Durability of Case-Hardened Chromium Molybdenum Steel Roller
- Energy Saving Type Lubricants and Surface Durabilities of Steel Rollers
- Effects of Load Intensity Fluctuation on Anti-Seizure Capacities of Lubricating Oils : 3rd Report, Temperature Rise of Rotating Cylinder Due to Rectangularly Fluctuating Heat Quantity
- Effects of Surface Roughness on the Seizure Limits of Lubricating Oils : 1st Report, In the Case of Non-additive Gear Oil