Errors of an Indicator Due to a Connecting Passage
スポンサーリンク
概要
- 論文の詳細を見る
It is often compelled to attach an indicator passage to the pressure sensitive element in measuring the cylinder pressure of an internal combustion engine. A vibration caused in the passage, however, often injures the fidelity of pressure indicated. In this paper, the gas system inside the passage was firstly studied from the viewpoint of frequency-and transient-responses, and thus the relationship between the course of pressure in cylinder and the pressure indicated was derived. Then the amplitude error due to the passage was evaluated by comparing the pressure diagrams obtained by the use of a passage, with the accurate diagrams. From these, it was confirmed that a diagram available for practical use was possibly obtained by raising the period of vibration twice as much as the rising time of pressure and by making the period lower than 2 to 3 degrees in crank angle. Further, damping effects of connecting passage were experimentally examined for improving the diagram accuracy, and an approximate formula was given to find out the optimum damping.
- 一般社団法人日本機械学会の論文
著者
-
Nagao Fujio
Faculty Of Engineering Kyoto University
-
Ikegami Makoto
Faculty Of Engineering Kyoto University
関連論文
- Starting Aid by Inlet Throttling of Scavenging Pump in Two-Cycle Diesel Engine
- Air Motion and Combustion in a Swirl Chamber Type Diesel Engine
- Spray Process and Fuel Pyrolysis in the Initial Stage of Diesel Combustion
- An Investigation of Soot-and PAH-formation Based on Chemical Equilibrium
- A Study on Hydrogen-fueled Diesel Combustion
- A Radio-Frequency Resistance Thermometer
- Structure of a Flat Flame Stabilized by an Air Swirl
- Relation between Inlet Valve Closing Angle and Volumetric Efficiency of a Four-Stroke Engine
- Relation between Valve Angle-Area and Low Speed Performance of a Uniflow-Scavenged Engine
- Effect of the Induction Pipe in a Crankcase-Scavenged Two-Cycle Engine
- A Study on Combustion in Direct-Injection Diesel Engine (3rd Report) : (Crosssectional Observation of a Shallow-Dish Chamber)
- A Study on Combustion in Direct-Injection Diesel Engines : 1st Report, In the Case of Shallow-Dosh Chamber
- Analyses of the Diesel Combustion Process Based on Varying Delay Mechanism : Second Report, Effect of Pilot Injection
- A Study on Ignition and Combustion of a Diesel Spray by Means of a Rapid Compression Machine
- In-Cylinder Measurement of Turbulence Using a Laser Homodyne Method : Series B : Fluid Engineering, Heat Transfer, Combustion, Power, Thermophysical Properties
- Measurement of Turbulence by Laser Homodyne Technique
- Measurement of Air Flows by Means of Repetitive Spark Method
- Analyses of the Diesel Combustion Process Based on Varying Delay Mechanism : First Report, Theoretical Model and Its Verification
- A Study on Combustion in Direct-Injeciton Diesel Engines : 2nd Report, In the Case of Deep-Bowl Chamber
- Errors of an Indicator Due to a Connecting Passage
- Temperature Dependence of Carbon Deposit in a Diesel Combustion Chamber
- An Analysis of Diesel Flame by Picture Processing
- Measurement of Flows in Luminous Flames with Photoelectron Correlation Laser-Doppler Method
- An Analysis of Combustion Knock in a Diesel Engine
- Formation of Oxides of Nitrogen in a Diesel Engine : In the Case of Swirl Chamber Type
- A Stochastic Model of an Unsteady Turbulent Diffusion Flame in a Confined Space : 1st Report, Formulation of the Model and Its Nature
- A Stochastic Model of an Unsteady Turbulent Diffusion Flame in a Confined Space : 2nd Report, Application to Diesel Combustion
- Measurement of Particulates in Flames by Laser Homodyne Technique
- A Consideration on the Relation between Laminar Burning Velocity and Ignition Delay
- Valve Timing Control by a Hydraulic Tappet with a Leak Hole
- Measuring Error of Exhaust Smoke Density due to the Variations of Pressure and Smoke Density
- Application of Exhaust Gas Ejector to Engine Cooling
- The Effect of Combustion Swirl on the Combustion in a Diesel Engine
- Basic Design of Turbocharged Two-Cycle Diesel Engine
- Evaluation of the Capacity of the Auxiliary Blower Connected to a Constant-Pressure Turbocharged Two-Cycle Diesel Engine