Air Motion and Combustion in a Swirl Chamber Type Diesel Engine
スポンサーリンク
概要
- 論文の詳細を見る
According to the previous investigation on a swirl chamber type diesel engine, an earlier outflow of the fuel into the cylinder brings about favorable combustion. However, there appears a flameless region in the midst of the swirl chamber when the injection nozzle is so directed as to ensure the outflow action. In this paper, a better utilization of the air of this flameless area was aimed by controlling the air motion. Through comparison of engine performance together with observations of flow pattern and flame development, the following results were obtained : In the presence of a strong air swirl, the combustion is retarded owing to a poor mixture formation. A rather weakened swirl, which is realized by a proper selection of direction of the connecting passage or by slightly obstructing the stream, causes a better fuel distribution which assists the flaming in the central part of the chamber, thus resulting in an improvement in the engine performance.
- 一般社団法人日本機械学会の論文
著者
-
NAGAO Fujio
Faculty of Engineering, Kyoto University
-
Shinzato Takao
Instructor University Of Ryukyus.
-
Nagao Fujio
Faculty Of Engineering Kyoto University
-
Ikegami Makoto
Faculty Of Engineering Kyoto University
-
BANBA Toshio
Technical Official, Faculty of Engineering, Kyoto University.
-
Banba Toshio
Technical Official Faculty Of Engineering Kyoto University.
-
Ikegami Makoto
Faculty Of Engineering Kyoto University.
関連論文
- Starting Aid by Inlet Throttling of Scavenging Pump in Two-Cycle Diesel Engine
- Air Motion and Combustion in a Swirl Chamber Type Diesel Engine
- Spray Process and Fuel Pyrolysis in the Initial Stage of Diesel Combustion
- An Investigation of Soot-and PAH-formation Based on Chemical Equilibrium
- A Study on Hydrogen-fueled Diesel Combustion
- A Radio-Frequency Resistance Thermometer
- Structure of a Flat Flame Stabilized by an Air Swirl
- Relation between Inlet Valve Closing Angle and Volumetric Efficiency of a Four-Stroke Engine
- Relation between Valve Angle-Area and Low Speed Performance of a Uniflow-Scavenged Engine
- Effect of the Induction Pipe in a Crankcase-Scavenged Two-Cycle Engine
- A Study on Combustion in Direct-Injection Diesel Engine (3rd Report) : (Crosssectional Observation of a Shallow-Dish Chamber)
- A Study on Combustion in Direct-Injection Diesel Engines : 1st Report, In the Case of Shallow-Dosh Chamber
- Analyses of the Diesel Combustion Process Based on Varying Delay Mechanism : Second Report, Effect of Pilot Injection
- A Study on Ignition and Combustion of a Diesel Spray by Means of a Rapid Compression Machine
- In-Cylinder Measurement of Turbulence Using a Laser Homodyne Method : Series B : Fluid Engineering, Heat Transfer, Combustion, Power, Thermophysical Properties
- Measurement of Turbulence by Laser Homodyne Technique
- Measurement of Air Flows by Means of Repetitive Spark Method
- Analyses of the Diesel Combustion Process Based on Varying Delay Mechanism : First Report, Theoretical Model and Its Verification
- A Study on Combustion in Direct-Injeciton Diesel Engines : 2nd Report, In the Case of Deep-Bowl Chamber
- Errors of an Indicator Due to a Connecting Passage
- Temperature Dependence of Carbon Deposit in a Diesel Combustion Chamber
- An Analysis of Diesel Flame by Picture Processing
- Measurement of Flows in Luminous Flames with Photoelectron Correlation Laser-Doppler Method
- An Analysis of Combustion Knock in a Diesel Engine
- Formation of Oxides of Nitrogen in a Diesel Engine : In the Case of Swirl Chamber Type
- A Stochastic Model of an Unsteady Turbulent Diffusion Flame in a Confined Space : 1st Report, Formulation of the Model and Its Nature
- A Stochastic Model of an Unsteady Turbulent Diffusion Flame in a Confined Space : 2nd Report, Application to Diesel Combustion
- Measurement of Particulates in Flames by Laser Homodyne Technique
- A Consideration on the Relation between Laminar Burning Velocity and Ignition Delay
- Valve Timing Control by a Hydraulic Tappet with a Leak Hole
- Measuring Error of Exhaust Smoke Density due to the Variations of Pressure and Smoke Density
- Application of Exhaust Gas Ejector to Engine Cooling
- The Effect of Combustion Swirl on the Combustion in a Diesel Engine
- Basic Design of Turbocharged Two-Cycle Diesel Engine
- Evaluation of the Capacity of the Auxiliary Blower Connected to a Constant-Pressure Turbocharged Two-Cycle Diesel Engine