Evaluation of the Capacity of the Auxiliary Blower Connected to a Constant-Pressure Turbocharged Two-Cycle Diesel Engine
スポンサーリンク
概要
- 論文の詳細を見る
For pressure-charging two-cycle Diesel engines with the constant pressure system, selfsustained operation of the turbocharger cannot be achieved owing to the low efficiency of the turbocharger, in which case some aid must be furnished to the turbocharger. One form of aiding the turbocharger is to attach a positive displacement blower or compressor to the engine. In this paper, by applying the same method of calculation of the variables to the performance of the turbocharged two-cycle Diesel engine as presented in the previous paper, the capacities of the auxiliary blower in series are calculated to meet reliably the given operating conditions at full load and the stable operation at idle running. Further, the effects of the blower capacity on the performance of a given engine are made clear by the same process. The results of this study are favourably comparable with those of experiment on a practical engine now in operation.
- 一般社団法人日本機械学会の論文
著者
-
Nagao Fujio
Faculty Of Engineering Kyoto University
-
Hirako Yoshio
Faculty Of Engineering Osaka Industrial University
-
Hirako Yoshio
Faculty Of Engineering Industrial University
関連論文
- Starting Aid by Inlet Throttling of Scavenging Pump in Two-Cycle Diesel Engine
- Air Motion and Combustion in a Swirl Chamber Type Diesel Engine
- A Radio-Frequency Resistance Thermometer
- Relation between Inlet Valve Closing Angle and Volumetric Efficiency of a Four-Stroke Engine
- Relation between Valve Angle-Area and Low Speed Performance of a Uniflow-Scavenged Engine
- Effect of the Induction Pipe in a Crankcase-Scavenged Two-Cycle Engine
- A Study on Combustion in Direct-Injection Diesel Engines : 1st Report, In the Case of Shallow-Dosh Chamber
- A Study on Combustion in Direct-Injeciton Diesel Engines : 2nd Report, In the Case of Deep-Bowl Chamber
- Errors of an Indicator Due to a Connecting Passage
- Temperature Dependence of Carbon Deposit in a Diesel Combustion Chamber
- Computation of NO Levels for Various Operations in SI Engines
- Combustion Process in a Divided Chamber Spark Ignition Engine
- Combustion Process of Torch-Ignited Nonhomogeneous Mixtures : An Experiment with a Constant Volume Bomb
- An Analysis of Combustion Knock in a Diesel Engine
- Valve Timing Control by a Hydraulic Tappet with a Leak Hole
- Measuring Error of Exhaust Smoke Density due to the Variations of Pressure and Smoke Density
- Application of Exhaust Gas Ejector to Engine Cooling
- The Effect of Combustion Swirl on the Combustion in a Diesel Engine
- Basic Design of Turbocharged Two-Cycle Diesel Engine
- Evaluation of the Capacity of the Auxiliary Blower Connected to a Constant-Pressure Turbocharged Two-Cycle Diesel Engine