Effect of Oil Environment on Characteristics of Fatigue Crack Growth of Age-Hardened Al-Alloy : Series A : Solid-Mechanics Strength of Materials

スポンサーリンク

概要

著者

関連論文

Effect of Mean Stress on Fatigue Srength, Crack Strength and Notch Radius at Branch Point in Axial Fatigue of 7:3 Brass
Crack Propagation in Low Cycle Fatigue of 7 : 3 Brass Specimens under Reversed Bending
Observation of Local Deformation and Crack Initiation in High-Cycle Torsional Fatigue of Carbon Steel Plain Specimen by Electron Microscope
Elastic Parameters Influencing Stress Fields in Multiphase Composite
Analysis of Elastodynamic Problems Based on the Principle of Superposition : Extension of the Body Force Method to Elastodynamic Problems
Considerations of the Small-Crack Growth Law Based on COD : Low-Cycle Bending Fatigue Test of an Annealed 0.45%C Steel in the SEM
Fatigue Damage of Heat-Treated 0.45%C Steel Smooth Specimens Under Two-Step Loading
Statistical Property in the Initiation and Propagation of Microcracks of a Heat-Treated 0.45% C Steel
Effect of Oil Viscosity on the Fatigue Limit of Drilled Specimens and the Small Crack Growth Law
Semi-Infinite Body with a Revolutional Pit Under Tension
Semi-Infinite Body with a Semi-Ellipsoidal Pit under Tension
Mode I and II Singular Stress Fields near a Corner of Jointed Dissimilar Materials
Transverse Bending of Rectangular Plates with Single- or Double-Edge Cracks
Anisotropy of Low-Cycle Torsional and Push-Pull Fatigue in a Rolled Steel
Some Consideration on the Anisotropy of Fatigue Limit in a Rolled Steel Plate, Based on the Observation of Fatigue Process in Electropolished Specimens
Anisotropy of the Fatigue Limit and of the Crack Propagation Property of a Rolled Steel Plate
The Effect of Tensile Prestrain on the Fatigue Strength of Strength-Anisotropic Rolled Steel
Effect of Heat Treatment on Anisotropy of Fatigue Strength of a Rolled Steel
Influence of Mean Stress on Crack Closure Phenomenon and Fatigue Crack Propagation
Characteristics of Surface Crack Growth in Rotating Bending Tests of Age-hardened or Annealed Al-alloy
Fatigue Damage of Electropolished Carbon Steel Specimens with a Shallow Groove under Two Stress Levels
Tension of an Infinite Elastic Body Having an Infinite Row of Spheroidal Cavities
Rotary Bending Tests of Steel Specimens Having a Shallow but Sharp Circumferential Groove
Effects of Size on the Fatigue Limit and the Branch Point in Rotary Bending Tests of Carbon Steel Specimens
On the Tension of an Infinite Plate Containing an Infinite Row of Elliptic Holes
Effect of Microstructure on the Characteristics of Small Fatigue Crack Growth in Dual-Phase Steels
Minimum Fatigue Crack Length for the Application of Small-Crack Growth Law
Fatigue Limit of Welded High Strength Steel and its Improvement Due to TIG Treatment : An Examination Based on Non-Propagating Phenomena of Crack
Estimation of Crack Propagating Property by the Rotating Bending Fatigue Tests of Specimens with a Small Hole
Analysis of Plasticity Induced Crack Closure by the Extended Body Force Method : Comparison of Various Analytical Results Based on Dugdale Model : Series A : Solid-Mechanics, Strength of Materials
Improvement of the Accuracy in BEM or FEM Based on the Similarity of Stress Fields Near Notch Roots
Singular Stress Field near a Corner of Jointed Dissimilar Materials under Antiplane Loads
Analysis of Plasticity-Induced Crack Closure by the Extended Body Force Method : (Comparison of Various Analytical Results Based on Dugdale Hypothesis)
Slip Deformation and Low-Cycle Fatigue Damage of an Aluminium Alloy
Effect of Overstress on the Fatigue Behavior of a Heat-treated 0.54% C Steel under the Stress of Fatigue Limit
Fracture Criterion of Notched Plates of FRP
An Examination of the Notch Effect in Fatigue of Carbon Steels Based on Linear Notch Mechanics
Torsional Fatigue and Bending Fatigue of Electropolished Low Carbon Steel Specimens
Tensile Fracture Criterion of High Strength Steel Specimens with a Circumferential Notch : Solid-Mechanics, Strength of Materials
Effect of Oil Environment on Characteristics of Fatigue Crack Growth of Age-Hardened Al-Alloy : Series A : Solid-Mechanics Strength of Materials
The Effect of Overstress on the Non-Propagating Crack Formed in a Specimen with a Small Hole : Series A : Solid-Mechanics, Strength of Materials
Analysis of the Delaying Effects of Overloads on Fatigue Crack Propagation by the Body Force Method : Series A : Solid-Mechanics, Strength of Materials
Correlation between the Existence of Fatigue Limit and Non-Propagating Micro-Crack
Bending or Torsional Fatigue of Notched Specimen with a Small Hole at the Notch Root
Notch Effect in Low-Cycle Fatigue : 2nd Report : Effect of Stress Change and Mean Stress
Comparison of Fatigue Processes in 0.45%C Steel Specimens Polished under Different Conditions
Small Fatigue Crack Initiation and Propagation of Annealed 0.42% C Steel in Oil : Solid-Mechanics, Strength of Materials
Method of Approximate Calculation for Interference of Notch Effects and Its Application

もっと見る

スポンサーリンク