四点せん断試験による一方向GFRPの面内モードII破壊じん性評価 : 試験法の検討と予き裂長さ依存症

概要

論文の詳細を見る
In-plane Mode II fracture toughness tests on unidirectional GFRP are conducted using a four-point shear loading test method.In the previous paper,the four-point shear loading test method was examined as a simple Model II fracture toughness test.Then the effect of pre-crack length on fracture toughness was investigated.In this study,the same test method is applied to evaluate the Mode II fracture toughness.The dependence of the pre-crack length and the initial failure process are clarified.The results obtained are summaruzed as follows;(1) It is revealed that the crack opening displacement is much less than the crack relative sliding displacement in the four-point shear loading test.(2) From an analysis of the damage propagation length,it is found that the initiation of the main crack is close to the maximum load point.The initial failure behavior of the unidirectional GFRP subjected to shear loading is clarified.(3) The normalized stress intensity factor concerning an orthotropic body of the unidirectional FGRP is calculated by a finite element method.The mode II fracture toughness is constant irrespective of the pre-crack length.
社団法人日本材料学会の論文
1993-07-15