透過X線回折法による金属の疲労破壊に関する研究(I)
スポンサーリンク
概要
- 論文の詳細を見る
As one of the X-ray studies of fatigued metals, the author adopted the transmission X-ray diffraction method in this study. Specimens of pure aluminum poly-crystals which were com-pletely annealed were used, and they were fatigued by cyclic tension and compression strainings with a small fatigue test machine which was designed by the author. The test pieces were of the size of about 0.5mm in thickness, 2-5 mm in length and 6 mm in width at the smallest section. For most of those fatigue tests, the strain amplitudes were considerably large, which could not be measured, then the fatigue lives were about 104 cycles. The surface of the fatigued specimen was observed at times with an optical microscope, which could be directed and adjusted in three dimensional bearings. It was noticeable that most of the fatigue cracks occurred at grain boundaries. In process of the fatigue test, the transmission X-ray diffractions of that specimen were exposed on a Laue camera. The X-ray source was of cobalt target, and the electron beam was 30 kV and 8 mA. A slit of 0.5 mm in diameter was used for the X-ray beam, The asterisms of the diffraction patterns were measured statistically, and it was confirmed that the asterisms increased with increase in the number of strain cycles. It seemed that there were correlations between the asterisms and the fatigue damage, though no clear conclusion could be deduced. The fatigued specimens were further thinned by electrolytically polishing until about 0.I mm in thickness. In the transmission X-ray diffraction of the thinned specimen, it was clarified that the diffracted spots were isolated to fine spots which were elongated; and at the same time. the diffraction rings by the characteristic X-ray, CoKα, appeared. Since those diffractions were constructed of groups of many fine spots, it seems that the substructure or poly-crystallization developed in the grains of those specimens. An experiment was also performed of a specimen which was subjected first to tension of over 10% strain. It was then subjected to cyclic straining of small amplitude in tension and compres-sion. Comparative study was made of the X-ray diffraction patterns (a) as the specimen was cyclically strained and (b) as it was statically strained. It was clarified that the diffractions of the statically strained specimen were completely broadened, and these broadened diffractions decreased as the result of cyclic straining. This phenomenon implies that microplasticstrains by the static straining in the grain differ from those by the cyclic straining.
- 社団法人日本材料学会の論文
- 1970-12-15
著者
関連論文
- 鋭敏化オーステナイト・ステンレス鋼の応力腐食割れ : 塑性誘起相変態の効果
- 215 材料特性検出のための磁化過程の応用 : バルクハウゼン効果雑音の応用(機械的性質)
- 高アルミナ室セラミックスの破壊面とアコースティックエミッション
- 319 セラミックスの破面とアコースティック・エミッション(セラミックス・ガラス)
- 136 疲労破壊におけるアコースティックエミッションの観測
- 炭素鋼の長寿命プログラム疲労に対する寿命の推定
- 疲労過程を考慮した場合の実働荷重疲労強度の推定
- 疲労過程を考慮した場合の実働荷重疲労強度の推定
- 電子顕微鏡による金属の疲労破面の観察
- 実働荷重下の金属の疲れ強さ : 実働応力波形による疲れ試験
- 透過ラウエ法によるアルミニウムの変形の研究
- 福井県における積雪深分布の一次近似
- 焼なまし純アルミニウムの疲労粒界き裂の生成
- 2-13 アルミニウム双結晶粒界付近の変形
- 107 疲労寿命への荷重繰返し速さの影響(疲労特性)
- 軟鋼の2段多重変動荷重疲労における低応力繰返しの効果
- アルミニウムの疲労き裂先端の塑性ひずみ分布
- (1-18) 純アルミニウムの粒界疲労き裂の生成
- 透過X線回折法による金属の疲労破壊に関する研究(I)
- 実働荷重における金属の疲れ破面