平面ひずみ圧縮塑性変形に伴う銅の微視的表面形状変化(<特集>塑性工学)

概要

論文の詳細を見る
The free surface of polycrystalline metal becomes roughened in metal forming process due to its microscopic inhomogeneity. In the present study, two-dimensional surface roughness and three-dimensional microscopic shapes of the roughened surface of pure copper caused by compressive plastic deformation under a plane strain condition were investigated, and the characteristics of the microscopic deformation behavior during plane strain compression were clarified in comparison with those during uniaxial compression. It was found that the surface roughness increased almost in proportion to the applied strain, but the roughness measured in the compressive direction was larger than that in the transverse direction. This is because the mountains which appear on the free surface during plane strain compression tend to elongate in the transverse direction. The primary wavelength of the surface shape was also obtained by means of the maximum entropy method. The primary wavelength in the transverse direction was almost twenty times of the average grain size, and it decreased in correspondence with the applied strain. This implies that the inhomogeneity of deformation behavior of copper appears under the scale of twenty grains in the transverse direction.
1997-08-15