短繊維強化ポリエーテルエーテルケトンの引張疲労特性に及ぼす平均応力の影響(<特集>疲労)

概要

論文の詳細を見る
In order to characterize the fatigue strength of injection moulding advanced thermopastic, such as Polyetheretherketon(PEEK), short glass fiber reinforced PEEK(GF/PEEK)and short carbon fiber reinforced PEEK(CF/PEEK), the fatigue tests were conducted under tension-tension cylic loading(stress ratio, R=0.1〜0.7)at23±1°C, 50±5% RH. The effects of repeated stress amplitude, mean stress, characteristic of matrix and the kind of reinforced short fibers on the fatigue strength were investigated on the basis of the fractographic examination of fatigue fracture surface. The results are summarized as follows.(1)The influence of repeated stress amplitude and mean stress on the fatigue characteristic of PEEK series were revealed.(2)It was found that the effect of short fiber reinforcement on the fatigue strength characteristic is not high, the same as that on the static strength of PEEK series.(3)The short fiber reinforcement of those materials was also discussed on the basis of fractographic examination.
社団法人日本材料学会の論文
1997-10-15