構成モデルで表したセラミックス圧粉体の微細構造と焼結特性
スポンサーリンク
概要
- 論文の詳細を見る
The effect of forming pressure on the internal structure and the sintering behavior of green compacts made from ceramic granules was investigated with the aim of describing those by a constitutive model. Alumina granules were compacted by cold isostatic pressing (CIP) at three different pressures of 98, 196 and 294 MPa. Examined were the initial pore structure, shrinkage and densification of the granular compacts during sintering at four temperatures in the range between 1100 and 1400℃. Three distinct regions in the microstructure with fractured, unfractured granules and crack-like cavities were identified as the three peaks observed in the pore size distribution. The ratio of the respective pore volumes in these three regions was independent of the forming pressure within the range under examination, while the pore size decreased as the pressure increased. The sintering rate of the compacts formed at 98 MPa was similar to that at higher pressures, because the dominant process responsible for the densification during sintering is the shrinkage of small pores in a dense region. However, the final density after sintering of the compacts formed at 98 MPa was somewhat lower than that of the compacts formed at higher pressures. This stems from large crack-like pores around the unfractured granules remained even at 1400℃. The shrinkage behavior was modelled with a set of constitutive equations by taking account of the pore size distribution of granular compacts. The sintering behavior related to the forming pressure could be well described by the present model.
- 社団法人日本セラミックス協会の論文
- 2000-01-01
著者
関連論文
- 鉄切削屑と使用済みアルミニウム缶から燃焼合成したFe-Al系金属間化合物合金の機械的性質
- ケイ石廃泥,消石灰を原料にしたケイ酸カルシウム硬化体のコロイダルシリカ添加による軽量化
- ケイ石廃泥, 消石灰を原料としたケイ酸カルシウム硬化体の水熱合成およびその物質性(アルカリの影響)
- 傾斜機能材料の焼結変形の制御と解析
- 215 金属・セラミックス接合体の曲げ強度(機械材料・材料加工V)
- 306 リサイクル金属素材を利用した衝撃吸収材の衝撃特性(GS 機械材料・工作・生産システム(その1))
- 廃ガラス粉末を利用したフォーム製品の発泡成形解析
- 2121 パルス通電焼結法による鉄系研削屑のリサイクルに関する研究(S23-3 グリーンコンポジットの機械的性質(2),天然繊維,リサイクル,S23 グリーンコンポジットの最前線)
- 粉末の成形加工
- 材料の塑性(I)鉄鋼
- 粉末成形体の焼結における構成式
- 焼結過程の有限要素シミュレーション : 第2報,焼結の構成式と焼結体形状予測
- 焼結過程の有限要素シミュレーション : 第1報,粉末成形体のミクロモデルと焼結速度式
- 鉄鋼材料の組織・材質予測と塑性加工シミュレーション
- Fe系研削スラッジとAl缶粉砕粉より作製したFeAlの機械的特性
- 952 廃金属を用いて作製した鉄アルミナイドの機械的性質
- 630 廃金属から合成した鉄アルミナイドとその耐食性
- 鉄系研削スラッジとアルミニウム缶の粉砕粉末の鉄アルミナイド反応合成
- 機械的方法による鋼へのアルミニウムプレーティング
- 213 研削加工屑を利用した FRP の試作とその特性評価
- 研削スラッジのリサイクルに関する研究 : スラッジ・樹脂複合材料の特性評価
- 構成モデルで表したセラミックス圧粉体の微細構造と焼結特性
- 323 石英-石灰系水熱反応に及ぼす各種アルカリの影響と珪酸カルシウム水和物の諸性質(セメント・コンクリート)
- 非金属基複合材料の高エネルギ密度ビームによる表面改質・加工 (フォーラム「高エネルギプロセッシング・加工面評価技術 : 中立研究機関の地域における役割」)
- 石炭灰の前処理が水熱処理ケイ酸カルシウム硬化体の強度に及ぼす影響(高圧力下の溶液)
- 128 解析に基づく傾斜機能材料における焼結クラックの抑制(OS 粉末加工(1))
- 225 焼結中の粉末積層材の内部応力に及ぼす単軸加圧の効果
- 620 焼結中の傾斜機能材料におけるクラック発生(ワークショップ 粉末成形・焼結の最前線)
- 傾斜機能材料の焼結過程の有限要素解析
- 造粒粉による内部構造を持つセラミックス圧粉体の焼結構成モデル
- ケイ石,石灰の粗原料を利用したケイ酸カルシウム水和物の水熱合成と諸性質