ダイヤモンド砥石のツルーイング及びドレッシングに関する研究(第1報) : ステレォ写真法による砥粒突出し量の測定と研削性能に及熔す砥粒突出し量の影響

概要

論文の詳細を見る
The protrusion height of abrasive grains in a metal bonded diamond wheel plays an important role in grinding performance. For example, the protrusion height too small causes loading easily and an increase of grinding force markedly, but the too large one causes attritious wear and releasing of cutting edges frequently. However the precise measuring method adapted to the protrusion height has not been developed. In this paper, a new 3-dimensional measuring technique [3 D method] is developed by using SEM stereo pairs. And then the effect of the protrusion height in a diamond wheel which is trued and dressed with a GC cup-truer is investigated experimentally on grinding performance of Si_3N_4 ceramics. The main results obtained are as follows : (1) After truing and dressing, abrasive grains protrude above the flat base of metal bond and are followed with bond-tails, the protrusion height approximates to a normal distribution. (2) Grinding force grows monotonously with an increase of grinding passes. (3) The optimum protrusion height is discussed by means of variations of grinding force, finished surface roughness and wheel wear with an increase of primary protrusion height.
社団法人精密工学会の論文
1989-05-05