Influence of Si Addition to the Coating Bath on the Growth of the Al-Fe Alloy Layer in Hot-dip Zn-Al-Mg Alloy-coated Steel Sheets

スポンサーリンク

概要

論文の詳細を見る
2011-11-15

著者

関連論文

Comparison of the Dislocation Density in Martensitic Steels Evaluated by Some X-ray Diffraction Methods
Cold Model Experiment on Infiltration of Mould Flux in Continuous Casting of Steel : Simulation of Mould Oscillation
Cold Model Experiment on Infiltration of Mould Flux in Continuous Casting of Steel : Simple Analysis Neglecting Mould Oscillation
Effect of Cooling Rate on Composition of Oxides Precipitated during Solidification of Steels
Deep Drawability of Electro-deposited Pure Iron Having an Extremely Sharp //ND Texture
Nucleation of the Primary Al Phase on TiAl_3 during Solidification in Hot-Dip Zn-11%Al-3%Mg-0.2%Si-Coated Steel Sheet
Solidification Structure of the Coating Layer on Hot-Dip Zn-11%Al-3%Mg-0.2%Si-Coated Steel Sheet
The Effect of S and Mn on the High-temperature Oxidation and Scale Spallation Behavior of Low-carbon Steels
Analysis of Flange Wrinkle in Square-shell Deep Drawing of Anisotropic Sheet
Evolution of Dislocation Structure and Fatigue Crack Behavior in Fe-Si Alloys during Cyclic Bending Test
A Proposal for Evaluation Method of Energy Parameter Values in Cell Model for Thermodynamics of Refining Slag
Mechanism of a Hydrogen-induced Sticker Breakout in Continuous Casting of Steel : Influence of Hydroxyl Ions in Mould Flux on Heat Transfer and Lubrication in the Continuous Casting Mould
Cold-rolling and Recrystallization Texture Formation in Electro-deposited Pure lron with a Sharp and Homoqeneous γ-fiber
Comparison of the Dislocation Density in Martensitic Steels Evaluated by Some X-ray Diffraction Methods
Development of Thermodynamic Model for Steelmaking Slags and Its Application to Analyses of Steelmaking Process
Ostwald growth of Fe_3C and Distributions of Carbon Atoms in α-iron Annealed Under a Constant Temperature Gradient
Role of TiAl_3 Fine Precipitate in Nucleation of the Primary Al Dendrite Phase during Solidification in Hot-Dip Zn-11%Al-3%Mg-0.2%Si Coated Steel Sheet
Mathematical Modelling of Change in Composition of Mold Flux in Continuous Casting of Steels
Infiltration Phenomena of Molten Powder in Continuous Casting Derived from Analysis Using Reynolds Equation Part 2 : Unsteady Analysis
Infiltration Phenomena of Molten Powder in Continuous Casting Derived from Analysis Using Reynolds Equation Part 1 : Steady Analysis
Heat of Transfer for Carbon in Iron-Carbon System
Blistering Behavior during Oxide Scale Formation on Steel Surface
The Increase in a Brittle-to-ductile Transition Temperature in Fe-Al Single Crystals
Influence of Si Addition to the Coating Bath on the Growth of the Al-Fe Alloy Layer in Hot-dip Zn-Al-Mg Alloy-coated Steel Sheets
Role of Hematite Formation on Blister Generation during High Temperature Oxidation of Steel
Effect of Carbide Size Distribution on the Impact Toughness of Tempered Martensitic Steels with Two Different Prior Austenite Grain Sizes Evaluated by Instrumented Charpy Test
Behavior of High-Temperature Embrittlement and Its Mechaism in Heat-Affected Zone of Low-Carbon Alloy Steels

もっと見る

スポンサーリンク