Chemical Reaction of Glazed Refractory with Al-deoxidized and Ca-treated Molten Steel
スポンサーリンク
概要
- 論文の詳細を見る
The influence of a high alumina refractory, glazed by the typical CaO–MgO–Al2O3–SiO2 ladle slag, on the generation of non-metallic inclusions in Al-deoxidized and Ca-treated molten steel was investigated at 1600°C. The variations of microstructure and chemistry of the glazed refractory were investigated with reaction time. Significant chemical reaction of the glazed refractory was observed due to the infiltration of liquid glaze into porous spinel matrix region in the refractory. Various non-metallic inclusions of the CaO–MgO–Al2O3–CaS system were generated in molten steel. The major inclusions were liquid Ca–Al–Mg–O–S inclusion and its mixtures with solid phase such as CaS, MgO and MgAl2O4. Thermodynamic analysis using the FactSage software was also carried out to understand the chemical reactions of the glazed refractory with molten steel more clearly.
- 2010-10-15
著者
-
Jung S‐m
Pohang Univ. Sci. And Technol. Pohang Kor
-
Jung Sung-mo
Photomask R&d Center
-
Lee Hae-geon
Graduate Inst. Of Ferrous Technol. (gift) Pohang Univ. Of Sci. And Technol. (postech)
-
Jung Sung-mo
Graduate Inst. Of Ferrous Technol. (gift) Pohang Univ. Of Sci. And Technol. (postech)
-
Son Jung-hwan
Steelmaking Division Posco
-
Jung In-ho
Dep. Of Mining And Materials Engineering Mcgill Univ.
-
Jung In-ho
Department Of Mining And Materials Engineering Mcgill University
-
Gaye Henri
Graduate Inst. Of Ferrous Technol. (gift) Pohang Univ. Of Sci. And Technol. (postech)
関連論文
- Dissolution Kinetics of Alumina into Mold Fluxes for Continuous Steel Casting
- Experimental Study of Phase Equilibria in the MnO-"TiO_2"-"Ti_2O_3" System
- Thermodynamic Study on Redox Equilibrium of Manganese in CaO-SiO_2-Mn_tO-MgO_
- Equilibria of Manganese and Sulfur between Liquid Iron and CaO-SiO_2-Fe_tO-MgO-MnO Slags Saturated with 2CaO・SiO_2 and MgO
- Thermodynamic Properties of Manganese Oxide in BOF Slags
- Dry-Etching Characteristics of Attenuated Phase-Shifting Masks using C1_2/CF_4/O_2/He Plasmas
- Experimental Investigations of Phase Equilibria of MnS Containing Sub-systems in the MnO-SiO_2-Al_2O_3-MnS System
- Quantitative Chemical Analysis of Fluorine in the Slags Produced in Stainless Argon-Oxygen Decarburization Process by X-ray Fluorescence Spectrometry
- Viscosity of Highly Basic Slags
- Kinetic Study on Surface Dissolution of Nitrogen on Liquid Steel by Isotope Exchange Technique
- Chemical Reaction of Glazed Refractory with Al-deoxidized Molten Steel
- A CFD-based Nucleation-growth-removal Model for Inclusion Behavior in a Gas-agitated Ladle during Molten Steel Deoxidation
- Simulation Test for Crystallization of Inclusions in Semi-killed Steels during Heat Treatment Prior to Hot Rolling
- Solubility of MgO in CaO-SiO_2-MnO Slags
- Solubility of MgO in New Ironmaking Process-typed Slags
- Activity Coefficient of Manganese in Copper
- Thermodynamic Analysis of Mn-depleted Zone Near Ti Oxide Inclusions for Intragranular Nucleation of Ferrite in Steel
- Thermodynamics of Titanium Oxide in Ladle Slags
- Chemical Analysis of Zinc Electroplating Solutions by X-ray Fluorescence Spectrometry
- Chemical Reaction of Glazed Refractory with Al-deoxidized and Ca-treated Molten Steel
- Formation of Calcium Ferrites under Controlled Oxygen Potentials at 1273K
- Reassessment of C+O=CO (g) Equilibration
- Fabrication of Ultra High Nitrogen Austenitic Stainless Steel by NH_3 Solution Nitriding
- Thermodynamic Modeling of the Al_2O_3-Ti_2O_3-TiO_2 System and Its Applications to the Fe-Al-Ti-O Inclusion Diagram
- Carbonation Reaction of CaO in Jet Milling of CO_2 Gas
- The effect of Fe_tO Content on MgO Solubilities in Lime-based Slags
- Experimental Study of Phase Equilibria in the MnO-SiO_2-"TiO_2"-"Ti_2O_3" System
- Water Model and CFD Studies of Bubble Dispersion and Inclusions Removal in Continuous Casting Mold of Steel
- Grain Refinement of α-iron by Repeated Carburizing and Decarburizing Reactions
- Numerical Analysis of Surface Tension Gradient Effect on the Behavior of Gas Bubbles at the Solid/Liquid Interface of Steel
- Inclusion Population Evolution in Ti-alloyed Al-killed Steel during Secondary Steelmaking Process
- Data Arrangement and Consideration of Evaluation Standard for Silico-Ferrite of Calcium and Alminum (SFCA) Phase in Sintering Process
- Phase Diagram Study of the CaO–CaF2 System
- Thermodynamics of the MnO–FeO–MnS–FeS–SiO2 System at SiO2 Saturation under Reducing Condition: Immiscibility in the Liquid Phase
- Morphologies of Alumina Nano- and Microparticles at the Fe/Al2O3 Interface and the Effects of Reaction Time and Substrate Roughness on Size Distribution
- A Kinetic Study on Carburization of Fe by Using 13CO Isotope Gas
- Corrosion of Nozzle Refractories by Liquid Inclusion in High Oxygen Steels
- Effect of Intercritical Heat Treatment on the Microstructure and Mechanical Properties of Medium Mn Steels
- Evolution of Non-Metallic Inclusions in Secondary Steelmaking: Learning from Inclusion Size Distributions
- Numerical Analysis of Surface Tension Gradient Effect on the Behavior of Gas Bubbles at the Solid/Liquid Interface of Steel
- Enhanced Carburization of Iron by CH4-containing Gas at 1573 K
- Metal-slag Separation Behaviors of Pellets Consisted of Iron, Graphite and CaO–Al2O3 Based Slag Powders