Carbide Dispersion Carburizing (CDC) of Fe-Mo-V Based High-speed Steels
スポンサーリンク
概要
- 論文の詳細を見る
The carbide dispersion carburizing process was applied to Fe-based high-speed steels, which contained multiple carbide-forming elements, Mo and V. Fine carbides precipitated during the carburization and the dispersed particles in the Fe–Mo–V–C alloys heat-treated at 1 200°C were identified as VC, (Mo, V)2C, and (Fe ,Mo)6C, which behave as effective inhibitors against the grain growth of austenite and as reinforcers resulting in increased hardness of the martensitic matrix. The maximum Vickers hardness of the Fe–10Mo–5V–2.05C alloy quenched from 1 200°C and tempered at 600°C achieved values of 1 100 and 1 000, respectively. Thermodynamic calculation of the Fe–Mo–V–C quaternary system proved to be useful for optimizing the composition of carbide forming elements, the carburizing conditions, and the microstructure of carburized and solution-treated alloys.
- 社団法人 日本鉄鋼協会の論文
- 2006-02-15
著者
-
Ishida Kiyohito
Department of Materials Science, Graduate School of Engineering, Tohoku University
-
石田 清仁
東北大院工
-
石田 清仁
東北大学未来科学技術共同研究センター
-
Ohnuma Ikuo
Department of Materials Science, Graduate School of Engineering, Tohoku University
-
Kainuma R
Institute Of Multidisciplinary Research For Advanced Materials Tohoku University
-
Ohnuma I
Tohoku Univ. Sendai Jpn
-
Ohnuma Ikuo
Department Of Materials Science Graduate School Of Engineering Tohoku University
-
KAINUMA Ryosuke
Department of Materials Science, Graduate School of Engineering, Tohoku University
-
Kainuma Ryosuke
Department Of Materials Science Graduate School Of Engineering Tohoku University
-
Kainuma Ryosuke
Institute For Multidisciplinary Research For Advanced Materials Tohoku University
-
Ishida Kiyohito
Department Of Materials Science Faculty Of Engineering Tohoku University
-
Ishida Kiyohito
Department of Material Science, Graduate School of Engineering, Tohoku University, Sendai 980-8579, Japan
関連論文
- 1016 Cu-Al-Mn基形状記憶合金の超塑性(S03-3 形状記憶合金の特性と応用技術(3),21世紀地球環境革命の機械工学:人・マイクロナノ・エネルギー・環境)
- 金属を"溶かす"--計算状態図による高効率なはんだ材料設計と応用
- High-strength Fe–20Mn–Al–C-based Alloys with Low Density
- Solubility Products of VS and NbS in Iron Alloys
- Phase Equilibria in FeS–XS and MnS–XS (X=Ti, Nb and V) Systems
- 28pTH-2 バルク敏感光電子分光法によるNi_Mn_In_x組成依存性(28pTH 遍歴電子系・f電子系,領域3(磁性,磁気共鳴))
- 20aQG-3 強磁性形状記憶合金Ni_Mn_In_xのレーザー光電子分光(20aQG 遍歴電子系・f電子系,領域3(磁性,磁気共鳴))
- 20aPS-41 強磁性ホイスラー合金Co_2CrGaのキュリー点近傍での磁化過程(20aPS 領域3ポスターセッション(薄膜・人工格子・表面・微小領域・スピントロニクス・遍歴・化合物磁性),領域3(磁性,磁気共鳴))
- 特集「計算状態図と材料設計」によせて
- 27aPS-102 Co基強磁性ホイスラー合金中の^Coの正の強磁場NMRシフトの起源(27aPS 領域3ポスターセッション(遍歴磁性体・化合物磁性体・f電子系・磁性一般),領域3(磁性,磁気共鳴))
- 21pPSA-39 強磁性ホイスラー合金Co_2VGa中の^Coの正の超微細磁場の起源(21pPSA 領域3ポスターセッション,領域3(磁性,磁気共鳴))
- 23aPS-51 強磁場下におけるNiCoMnInメタ磁性形状記憶合金のマルテンサイト変態挙動(23aPS ポスターセッション,領域3(磁性,磁気共鳴))
- 22aPS-18 強磁性ホイスラー合金Co_2VGaのキュリー点近傍での磁化過程(領域3ポスターセッション(f電子,遍歴,化合物,酸化物,磁性一般,表面・界面),領域3,磁性,磁気共鳴)
- 18aPS-43 Ni-Mn-In基メタ磁性形状記憶合金の磁性(18aPS 領域3ポスターセッション(磁性),領域3(磁性,磁気共鳴))
- メタ磁性形状記憶合金Ni(Co)MnZ(Z=In,Sn,Al)の強磁場中磁化過程に関する研究 (強磁場下の物性の研究--磁性)
- 1013 Pd-In系形状記憶合金の開発(S03-3 形状記憶合金の特性と応用技術(3),21世紀地球環境革命の機械工学:人・マイクロナノ・エネルギー・環境)
- 合金状態図の研究と新材料開発
- 23aPS-59 Ni_2Mn(Al_Ga_x)合金の磁気的性質(23aPS ポスターセッション,領域3(磁性,磁気共鳴))
- 2115 高強度Cu-Al-Mn系超弾性合金の開発(S06-3 形状記憶合金の特性と応用技術(3),S06 形状記憶合金の特性と応用技術)
- 2116 Co-Al合金の高温形状記憶効果(S06-3 形状記憶合金の特性と応用技術(3),S06 形状記憶合金の特性と応用技術)
- 2117 Co-Ni-Al基強磁性形状記憶合金における超弾性特性(S06-3 形状記憶合金の特性と応用技術(3),S06 形状記憶合金の特性と応用技術)
- L2_1構造を持つCo_2CrGaフルホイスラー合金薄膜の作製とそれを用いた強磁性トンネル接合素子のトンネル磁気抵抗
- 18aPS-72 Co_2(V_Mn_x)Gaホイスラー合金の磁気的性質と電子状態(18aPS 領域3ポスターセッション(磁性),領域3(磁性,磁気共鳴))
- Ni-Mn-X(X=In,Sn)基メタ磁性形状記憶合金の基礎物性調査 (強磁場下の物性の研究--磁性)
- Ni-Mn-X(X=In,Sn)基メタ磁性形状記憶合金の基礎物性調査 (強磁場下の物性の研究--その他)
- 222 機能傾斜型超弾性合金の医療用ガイドワイヤーへの適用(OS9(4) 形状記憶合金の特性と応用)
- 221 冷間圧延制御による形状記憶合金の多機能化(OS9(4) 形状記憶合金の特性と応用)
- Observation of Reverse Transformation in Metamagnetic Shape Memory Alloy Ni_Co_Mn_Al_ by High-Field X-Ray Diffraction Measurements
- ハーフメタル型Co基ホイスラー合金の磁気特性と相安定性
- 25pPSA-8 強磁性ホイスラー合金Co_2VGaのキュリー点近傍での磁化過程(25pPSA 領域3ポスターセッション,領域3(磁性,磁気共鳴))
- CDCプロセス(炭化物分散浸炭法)による高速度鋼の開発
- Al-Bi合金の粒界移動に伴う液相Bi粒子の引摺現象
- Bi-Base Composite Solders for Mounting Power Semiconductor Devices(Selected Papers in ICEP 2007)
- Fe/Zn拡散対に形成される化合物層の組織変化(合金化溶融亜鉛めっき皮膜の構造と特性)
- Kinetic Arrest of Martensitic Transformation in Ni_Co_Mn_Ga_ Metamagnetic Shape Memory Alloy
- Co基γ'析出型超耐熱合金
- Phase Equilibria and Microstructure on γ' Phase in Co-Ni-Al-W System
- Fe-C-Cr-Zr 4元系における炭化物/オーステナイト間の合金元素の分配
- Fe-Cr-Ni-S系における硫化物の熱力学的解析
- Fe-Ti-S3元系におけるFe側の相平衡
- Fe-Cr-S合金における微細硫化物の析出
- Fe-Cr-S合金における硫化物析出のその場観察
- 凝固時に生成する鋼中CrSの形態制御
- Shape Memory Response in Ni_Co_Mn_Al_ Polycrystalline Alloy
- Martensitic Transformation in NiCoMnSn Metamagnetic Shape Memory Alloy Powders
- Superplasticity of Cu-Al-Mn-Ni Shape Memory Alloy
- Control of Phase Transformation Temperatures by Substituents in Ni-Fe-Ga Ferromagnetic Shape Memory Alloys
- Magnetic Field-Induced Strain of Ni-Co-Mn-In Alloy in Pulsed Magnetic Field
- Effect of Alloying Elements on fcc/hcp Martensitic Transformation and Shape Memory Properties in Co-Al Alloys
- FCC/HCP Martensitic Transformation and High-Temperature Shape Memory Properties in Co-Si Alloys
- Effects of Aging and Co Addition on Martensitic and Magnetic Transitions in Ni-Al-Fe β-based Shape Memory Alloys
- Experimental Verification of Magnetically Induced Phase Separation in αCo Phase and Thermodynamic Calculations of Phase Equilibria in the Co-W System
- Influence of Co Addition on Martensitic and Magnetic Transitions in Ni-Fe-Ga β Based Shape Memory Alloys
- Damping Properties of Ductile Cu-Al-Mn-Based Shape Memory Alloys
- Martensitic Transformation and Magnetic Properties of Cu-Ga-Mn β Alloys
- Ferromagnetic Co-Ni-Al Shape Memory Alloys with β+γ Two-Phase Structure
- Shape Memory Effect Associated with FCC-HCP Martensitic Transformation in Co-Al Alloys
- Magnetocrystalline Anisotropy in a Single-Variant Co-Ni-Al Ferromagnetic Shape Memory Alloy
- Development of Machinable High-Strength Copper-Based Alloys by Sulfide Dispersion
- Magnetocrystalline Anisotropy in a Single Crystal Fe-Ni-Ga Ferromagnetic Shape Memory Alloy
- Morphology of Sulfide Formed in the Fe-Cr-S Ternary Alloys
- Magnetic and Martensitic Phase Transformations in a Ni_Ga_Fe Alloy
- Carbide Dispersion Carburizing (CDC) of Fe-Mo-V Based High-speed Steels
- Surface Tension and Density Measurements of Sn-Ag-Sb Liquid Alloys and Phase Diagram Calculations of the Sn-Ag-Sb ternary system
- Interfacial Reaction and Morphology Between Molten Sn Base Solders and Cu Substrate
- Thermodynamic Calculations of Phase Equilibria, Surface Tension and Viscosity in the In-Ag-X (X=Bi, Sb) System
- Thermodynamic Calculation of Phase Diagram in the Bi-In-Sb Ternary System
- Solubility Product of TiN in Austenite
- The Control of the Morphology of MnS Inclusions in Steel during Solidification
- 状態図・熱力学データベースと合金設計
- Fe-Al-C合金の層状組織
- マイクロソルダー合金の熱力学データベースの開発
- Solubility Products of VS and NbS in Iron Alloys
- Phase Equilibria and Thermodynamic Evaluation Approximating Short-range Ordering Energy in the Fe-Rh Binary System
- Phase Equilibria in FeS-XS and MnS-XS (X=Ti, Nb and V) Systems
- Effects of Liquid Bi Particles on Grain Growth of Fe-1.9vol%Bi Alloy
- A New Pb-free Machinable Ferritic Stainless Steel
- Thermodynamic Calculations of Phase Equilibria in the Fe-Cr-S System
- Solid/Liquid Equilibria in Fe-Cu Based Ternary Systems
- Reactive Diffusion between Solid Fe and Liquid Zn at 723K
- Fe-Rh-Ti3元系における相平衡の熱力学解析
- Kinetic Arrest of Martensitic Transformation in NiCoMnAl Metamagnetic Shape Memory Alloy
- New Materials 磁場により大きな変位と応力が得られる新型磁性形状記憶材料--メタ磁性形状記憶合金
- High-strength Fe-20Mn-Al-C-based Alloys with Low Density
- Fe-Al-C系合金のパーライト組織と機械的特性
- Martensitic Transformation and Shape Memory Effect in Ausaged Fe-Ni-Si Alloys
- 液相2相分離型合金粉末に形成される卵型コア構造組織
- Two-Way Shape Memory Effect Induced by Bending Deformation in Ductile Cu-Al-Mn Alloys
- Phase Equilibria and Phase Transformations in New B2-type Ferromagnetic Shape Memory Alloys of Co-Ni-Ga and Co-Ni-Al Systems
- Examination of the Zener Relationship between Grain Size and Particle Dispersion
- Fe-Ni-Si合金のマルテンサイト変態に及ぼすオースエージの影響
- Dragging of Liquid Bi Particles Induced by Grain Boundary Migration in Al-Bi Alloys
- Ordering, Martensitic and Ferromagnetic Transformations in Ni-Al-Mn Heusler Shape Memory Alloys
- 巨大超弾性を示す鉄系形状記憶合金の開発
- Superelasticity at Low Temperatures in Cu-17Al-15Mn (at%) Shape Memory Alloy
- Influence of Annealing Conditions on Magnetic Properties of Ni_Mn_In_x Heusler-Type Alloys
- Metamagnetic Shape Memory Effect in Porous Ni_Co_7Mn_Sn_ Alloy Compacts Fabricated by Pressureless Sintering
- 高加工性CuAlMn形状記憶合金の開発と巻き爪矯正クリップの実用化
- Experimental and Thermodynamic Studies of the Fe–Si Binary System
- Experimental and Thermodynamic Studies of the Fe-Si Binary System