Liquid Phase Boundaries at 1873K in the Ternary CaO-Al_2O_3-MO_x(MO_x:MgO, ZrO_2) and CaO-SiO_2-MO_x(MO_x:TiO_2, MgO, Al_2O_3) Systems
スポンサーリンク
概要
- 論文の詳細を見る
The liquid phase boundaries in the CaO-Al<SUB>2</SUB>O<SUB>3</SUB>-MgO, CaO-Al<SUB>2</SUB>O<SUB>3</SUB>-ZrO<SUB>2</SUB>, CaO-SiO<SUB>2</SUB>-TiO<SUB>2</SUB>, CaO-SiO<SUB>2</SUB>-MgO and CaO-SiO<SUB>2</SUB>-Al<SUB>2</SUB>O<SUB>3</SUB> ternary slags were determined at 1873K by using a slag-crucible (CaO, MgO, Al<SUB>2</SUB>O<SUB>3</SUB> and ZrO<SUB>2</SUB>-11mol%CaO) equilibration technique. The equilibrium phase at crucible-slag interface was determined by a microprobe analysis.
- 社団法人 日本鉄鋼協会の論文
- 1996-02-15
著者
-
Suito Hideaki
Institute For Advanced Materials Processing Tohoku University
-
Sakai H
Graduate Student Tohoku University
-
SAKAI Hiroaki
Graduate Student, Tohoku University
-
Suito Hideaki
Institute For Advanced Materials Processing Tohoku Unibersity
-
SAKAI Hiroaki
Graduate Student, Nagoya Institute of Technology
関連論文
- Effect of Oxide Catalyst on Heterogeneous Nucleation in Fe-10mass%Ni Alloys
- Quantitative Analysis of Total and Insoluble Elements and Inclusion Composition in Metal by Laser Ablation ICP-MS Method
- Analysis of Composition and Size Distribution of Inclusions in Fe-10Mass%Ni Alloy Deoxidized by Al and Mg Using Laser Ablation ICP Mass Spectrometry
- Analysis of Size Distribution of Inclusions in Metal by Using Single-particle Optical Sensing Method
- Measurement of Inclusion Size by Laser Ablation ICP Mass Spectrometry
- Thermodynamics on Control of Inclusions Composition in Ultra-clean Steels
- Effect of Sulfur and Oxygen on Engulfment and Pushing of Deoxidation Particles of ZrO_2 and Al_2O_3 during Solidification of Fe-10mass%Ni Alloy
- Dissolution Behavior and Stabilization of Fluorine in Secondary Refining Slags
- Effect of Particle Size Distribution on Austenite Grain Growth in Fe-0.05mass%C Alloy Deoxidized with Mn-Si, Ti, Mg, Zr and Ce
- Influence of Gypsum Addition and Hydrothermal Treatment on Dissolution Behavior of Fluorine in Hot Metal Pretreatment Slags
- Mechanism of Dephosphorization with CaO-SiO_2-Fe_tO Slags Containing Mesoscopic Scale 2CaO・SiO_2 Particles
- Precipitation and Dispersion Control of MnS by Deoxidation Products of ZrO_2, Al_2O_3, MgO and MnO-SiO_2 Particles in Fe-10mass%Ni Alloy
- Behavior of Phosphorous Transfer from CaO-Fe_tO-P_2O_5(-SiO_2) Slag to CaO Particles
- Refinement of Solidification Microstructure and Austenite Grain by Fine Inclusion Particles
- Effect of Nonrandomly Dispersed Particles on Austenite Grain Growth in Fe-10mass%Ni and Fe-0.20mass%C-0.02mass%P Alloys
- Fluorine-containing Mineral Phases in Ironmaking and Steelmaking Slags and Their Solubilities in Aqueous Solution
- Phosphorous Partition between 2CaO・SiO_2 Particles and CaO-SiO_2-Fe_tO Slags
- Effects of Dissolved Oxygen and Size Distribution on Particle Coarsening of Deoxidation Product
- Effects of N, C and Si Contents and MgO on Dispersion of TiN Particles in Fe-1.5%Mn-0.05(0.15)%C Alloy
- Dispersion Behavior of MgO, ZrO_2, Al_2O_3, CaO-Al_2O_3 and MnO-SiO_2 Deoxidation Particles during Solidification of Fe-10mass%Ni Alloy
- Effects of Oxide Particles and Solute Elements on Austenite Grain Growth in Fe-0.05mass%C and Fe-10mass%Ni Alloys
- Characteristics of Particle Size Distribution in Early Stage of Deoxidation
- Characteristics of Particle Size Distribution of Deoxidation Products with Mg, Zr, Al, Ca, Si/Mn and Mg/Al in Fe-10mass%Ni Alloy
- Thermodynamic Analysis of Slag Recycling Using a Slag Regenerator
- Dispersion of Primary Inclusions of Ce_2O_3 and CeS in Fe-0.20 mass%C-0.02 mass%P Alloy
- Effect of Primary Deoxidation Products orf AL_2O_3, ZrO_2, Ce_2O_3 and MgO on TiN Precipitation in Fe-10mass%Ni Alloy
- Thermodynamic Assessment of Hot Metal and Steel Dephosphorization with MnO-containing BOF Slags
- Thermodynamic Assessment of Manganese Distribution in Hot Metal and Steel
- Hydration of Crystallized Lime in BOF Slags
- Precipitation Behavior of Fe-Al-O Inclusions under Unidirectional Solidification of Fe-30mass%Ni Alloys Saturated with CaO-Al_2O_3 Slags
- Reoxidation of Aluminum in Liquid Iron with CaO-Al_2O_3-Fe_tO (≦3mass%) Slags
- Precipitation Behavior of Al-Ti-O-N Inclusions in Unidirectionally Solidified Fe-30mass%Ni Alloy
- Nitride Capacities in the CaO-base Ternary Slags at 1873K
- Liquid Phase Boundaries at 1873K in the Ternary CaO-Al_2O_3-MO_x(MO_x:MgO, ZrO_2) and CaO-SiO_2-MO_x(MO_x:TiO_2, MgO, Al_2O_3) Systems
- Activities in CaO-MgO_Al_2O_3 Slags and Deoxidation Equilibria of Al, Mg, and Ca
- Influence of Dissolved Cerium and Primary Inclusion Particles of Ce_2O_3 and CeS on Solidification Behavior of Fe-0.20mass%C-0.02mass%P Alloy
- Effect of dissolved Cerium on Austenite Grain Growth in an Fe-0.20mass%C-0.02mass%P Alloy
- Immobilization of Fluorine in Aqueous Solution by Calcium Aluminum Ferrite and the Mixture of Calcium Aluminate and Gypsum
- Immobilization of Hexavalent Chromium in Aqueous Solution through the Formation of 3CaO ・ (Al,Fe)_2O_3・ Ca(OH)_2/ xH_2O Phase, Ettringite and C-S-H Gel
- Thermodynamics of Aluminum and Manganese Deoxidation Equilibria in Fe-Ni and Fe-Cr Alloys
- Stabilization of Hexavalent Chromium in Solution by Mono-chromate, Ettringite and C-S-H Gel
- Effects of Calcium Hydroxide and Dicalcium Ferrite on Immobilization of Fluorine in Solution with Calcium Aluminates
- Calcium and Magnesium Deoxidation in Fe-Ni and Fe-Cr Alloys Equilibrated with CaO-Al_2O_3 and CaO-Al_2O_3-MgO Slags
- Effects of Calcium Silicates on Immobilization of Fluorine in Solution
- Austenite Grain Size Distribution and Topological Properties in Fe-0.09 to 0.53 mass%C-0.02 mass%P Alloys Containing Primary Inclusions of Ce_2O_3 and CeS
- Electrochemical Measurement of Critical Supersaturation in Fe-O__--M__- (M=Al, Si, and Zr)and Fe-O__--Al__--M__-(M=C, Mn, Cr, Si, and Ti)Melts by Solid Electrolyte Galvanic Cell
- Pinning of Austenite Grain Boundary of Fe-0.09 to 0.53 mass% C-0.02 mass%P Alloys by Primary Inclusions of Ce_2O_3 and CeS
- Leaching Behavior of Fluorine-containing Minerals in Seawater
- Magnesium Deoxidation and Nitrogen Distribution in Liquid Nickel Equilibrated with CaO-Al2O3-MgO Slags
- Precipitation Behavior of TiN in Fe-10mass%Ni Alloy during Solidification and Isothermal Holding at 1400℃
- Verification of the Design Concept on Nuts in Bolt/Nut Assembly for the Revision of ISO 898-2 and ISO 898-6