Microstructure and Bend Ductility of W-0.3mass%TiC Alloys Fabricated by Advanced Powder-Metallurgical Processing
スポンサーリンク
概要
- 論文の詳細を見る
- Japan Institute of Metalsの論文
- 2005-03-20
著者
-
KURISHITA Hiroaki
International Research Center for Nuclear Materials Science, Institute for Materials Research, Tohok
-
栗下 裕明
International Res. Center For Nuclear Materials Sci. Inst. For Materials Res. Tohoku Univ.
-
Kurishita Hiroaki
International Research Center For Nuclear Materials Science Institute For Materials Research Tohoku
-
Kurishita Hiroaki
The Oarai Branch Institute For Materials Research Tohoku University
-
Kurishita Hiroaki
International Research Center For Nuclear Material Science Institute For Material Research Tohoku Un
-
栗下 裕明
東北大学金属材料研究所
-
ARAKAWA Hideo
International Research Center for Nuclear Materials Science, Institute for Materials Research, Tohok
-
ISHIJIMA Yasuhiro
International Research Center for Nuclear Materials Science, IMR, Tohoku University
-
HASEGAWA Masayuki
International Research Center for Nuclear Materials Science, IMR, Tohoku University
-
HIRAOKA Yutaka
Okayama University of Science
-
TAKIDA Tomohiro
Allied Tech Inc.
-
TAKEBE Katsushi
Allied Tech Inc.
-
Arakawa Hideo
International Research Center For Nuclear Materials Science Imr Tohoku University
-
Hiraoka Yutaka
Okayama Univ. Sci. Okayama Jpn
-
Ishijima Yasuhiro
International Research Center For Nuclear Materials Science Imr Tohoku University
-
Takida Tomohiro
Allied Material Corp.
-
Hasegawa Masayuki
The Oarai Center Inst. For Materials Res. Tohoku Univ.
関連論文
- 7 微小試験片による低放射化材料の破壊靱性評価(シンポジウムIV : 強力中性子源要素技術開発研究の成果)
- Enhanced Tensile Strength and Plasticity of Zr-Cu-Al Bulk Glassy Alloys at Cryogenic Temperatures
- 2. テストセル系の開発(国際核融合材料照射施設(IFMIF)の設計と開発の現状)
- 高熱流束機器用高靭性高Z材料の開発
- Improvement of Surface Exfoliation Behavior by Helium-ion Bombardment of a Tungsten Alloy Fabricated by Mechanical Alloying
- Densification of Gas Atomized Ni-Based Metallic Glassy Powders by Spark Plasma Sintering
- Fabrication of ZrCuAlNi Metallic Glassy Matrix Composite Containing ZrO_2 Particles by Spark Plasma Sintering Process
- 25pA25p 高熱流束機器用タングステン合金製造条件の最適化(プラズマ基礎/炉材料)
- Influences of Temperature and Strain Rate on Mechanical Behavior of a Cu_Zr_Al_5Ag_5 Bulk Glassy Alloy
- Cu_Zr_Al_5Ag_5 Bulk Glassy Alloy with Enhanced Compressive Strength and Plasticity at Cryogenic Temperature
- Effect of Chloride ion concentration on the fatigue crack growth rate of a Zr55Al10Ni5Cu30 bulk metallic glass
- Mechanical Properties of Melt-Spun Amorphous Ni-Nb-Zr Alloys after Hydrogen Charging
- Fracture Toughness of Zr_Al_Ni_5Cu_ Bulk Metallic Glass by 3-Point Bend Testing
- 512 タングステン材料の超塑性に関する基礎研究
- Development of Controlled Temperature-Cycle Irradiation Technique in JMTR
- 耐中性子照射脆化に優れた微細結晶粒と分散粒子を有するV-Y合金
- Vickers Microhardness Testing with Miniaturized Disk Specimens
- Fracture Toughness of JLF-1 by Miniaturized 3-Point Bend Specimens with 3.3-7.0mm Thickness
- High Temperature Deformation of a Fine-Grained and Particle-Dispersed V-2.3%Y-4%Ti-3%Mo Alloy
- Effect of Fast Neutron Irradiation on the Microstructure in Particle Dispersed Ultra-fine Grained V-Y Alloys
- Temperature-Time-Transformation Curve and Viscous Flow Deformation of Zr_Cu_Al_Ni_5 Bulk Glassy Alloy
- ヘリウム照射特性の優れた微細結晶粒組織を有する先進W合金の微細組織発達
- 25pA21p 超微細粒・粒子分散組織をもつバナジウム合金の開発とその特性(プラズマ基礎/炉材料)
- 211 高 Z プラズマ対向材料の接合と熱負荷特性に関する研究
- 高純度鉄中の不純物銅原子の照射誘起析出
- Development of Molybdenum Alloy with High Toughness at Low Temperatures
- 29pPSB-18 CeT_2 (T=Al, Ru) 化合物微細粒の低温電子物性
- 「平成17年度大洗原子力材料夏の学校」報告
- Microstructure and Bend Ductility of W-0.3mass%TiC Alloys Fabricated by Advanced Powder-Metallurgical Processing
- Mechanical Properties of Fine-Grained, Sintered Molybdenum Alloys with Dispersed Particles Developed by Mechanical Alloying
- 高融点金属の脆さの改善
- 高融点金属の脆さの改善と材料照射の新しい利用に向けて
- 4.構造材料としての高Z材とその開発状況(プラズマ対向壁としての高Z材)
- SiC単結晶-多結晶接合界面の透過型電子顕微鏡観察
- SiC双結晶の粒界構造と強度
- 常圧焼結SiCの粒界と高温強度
- Al-5.7at%Mg合金の高温変形における転位密度と内部応力
- 2324,7475合金の高温変形
- Formation Condition of Fiberform Nanostructured Tungsten by Helium Plasma Exposure
- Effect of Specimen Geometry on Charpy Impact Test Results for Ferritic Steel Irradiated in JMTR
- Moの粒界破壊と侵入型不純物の効果
- モリブデン双結晶の破壊強度 (「粒界・相界面」)
- アルミニウムとその合金の塑性変形と強さ(軽金属基礎講座-5-)
- Ceramic particulate reinforced Zr55Cu30Al10Ni5 metallic glassy matrix composite fabricated by spark plasma sintering (Special issue on bulk metallic glasses: selected papers from the fifth international conference on bulk metallic glasses (BMGV))
- 30pB15P 高熱流束機器用W合金における材料内部のHe挙動に及ぼす微細組織の影響(真空・第一壁・材料)
- D-He-Be混合プラズマ環境下でのタングステンの微細組織と重水素保持特性
- Microstructures and Deuterium-Retention Behavior of Tungsten Exposed to D+(He and/or Be) Mixture Plasmas