Effect of Chloride ion concentration on the fatigue crack growth rate of a Zr55Al10Ni5Cu30 bulk metallic glass
スポンサーリンク
概要
著者
-
浅見 勝彦
東北大学金属材料研究所
-
浅見 勝彦
東北大・金研
-
Kurishita Hiroaki
International Research Center For Nuclear Materials Science Institute For Materials Research Tohoku
-
栗下 裕明
東北大学金属材料研究所
-
Kawashima A
Tohoku Univ. Ibaraki Jpn
-
Asami K
Institute For Materials Research Tohoku University
-
Kawashima Asahi
Institute For Materials Research Tohoku University
-
Kawashima Asahi
Tohoku Univ. Sendai Jpn
関連論文
- 7 微小試験片による低放射化材料の破壊靱性評価(シンポジウムIV : 強力中性子源要素技術開発研究の成果)
- Antibacterial activity of composite resin with glass-ionomer filler particles
- Co-Cr-C/Ag/Ti膜の磁気特性に与えるAg中間層効果
- Co-Cr-C/Ag/Ti膜の磁気特性におけるAg中間層効果
- Enhanced Tensile Strength and Plasticity of Zr-Cu-Al Bulk Glassy Alloys at Cryogenic Temperatures
- 溶融Cuをフラックスとして得た新しい層状化合物PrRh_B_2単結晶の化学状態及び性質
- 17年間大気暴露した耐候性鋼さび層のキャラクタリゼーション
- アノード電着により作製した高温海水電解の酸素発生用Mn-Mo-Fe酸化物アノード
- 地球温暖化防止とエネルギー安定供給のためのキーマテリアルズ
- CO_2 リサイクルプラント用電極および触媒の創製
- グローバル二酸化炭素リサイクル
- 金属ガラスの耐食性
- 2. テストセル系の開発(国際核融合材料照射施設(IFMIF)の設計と開発の現状)
- 口腔内擬似環境におけるチタンの重金属イオン吸着現象
- 高熱流束機器用高靭性高Z材料の開発
- 酸化鉄中におけるFe2+およびFe3+のESCAによる定量法
- Densification of Gas Atomized Ni-Based Metallic Glassy Powders by Spark Plasma Sintering
- Fabrication of ZrCuAlNi Metallic Glassy Matrix Composite Containing ZrO_2 Particles by Spark Plasma Sintering Process
- 25pA25p 高熱流束機器用タングステン合金製造条件の最適化(プラズマ基礎/炉材料)
- Influences of Temperature and Strain Rate on Mechanical Behavior of a Cu_Zr_Al_5Ag_5 Bulk Glassy Alloy
- Cu_Zr_Al_5Ag_5 Bulk Glassy Alloy with Enhanced Compressive Strength and Plasticity at Cryogenic Temperature
- Annealing-Induced Devitrification Behavior of a Ti_Zr_Ni_Cu_ Glassy Alloy
- Fabrication and Corrosion Property of Novel Ti-Based Bulk Glassy Alloys without Ni
- Microstructure and Corrosion Resistance of Ti-Zr-Cu-Pd-Sn Glassy and Nanocrystalline Alloys
- Effect of Chloride ion concentration on the fatigue crack growth rate of a Zr55Al10Ni5Cu30 bulk metallic glass
- Corrosion Behavior of Ti-Based Metallic Glasses
- Preparation of a Wide Zr_Al_Ni_5Cu_ Metallic Glass Sheet by a Twin-Roller Type Casting Method and Its Mechanical Properties
- Mechanical Properties of Melt-Spun Amorphous Ni-Nb-Zr Alloys after Hydrogen Charging
- Fracture Toughness of Zr_Al_Ni_5Cu_ Bulk Metallic Glass by 3-Point Bend Testing
- Effect of Tantalum on Corrosion Resistance of Ni-Nb(-Ta)-Ti-Zr Glassy Alloys at High Temperature
- New Cu-Zr-Al-Nb Bulk Glassy Alloys with High Corrosion Resistance
- Hydrogen Evolution Characteristics of Sputter-Deposited Co-Mo, Co-Al and Co-Mo-Al Alloy Electrodes in NaOH Solution
- Application of Sputter Deposition Technique to the Preparation of Amorphous Alloy-Derived Catalysts for NO Decomposition
- The Microcomposite Structure of Catalysts Prepared by Oxidation of Amorphous Ni-Ta-Pd Alloys
- The Corrosion Behavior of Ni-Ta-5P Alloys in Concentrated Hydrochloric Acid
- CO_2 Methanation Catalysts Prepared from Amorphous Ni-Valve Metal Alloys Containing Platinum Group Elements
- The Electrocatalytic Oxidation of Ethylene and Methane, and Reduction of Oxygen on Gas-Diffusion Electrodes Made of Amorphous Nickel-Valve Metal-Platinum Group Metal Alloys
- The Corrosion Behavior of Sputter-Deposited Magnesium-Valve Metal Alloys
- 生体擬似溶液浸漬実験におけるSi汚染の検討
- 512 タングステン材料の超塑性に関する基礎研究
- Development of Controlled Temperature-Cycle Irradiation Technique in JMTR
- 耐中性子照射脆化に優れた微細結晶粒と分散粒子を有するV-Y合金
- High Temperature Deformation of a Fine-Grained and Particle-Dispersed V-2.3%Y-4%Ti-3%Mo Alloy
- Effect of Fast Neutron Irradiation on the Microstructure in Particle Dispersed Ultra-fine Grained V-Y Alloys
- Temperature-Time-Transformation Curve and Viscous Flow Deformation of Zr_Cu_Al_Ni_5 Bulk Glassy Alloy
- ヘリウム照射特性の優れた微細結晶粒組織を有する先進W合金の微細組織発達
- 25pA21p 超微細粒・粒子分散組織をもつバナジウム合金の開発とその特性(プラズマ基礎/炉材料)
- 211 高 Z プラズマ対向材料の接合と熱負荷特性に関する研究
- 高純度鉄中の不純物銅原子の照射誘起析出
- 高温8kmol m^ NaOH溶液中における水素発生のための電析Co-FeおよびCo-Fe-C合金
- 回折による構造解析結果の正しい記述のために
- Amorphous Alloy Electrodes for Electro-oxidation of Propane
- 29pPSB-18 CeT_2 (T=Al, Ru) 化合物微細粒の低温電子物性
- 「平成17年度大洗原子力材料夏の学校」報告
- アマルガムとチタンの接触腐食における溶出イオンの増減
- Microstructure and Bend Ductility of W-0.3mass%TiC Alloys Fabricated by Advanced Powder-Metallurgical Processing
- Mechanical Properties of Fine-Grained, Sintered Molybdenum Alloys with Dispersed Particles Developed by Mechanical Alloying
- 高融点金属の脆さの改善
- 高融点金属の脆さの改善と材料照射の新しい利用に向けて
- 4.構造材料としての高Z材とその開発状況(プラズマ対向壁としての高Z材)
- SiC単結晶-多結晶接合界面の透過型電子顕微鏡観察
- SiC双結晶の粒界構造と強度
- 常圧焼結SiCの粒界と高温強度
- Al-5.7at%Mg合金の高温変形における転位密度と内部応力
- 2324,7475合金の高温変形
- A Surface Study of Amorphous Nickel-Base Alloys Immersed in Liquid Sodium Contaminated with Impurities
- Effect of Specimen Geometry on Charpy Impact Test Results for Ferritic Steel Irradiated in JMTR
- Moの粒界破壊と侵入型不純物の効果
- モリブデン双結晶の破壊強度 (「粒界・相界面」)
- アルミニウムとその合金の塑性変形と強さ(軽金属基礎講座-5-)
- Effects of Ion Etching and Annealing in O_2 Atmosphere Following Ion Etching on Properties and Chemistry of Sr_Bi_Ta_2O_ Thin Films
- 細胞毒性の少ない金属元素から構成される新しい生体用チタン基形状記憶合金とその耐食性
- Ceramic particulate reinforced Zr55Cu30Al10Ni5 metallic glassy matrix composite fabricated by spark plasma sintering (Special issue on bulk metallic glasses: selected papers from the fifth international conference on bulk metallic glasses (BMGV))
- NaCl水溶液中の白金電極における特異な塩素発生機構の解明
- 金属ガラスの化学的性質--耐食性 (特集 金属ガラス--新材料としての最近の展開(上))
- Characterization of Surface of Amorphous Ni-Nb-Ta-P Alloys Passivated in a 12kmol/m^3 HCl Solution
- 長期大気暴露した耐候性鋼さび層のキャラクタリゼーション
- 各種表面分析法による金属表面の反応生成物解析
- 312 Fe-Cr-Mo-C-B(-Nb or Ta)系ガラス合金の作製と耐食性(制御)(日本機械学会東北支部・腐食防食協会東北支部共催セッション)
- Corrosion-Resistant Amorphous Alloy Ribbons for Electromagnetic Filtration of Iron Rusts from Water
- X線光電子分光法による金属表面の分析
- 魚肉ペ-スト中におけるステンレス鋼の腐食に関する検討
- Pitting Corrosion of Amorphous Ni-Zr Alloys in Chloride Ion Containing Sulfuric Acid Solutions
- The Role of Phosphorus in Enhancing Corrosion Resistance of Amorphous Alloys
- Recent Progress in Corrosion-Resistant New Alloys Prepared by Sputter Deposition
- Amorphous Alloy Electrodes for Fuel Cells
- High Temperature Sulfidation and Oxidation Behavior of Sputter-Depotited Al-refractory Metal Alloys
- Corrosion Behavior of Amorphous Nickel-Base Alloys in a Boiling Concentrated Sodium Hydroxide Solution
- Corrosion Behavior of Amorphous Nickel-Valve Metal Alloys in Boiling Concentrated Nitric and Hydrochloric Acids
- 7. 鉄鋼表面分析のための X 線光電子分光法(鋼材の表面物性とその評価技術 : (II) 分析技術)
- Effect of Manganese on the Corrosion Behavior of Chromium-Bearing Amorphous Metal-Metalloid Alloys
- APSIA '98 に参加して
- 金属表面酸化膜のXPSによる定量解析
- ケーススタディ - 電気化学における測定と評価 金属上の酸化皮膜の解析(3) XPSおよびAES
- ESCAによる表面皮膜分析
- アモルファスCu-Ti合金ろうによるアルミナと銅の接合
- SERT法による304ステンレス鋼の20%NaCl水溶液中100℃における応力腐食割れ
- 表面分析の原理と二, 三の具体例
- 30pB15P 高熱流束機器用W合金における材料内部のHe挙動に及ぼす微細組織の影響(真空・第一壁・材料)
- D-He-Be混合プラズマ環境下でのタングステンの微細組織と重水素保持特性