Thermal and Stability Considerations of Super LWR during Sliding Pressure Startup

概要

論文の詳細を見る
The feasibility of the sliding pressure startup of a high-temperature supercritical-pressure light water reactor (super LWR, SCLWR-H) is assessed from both thermal and stability considerations. In the sliding pressure startup, nuclear heating starts at subcritical pressure and the reactor is pressurized to supercritical pressure at a low power and high enough flow rate. The reactor power and flow rate are then raised gradually to the rated normal values at constant supercritical operating pressure. During startup, the maximum cladding surface temperature must not exceed 620°C. For two-phase flow at subcritical pressures, the homogeneous equilibrium model is used. The thermal-hydraulic and coupled neutronic thermal-hydraulic stabilities during pressurization and power-raising are investigated by a frequency-domain linear analysis for both supercritical-pressure and subcritical-pressure operating conditions. The same stability criteria as those of BWRs are used. From the analysis results, a sliding pressure startup procedure is proposed for super LWR. The thermal criteria are satisfied by keeping the core power between the maximum allowable limit and minimum limit required for turbine startup and operation. The thermal-hydraulic stability and coupled neutronic thermal-hydraulic stability can be maintained by applying an orifice pressure drop coefficient at the inlet of fuel assembly and by controlling the power and flow rate during startup.
社団法人日本原子力学会の論文
2005-06-25

Thermal and Stability Considerations of Super LWR during Sliding Pressure Startup

スポンサーリンク

概要

著者

関連論文

スポンサーリンク