Influence of Welding Parameters and Shielding Gas Composition on GTA Weld Shape

概要

論文の詳細を見る
The interaction between the variable welding parameters and shielding gas composition in determining the weld shape in Ar-CO2 shielded gas tungsten arc (GTA) welding with SUS304 stainless steel is discussed. The GTA weld shape depends to a large extent on the pattern and strength of the Marangoni convection on the pool surface, which is controlled by the content of surface active element, oxygen, in the weld pool and the welding parameters. Results showed that oxygen absorption into the liquid pool during the welding process is sensitive to the CO2 concentration in the shielding gas. An inward Marangoni convection occurs on the pool surface when the oxygen content is over 100 ppm in the welding pool under Ar-0.3%CO2 shielding. A low oxygen content in weld pool changes the inward Marangoni convection to an outward direction under the Ar-0.1%CO2 shielding. The strength of the Marangoni convection on the liquid pool is a product of the temperature coefficient of the surface tension (dσ/dT) and the temperature gradient (dT/dr) on the pool surface. Different welding parameters will change the temperature distribution and gradient on the pool surface, and therefore, affect the strength of Marangoni convection and the weld shape.
2005-01-15