Kinetics and Critical Conditions for the Initiation of Dynamic Recrystallization in 304 Stainless Steel
スポンサーリンク
概要
- 論文の詳細を見る
Commercial 304 austenitic stainless steel was deformed in compression at high temperatures (800 to 1280°C) and at strain rates from 0.001 to 1 s−1. The critical and peak strains associated with dynamic recrystallization were determined based on changes in the work hardening rate as a function of the flow stress. The effect of the deformation variables (T, ε) on these values is analyzed; it is shown that over a range of temperature corrected strain rate (Z=1014 to 1016 s−1, Qdef=405 kJ/mol), the initiation of dynamic recrystallization is delayed. This retardation is attributed to the segregation of substitutional impurity elements, principally phosphorus, to the sub-boundaries of the newly-forming DRX grains.
- 社団法人 日本鉄鋼協会の論文
- 2004-09-15
著者
-
Stewart G.
Department Of Metals And Materials Engineering Mcgill University
-
Jonas J.
Department Of Metallurgical Engineering Mcgill University
-
MONTHEILLET F.
Ecole Nationale Superieure des Mines de Saint-Etienne
-
Jonas J.
Department Of Materials Engineering Mcgill University
関連論文
- Effect of Alloying Elements on the Microstructure and Texture of Warm Rolled Steels
- Mathematical Modeling of Mean Flow Stress during the Hot Strip Rolling of Nb Steels
- Mathematical Modeling of the Mean Flow Stress, Fractional Softening and Grain Size during the Hot Strip Rolling of C-Mn Steels
- Influence of Ferrite Rolling Temperature on Microstructure and Texture in Deformed Low C and IF Steels
- TEM Characterization of the Recrystallization Behaviour of Warm Rolled Low Carbon Steels Containing Chromium during the Early Stages of Annealing
- Influence of Ferrite Rolling Temperature on Grain Size and Texture in Annealed Low C and IF Steels
- Mathematical Modelling of Mean Flow Stress during the Hot Strip Rolling of Multiply-alloyed Medium Carbon Steels
- Distinctive Aspects of the Physical Metallurgy of Warm Rolling
- Prediction of Interpass Softening from the Strain Hardening Rate Prior to Unloading
- Modelling Texture Change during the Static Recrystallization of a Cold Rolled and Annealed Ultra Low Carbon Steel Previously Warm Rolled in the Ferrite Region
- Dynamic Strain Aging and the Wire Drawing of Low Carbon Steel Rods
- Spreadsheet Modelling of Grain Size Evolution during Rod Rolling
- Kinetics and Critical Conditions for the Initiation of Dynamic Recrystallization in 304 Stainless Steel
- The Effect of Purity on Dynamic Recrystallization in Austenitic Stainless Steels
- FEM Simulation of Deep Drawing of Textured Aluminum Sheets Using Anisotropic Fourth-Order Strain-Tate Potential
- Static and Dynamic Strain Aging at High Temperatures in 304 Stainless Steel
- Effect of Silicon on the Interaction between Recrystallization and Precipitationin Niobium Microalloyed Steels
- Effect of Initial Grain Size on the Static Recrystallization Kinetics of Nb Microalloyed Steels
- Static Recrystallization of Nb and Nb-B Steels under Continuous Cooling Conditions
- Ultrasonic Prediction of r-value in Deep Drawing Steels.
- Gibbs energies of formation of TiS and Ti4C2S2 in austenite.
- Effect of Controlled Rolling on Texture Development in a Plain Carbon and a Nb Microalloyed Steel.
- Influence of Dynamic Recrystallisation on the Tensile Ductility of Steels in the Temperature Range 700 to 1150.DEG.C..