Failure Thresholds of High Burnup BWR Fuel Rods under RIA Conditions

概要

論文の詳細を見る
Transient deformation of high burnup boiling water reactor (BWR) fuel rods was measured and failure limit was examined under simulated reactivity-initiated accident (RIA) conditions. Brittle cladding failure occurred at a small hoop strain of about 0.4% during an early phase of the pulse irradiation tests at the Nuclear Safety Research Reactor (NSRR). Strain rates were in an order of tens %/s at the time of the failure. Comparison of the results with thermal expansion of pellets suggested that the cladding deformation was caused by thermal expansion of the pellets. In other words, the influence of fission gases in the pellets was small in the early phase deformation. Separate effect tests were conducted to examine influence of the cladding temperature on the cladding failure behavior. Influence of the pulse width on the failure threshold was discussed in terms of the strain rate, magnitude of the deformation and temperature of the cladding for high burnup BWR fuel rods under the RIA conditions.
社団法人日本原子力学会の論文
2004-01-25