Influence of span/depth ratio on the measurement of mode II fracture toughness of wood by end-notched flexure test
スポンサーリンク
概要
- 論文の詳細を見る
- Springerの論文
- 2001-02-25
著者
関連論文
- Accuracy of shear properties of wood obtained by simplified losipescu shear test
- Applicability of the losipescu shear test on the measurement of the shear properties of wood
- Prediction of the buckling stress of intermediate wooden columns using the secant modulus
- Measurement of the shear modulus of wood by static bending tests
- Young's modulus obtained by flexural vibration test of a wooden beam with inhomogeneity of density
- Measurement of the shear modulus of wood by asymmetric four-point bending tests
- Measurement of mode II fracture toughness of wood by the end-notched flexure test
- Estimation of the shear strength of wood by uniaxial-tension tests of off-axis specimens
- Calculation models of pressure and position of curved laminated veneer lumber in molds during pressing
- Influence of loading point on the static bending test of wood
- Measurement of bending properties of wood by compression bending tests
- Influence of span/depth ratio on the measurement of mode II fracture toughness of wood by end-notched flexure test
- Examination of the failure behavior of wood with a short crack in the radial–longitudinal system by single-edge-notched bending test