Operation and Design of Scrap Melting Process of the Packed Bed Type
スポンサーリンク
概要
- 論文の詳細を見る
A coke Packed bed type Scrap Melting process (PSM)with simultaneous high-rate injection of oxygen and pulverized coal was proposed which aims to achieve high heat efficiency, high productivity, high Fe yield and low refractory erosion with using not only shaft type furnaces but also basic oxygen converter (BOF) vessel. The experiments were made to verify the usefulness of the proposed process using the modified experimental blast furnace of 1 ton pig per tap scale and the modified experimental BOF of 10 ton pig per tap scale. A 3-dimensional mathematical simulation model was also developed in order to elucidate the physical and chemical conditions inside the furnace on the basis of transport phenomena and to make a basic design of commercial scale plant. Obtained results were summarized as follows:1) 100 % steel scrap can be melted into well carburized and well desulpherized pig iron using both 1 ton scale blast furnace and 10 ton scale BOF.2) The heat efficiency of about 80 %, the productivity per unit furnace volume of about 50 t/d·m3, Fe yield of more than 99 % and the erosion rate of refractory of less than 0.5 mm/charge were achieved throughout the experiments.3) These results were well justified by the 3-dimensional mathematical simulation model.4) A basic design of commercial scale plant was also performed by the use of the model.
- 社団法人 日本鉄鋼協会の論文
- 1999-07-15
著者
-
石田 博章
住友金属工業(株) 総合技術研究所
-
Ishida H
Tohoku Univ. Sendai
-
Ishida Hiroaki
Sumitomo Metal Industries Ltd.
-
TAKATANI Kouji
Corporate Research & Development Laboratories, Sumitomo Metal Industries, Ltd.
-
YAMAMOTO Takaiku
Corporate Research & Development Laboratories, Sumitomo Metal Industries, Ltd.
-
UJISAWA Yutaka
Corporate Research & Development Laboratories, Sumitomo Metal Industries, Ltd.
-
Ujisawa Yutaka
Sumitomo Metal Industries Ltd.
-
Takatani Kouji
Corporate Research & Development Laboratories Sumitomo Metal Industries Ltd.
-
YAMAMOTO Takaiku
Sumitomo Metal Industries Ltd.
-
ISHIDA Hiroaki
Corporate Research & Development Laboratories, Sumitomo Metal Industries, Ltd.
-
Takatani Kouji
Corporate Res. And Dev. Laboratories Sumitomo Metal Industries Ltd.
-
Yamamoto Takaiku
Sumitomo Metal Industies Ltd.
-
YAMAMOTO Takaiku
Corporate R&D Labs, Sumitomo Metal Industries Ltd.
-
UJISAWA Yutaka
Corporate R&D Labs, Sumitomo Metal Industries Ltd.
関連論文
- 181 炉内二次燃焼におよぼす水平羽口の効果 : 二次燃焼法の開発第 5 報(スクラップ溶解, 二次燃焼, 連鋳操業, 製鋼, 日本鉄鋼協会第 114 回(秋季)講演大会)
- 180 複合吹錬転炉における効率的なスクラップ溶解法 : 新スクラップ製鋼の開発第 2 報(スクラップ溶解, 二次燃焼, 連鋳操業, 製鋼, 日本鉄鋼協会第 114 回(秋季)講演大会)
- 討 11 転炉における炭材利用技術の開発(II 転炉における精錬機能の拡大, 第 113 回講演大会討論会講演概要)
- 161 複合吹錬転炉における溶鋼中窒素挙動 : 低窒素鋼溶製技術の開発 2(転炉吹錬, 製鋼, 日本鉄鋼協会第 113 回(春季)講演大会)
- ガス化溶融炉を用いた土壌の無害化処理技術の開発
- 高温治金反応を利用した廃棄物のガス化溶融システムの開発
- 霞ヶ浦底質中のダイオキシン低減化に向けた汚泥, 土壌及び掘出し焼却灰の無害化処理に関する研究
- 廃棄物ガス化溶融システムの開発(第2報)
- 廃棄物ガス化溶融システムの開発
- 728 酸素センサーによる転炉吹止成分の推定(センサーによる精錬反応の解析と制御 : シリコンセンサー, 転炉制御, 二次精錬等, 萌芽・境界技術, 日本鉄鋼協会第 114 回(秋季)講演大会)
- 充填層型スクラップ溶解における原料層高の影響 (充填層型スクラップ溶解法の開発-8)
- 充填層型鋼屑・鉱石溶解法の実証試験 (充填層型鋼屑・鉱石溶解法の開発-2)
- 充填層型スクラップ溶解への鉱石添加法の開発 (充填層型鋼屑・鉱石溶解法の開発-1)
- 充填層型スクラップ溶解における炉底出銑装置 (充填層型スクラップ溶解法の開発-7)
- 充填層型スクラップ溶解における錫銅板の脱錫挙動
- コ-クスベッドの活用による転炉内100%スクラップ溶解法
- コークスベッドの活用による転炉内 100% スクラップ溶解法(マンガン, クロム, 鉄の溶融還元とスクラップ溶解)(転炉機能の拡大)
- The Effect of the Change of Furnace Profile with the Increase in Furnace Volume on Operation
- Effect of Blast Furnace Profile on Inner Furnace States
- Mathematical Model for Transient Erosion Process of Blast Furnace Hearth
- Three-dimensional Dynamic Simulator for Blast Furnace
- Gasification and smelting system using oxygen blowing for plastic waste including polyvinyl chloride
- Molecular Dynamics Simulation of Martensitic Transformations in NiAl Alloy Using the Modified Embedded Atom Method (Condensed Matter: Structure, Mechanical and Thermal Properties)
- Gasification and Smelting System Using Oxygen Blowing for Municipal Waste
- Operation and Design of Scrap Melting Process of the Packed Bed Type
- Constitutive Trichloroethylene Degradation Led by tac Promoter Chromosomally Integrated Upstream of Phenol Hydroxylase Genes of Ralstonia sp. KN1 and Its Nucleotide Sequence Analysis
- Evaluation of Surface Tension of Molten Slag in Multi-component Systems
- Preface to the Special Issue on "Mathematical Modeling of Iron and Steel Making Processes"
- Raceway Design for the Innovative Blast Furnace
- Three-dimensional Mathematical Modeling and Designing of Hot Stove
- Mathematical Model for Transient Fluid Flow in a Continuous Casting Mold
- Preface to the Special Issue on "Advanced Application of Electromagnetic Force to Materials Processing"
- 住友金属改質型ガス化溶融炉の開発と実機成果
- Behavior of Stress Field in Packed Bed of Kokura No. 2 Blast Furnace during Filling and after Blow-in
- Effect of Coke Reactivity on Sinter Softening-melting Property by Simultaneous Evaluation Method of Carbonaceous and Ferrous Burdens in Blast Furnace
- Subjects for Achievement of Blast Furnace Operation with Low Reducing Agent Rate
- Effects of Electromagnetic Brake and Meniscus Electromagnetic Stirrer on Transient Molten Steel Flow at Meniscus in a Continuous Casting Mold
- Mathematical Modeling of Incompressible MHD Flows with Free Surface