Subjects for Achievement of Blast Furnace Operation with Low Reducing Agent Rate
スポンサーリンク
概要
- 論文の詳細を見る
The technology which reduces the reducing agent rate by the improvement in the reaction efficiency of blast furnace leads to reduction of hot metal manufacturing cost, but also solution of recent CO2 emission reduction. The subjects for achievement of the blast furnace operation with low reducing agent rate were described on reduction measures of the carbon consumption and problem of the measures referring to the example of reducing agent rate of the present state blast furnace concerning blast operation and reactive improvement. And, carried out concrete measures were introduced in order to aim at the low reducing agent rate operation.The following results were obtained.1) Since it has reached the already high reaction efficiency in present state blast furnace, it is not easy to attempt further reduction of the reducing agent rate.2) The blast furnace use of high reactivity coke or reduced iron is equal level or over it in comparison with the reduction effect by the assumed blast operation in this paper.3) The promotion of coke reaction load with the gasification is worried, when it aims at the low reducing agent rate operation by the high reactivity coke use.4) It is estimated that the threshold also exists for the reducibility of competing ore, when it aims at the low reducing agent rate operation using the high reactivity coke.5) The use of the low SiO2 sinter is effective for the improvement on the permeability in the blast furnace, when it aims at the low fuel rate operation. However, the new technology of the permeability improvement is desired, since there is some a limit for low SiO2 of the sintered ore, when future raw material supply and demand is considered.
著者
-
NAKANO Kaoru
Corporate Research & Development Laboratories, SUMITOMO METAL INDUSTRIES, LTD.
-
KOMATSU Shusaku
Corporate Research & Development Laboratories Sumitomo Metal Industries, Ltd.
-
Matsukura Yoshinori
Corporate R&d Labs. Sumitomo Metal Industries Ltd.
-
SUNAHARA Kohei
Corporate R&D Labs, Sumitomo Metal Industries Ltd.
-
YAMAMOTO Takaiku
Corporate R&D Labs, Sumitomo Metal Industries Ltd.
-
UJISAWA Yutaka
Corporate R&D Labs, Sumitomo Metal Industries Ltd.
-
NAKANO Kaoru
Corporate R&D Labs, Sumitomo Metal Industries Ltd.
-
KOMATSU Shusaku
Corporate R&D Labs, Sumitomo Metal Industries Ltd.
-
MATSUKURA Yoshinori
Corporate R&D Labs, Sumitomo Metal Industries Ltd.
関連論文
- Dissection Investigation of Blast Furnace Hearth-Kokura No. 2 Blast Furnace (2nd Campaign)
- The Effect of the Change of Furnace Profile with the Increase in Furnace Volume on Operation
- Effect of Blast Furnace Profile on Inner Furnace States
- Three-dimensional Dynamic Simulator for Blast Furnace
- Operation and Design of Scrap Melting Process of the Packed Bed Type
- Advanced Supporting System for Burden Distribution Control at Blast Furnace Top
- Effect of High Al_2O_3 Slag on the Blast Furnace Operations
- Behavior of Stress Field in Packed Bed of Kokura No. 2 Blast Furnace during Filling and after Blow-in
- A Theoretical Model for the Contact Phenomenon of Coke Particle Accompanied by the Compressive Breakage at the Contact Plane
- Development of a Size Degradation Model of Coke Particles at the Drum Test and inside the Blast Furnace
- Effect of Coke Reactivity on Sinter Softening-melting Property by Simultaneous Evaluation Method of Carbonaceous and Ferrous Burdens in Blast Furnace
- Subjects for Achievement of Blast Furnace Operation with Low Reducing Agent Rate